EQEmulator Forums - Issue with private lan server.

Page 3 of 3

Show 40 post(s) from this thread on one page

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)

- Support::Windows Servers (https://www.eqemulator.org/forums/forumdisplay.php?f=587)

- - Issue with private lan server. (https://www.eqemulator.org/forums/showthread.php?t=33849)

Kingmen30264

08-04-2011 12:43 PM

My modem is a westell e90-610014-16 and my router (Should it be beneficial to know) is a Belkin G Wireless F5D7234-4 V5. Hope this is all the information you will need :)

(Thank you for helping me btw :) )

joligario

08-04-2011 08:21 PM

Found a walkthru at http://mysite.ncnetwork.net/res08lyg/6100.htm

Kingmen30264

08-04-2011 09:37 PM

It worked.... sorta. I am having to use my router as the "modem" for the minute as to not change anything that I did to the actual modem. I followed everything it told me to do, only I cannot access my modem any longer through the designated IP (192.168.1.1).

I have a Belkin G Router, how do I "clone the mac address"?

joligario

08-05-2011 06:33 AM

If you're on the internet, then your ISP doesn't need you to clone the MAC address. Putting it in bridged mode basically makes it pass right through so you won't need to access your modem anyways.

Kingmen30264

08-06-2011 01:31 AM

Server Update:

IT WORKS!!!!!!!!!!!!

Only issue (I seem to have a lot of these =( ) Is that only ONE person can log onto my server at ANY given time. Here is a post of what my logs say:

Code:



[08.05. - 23:27:01] [WORLD__CLIENT] New connection from xx.xx.xxx.xxx:58068

[08.05. - 23:27:02] [NET__ERROR]xx.xx.xxx.xxx:58068: Received OP_SessionRequest in ESTABLISHED state (0)

[08.05. - 23:27:02] [NET__IDENTIFY] Unable to identify stream from xx.xx.xxx.xxx:58068 before it closed.

[08.05. - 23:27:02] [NET__IDENTIFY] Stream state was Closed

Now I am not sure what is causing this, but when ONE client tries to log in, it works just fine, but when a second client tries to log in, it keeps repeating this error.

I have all my ports up and running in all my firewalls, I just need to know how to allow more users.

Thanks again to all those that have helped me come this far, and thanks to those that will help me in the future. :)

Kingmen30264

08-07-2011 10:10 PM

Quote:

Originally Posted by luluxiu (Post 202092)

Files contained in EQEmuLoginServer.rar the proper use, will make you experience you correct the error. Download and install HeidiSQL let you see only a command prompt, rather than manipulate it can see the SQL table...

Say... Huh? I don't understand anything in this post that you just posted. Could you try elaborating a tad... please?

I installed everything in the server folder correctly, so I am not sure why it is not letting me allow more than one person at any given time to log onto my server, and then if they DO succeed in logging in, if they zone it crashes them and then they can't log on.

All times are GMT -4. The time now is 03:39 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page