I have it up to 2/5. Better than nothing :)

EDIT: Removed

You either do not have MySQL properly installed, or you did not follow the steps to add the directories to Visual Studio.

Thanks Lerxst, you are correct. I skipped a paragraph it would seem. Thanks.

I don't have the option to select "SVN Checkout" when I right-click these folders. Does anyone know what I am doing incorrectly? I only see:

• SVN Update
• SVN Commit...
• TortoiseSVN

If it says update/commit, then you have already checked out the folder before. Does it have a green checkmark on the folder?

Yes, it has a green check mark. But when I click on the folders, there is nothing inside but '.keep' ...as if it didn't update/download anything.

Looks like you might have checked out the wrong folder. Delete the .svn folder inside and re-checkout.

Cool. Thanks Joligario :)

Tried using VS C++ 2010 express but i couldnt get all 5 to build. 2 kept saying it couldnt find perl510.lib

I couldnt even find that file in the perl directory, i did find a 512.lib however. Is it because my perl is a newer version perhaps? Im a little new at this so forgive me. :)

Someone said I didn't have the VC++ directories set up properly. In my version of MS Visual C++, i get the following when I follow the directions:

VC++ Directories editing in Tools > Options has been deprecated. VC++ Directories are now available as a user property sheet that is added by default to all projects.

I right clicked all 5 projects and added the appropriate directories to each of the projects there. Is that not correct?

Edit: Nevermind. I grabbed 2010 instead of 2008 by mistake.

Umm
 

Been waiting on a reply for over a month now, ive redone the WHOLE thing, and i did it properly, but only thing that is still stumping me is the where am i supposed to put the 7000-7100 port thing, is it for TCP or UDP, cus i put 9000-9000 for UDP and TCP aswell has the 5000 for both like i was told. But no idea for the 7000 & im still getting this error when trying to start it once again

http://s1106.photobucket.com/albums/...rent=Error.png

Your zones should be UDP. Your 9000 should be TCP. Did you allow world/zone through your firewall?

still having the same problem. this is what my current set up for UDP/TCP looks like.

http://s1106.photobucket.com/albums/...nt=Current.png

Based upon your previous post, I didn't think you had a port problem anyways. What does your emu config look like?

http://s1106.photobucket.com/albums/...rent=Part1.png

http://s1106.photobucket.com/albums/...rent=Part2.png

the whole file is right there.

I didn't see an answer from a question previously: did you allow world.exe and zone.exe through windows firewall? Also, what does your start.bat file look like?

I never saw that question; how do u allow ur world.exe and zone.exe through firewall? and start.bat looks exactly like whats told to be posted.

http://s1106.photobucket.com/albums/...=Start-bat.png

Edit: I see question now, sorry bout ignoring that man.

Looks like you have Win7.

Go to Start -> Control Panel -> Windows Firewall
Verify the profile your current connection you are using is Home/Work (Private) network
Select Advanced Settings on the left
Select inbound. Scroll down to see if World and Zone are listed. If they are, ensure it matches your type of network (Private) and that it is set to Allow. If not, create a new rule for World.exe and Zone.exe files to allow on your private network. You may create public rules in addition if you want, but not necessary if your network is set to private and it will stay that way.

If allowing through the firewall doesn't solve it, try starting up the command prompt and running each of your start.bat commands individually. Start with world.exe and see what it says (copy/paste is better as the window should scroll). I suspect you should find your problem at this point.

Edit: When i try to do start world.exe it says cannot be found, along with start eqlaunch.exe


Still getting the EXACT same error, hasnt changed at all, when i try to use my start.bat to launch the server. even allowed zone/world through firewall and nothing, dont quite get what u mean with run each of the start.bat commands individually.

Start -> Run -> Command Prompt
Change to your eqemu directory
Type start world.exe and press enter
Copy/Paste everything from the world.exe window that opens up.

How do i change it to my eqemu directory.

When i go into Command Prompt, and type start world.exe and start eqlauncher.exe or w/e it says cannot be found.

cd c:\server or wherever your server files are.

I did that thanks, problem being, when i tried both suggestions made earlier to plug into when at c:/eqemu it just flashes a command prompt screen up real fast and closes

When i didnt add the start command into the command prompt, i get this.

http://s1106.photobucket.com/albums/...urrent=Odd.png

Your database is not named 'eq'. What is your database name?

Exactly what do you mean, like the name of my folder? or what.

No, the database has a name. In one of the steps it should have told you to type in "CREATE DATABASE XXX" and then "USE XXX". What did you use?

"Then right click on that same name (localhost_3306) and choose New Database...
In the next window, in the first line, type peq (then click OK)
Close Navicat Lite."

I named it what it says, peq?

So in your config, change the database from "eq" to "peq"

Also I recommend setting your default status to 0

Wow reading your thread and saw how you mentioned you had issues for over a month. Wish I would have checked it sooner, I am no expert at this but I would have sat down to go over it with you.
Hope you get the DB connection fixed and it works for you.
Post an update when you do.

wow i made alot of progress, same getting a TCP:9000 error though :/

Edit: umm actually its doing something completly new now, now it says wait 2000 miliseconds before booting the next zone, thats where its at though. I havent seen it do anything, whats supposed to happen once they command prompts run?

Re-Edit: i read that it stops at 5, both my world.exe and the 0:Sleeping stop at 5, and they have zero errors ; i found that out myself, i went to connect to it, and i dont even get like a loading screen to server select, any ideas?

This is what i get when i try to connect

http://s1106.photobucket.com/albums/...=StreamNet.png

I actually go to the point of making a char, but when i hit enter world, froze at Entering Crescent Reach. this is what my world.exe looks like atm with that going on.

http://s1106.photobucket.com/albums/...nknownDiss.png

http://s1106.photobucket.com/albums/...nteresting.png

I got a toon up and running actually in tutortial, now i know this isnt meant for thread, but i have looked all over forums, i cant find 2 things. 1. It says im a GM, but i have no commands, 2. How exactly do i code, like i see they add the links to code, but am i just supposed to put that in a blank notepad thingie or what, figured id ask you guys cus u seem pretty expert in what you do, and seems u guys prob run your own.

Also, i tried looking other places, how do i modify my hp? because when i set max level to 90, i have 5 hp, anyway to balance out tweak the hp values?

I've spent 6 hours trying to set up my own server (thanks, this guide is fantastic), however something has gone wrong.

---------------------------------------------
[04.20. - 18:38:13] Starting Log: logs/eqemu_debug_3428.log
[04.20. - 18:38:13] [LAUNCHER__INIT] Loading server configuration..
[04.20. - 18:38:14] [NET__WORLD] WorldConnection connect: Connecting to the server localhost:9000 failed: TCPConnection::Connect(): connect() failed. Error: 10061
[04.20. - 18:38:14] [LAUNCHER__ERROR] worldserver.Connect() FAILED! Will retry.
[04.20. - 18:38:14] [LAUNCHER__INIT] Starting main loop...


_____


---------------------------------------------
[04.20. - 18:41:37] Starting Log: logs/eqemu_debug_world_2820.log
[04.20. - 18:41:37] [WORLD__INIT] Loading server configuration..
[04.20. - 18:41:37] [WORLD__INIT] Log settings loaded from log.ini
[04.20. - 18:41:37] [WORLD__INIT] CURRENT_WORLD_VERSION:EQEmulator 0.8.0
[04.20. - 18:41:37] [WORLD__INIT] Added loginserver eqemulator.net:5998
[04.20. - 18:41:37] [WORLD__INIT] Connecting to MySQL...
[04.20. - 18:41:37] [WORLD__INIT_ERR] Cannot continue without a database connection.

It's not connecting to the database. Follow the same troubleshooting procedures and you should find out why.

Eqemu login server gives the error below. Can someone give me a hint what might be wrong?

[Debug] [05.06.11 - 00:49:05] Logging System Init.
[Debug] [05.06.11 - 00:49:05] Config System Init.
[Debug] [05.06.11 - 00:49:05] MySQL Database Init.
[Debug] [05.06.11 - 00:49:08] Encryption Initialize.
[Debug] [05.06.11 - 00:49:08] Encryption Loaded Successfully.
[Debug] [05.06.11 - 00:49:08] Server Manager Initialize.
[Network] [05.06.11 - 00:49:08] ServerManager listening on port 5998
[Debug] [05.06.11 - 00:49:08] Client Manager Initialize.
[Network] [05.06.11 - 00:49:08] ClientManager listening on Titanium stream.
[Network] [05.06.11 - 00:49:08] ClientManager listening on SoD stream.
[Debug] [05.06.11 - 00:49:08] Server Started.
[Network] [05.06.11 - 00:49:16] New world server connection from 127.0.0.1:64849

[Database] [05.06.11 - 00:49:16] Mysql query failed: SELECT WSR.ServerID, WSR.Se
rverTagDescription, WSR.ServerTrusted, SLT.ServerListTypeID, SLT.ServerListTypeD
escription, WSR.ServerAdminID FROM tblWorldServerRegistration AS WSR JOIN tblSer
verListType AS SLT ON WSR.ServerListTypeID = SLT.ServerListTypeID WHERE WSR.Serv
erLongName = 'SoloMan' AND WSR.ServerShortName = 'SoloMan'
[World] [05.06.11 - 00:49:16] Server SoloMan(SoloMan) attempted to log in but da
tabase couldn't find an entry but unregistered servers are allowed.
[Database] [05.06.11 - 00:49:16] Mysql query failed: SELECT max(ServerID) FROM t
blWorldServerRegistration
[Database] [05.06.11 - 00:49:16] Mysql query failed: UPDATE tblWorldServerRegist
ration SET ServerLastLoginDate = now(), ServerLastIPAddr = '127.0.0.1' where Ser
verID = 0

http://media.giantbomb.com/uploads/4...gain_super.jpg


just kidding, good job man