EQEmulator Forums - Help on ports please

Page 2 of 2

Show 40 post(s) from this thread on one page

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)

- Support::Windows Servers (https://www.eqemulator.org/forums/forumdisplay.php?f=587)

- - Help on ports please (https://www.eqemulator.org/forums/showthread.php?t=28785)

Producer_BMW

07-05-2009 05:31 PM

Every thing Boots up, fine just people can not enter

but did you get my message ?

Producer_BMW

07-05-2009 05:48 PM

Hello

I tried to respond to you did you get it

mixxit

07-05-2009 06:12 PM

hey yep,

did you setup dyndns to point to your IP?

Producer_BMW

07-05-2009 08:14 PM

no , i did not

cubber

07-07-2009 04:53 PM

EQEMU servers only require UDP ports they do not need or use TCP ports for anything except the web interface.

Here is what I forward note I took my zone ports down in the config file cause I do not boot 100+ zones.

9000 UDP
7000-7050 UDP (Zones)
5999 UDP (Private Login Server)
10234 UDP (UCS Chat Server)

You only have to forward 9080 if you want to make the web interface publically accessable. I usually leave this closed and only access the page locally or over VPN.

gaeorn

07-07-2009 05:58 PM

Quote:

Originally Posted by cubber (Post 173729)

EQEMU servers only require UDP ports they do not need or use TCP ports for anything except the web interface.

That is not entirely correct. World, zone and eqlaunch communicate with each other over TCP. Depending on your eqemu_config.xml settings, this traffic could be via the same IP address, needing ports to be opened for it.

All times are GMT -4. The time now is 08:09 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page