EQEmulator Forums - Localhost(LAN) Server

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)

- Support::Windows Servers (https://www.eqemulator.org/forums/forumdisplay.php?f=587)

- - Localhost(LAN) Server (https://www.eqemulator.org/forums/showthread.php?t=36267)

Localhost(LAN) Server

All right, so I have the server working, except for the fact I can't log in to the server, I will post the code below. Help is much obliged. :D

EQHost

Code:

[LoginServer]

Host=192.168.1.254:5998

EQ Emu Config

Code:

<?xml version="1.0">

<server>

        <world>

                <shortname>Rathe</shortname>

                <longname>The Rathe</longname>



                <!-- Only specify these two if you really think you need to.  (read: You don't) -->

                <address>server.dyndns.org</address> ##I realize these aren't necessary, but I saw it in a guide so I gave it a try.

                <localaddress>192.168.1.254</localaddress>



                <!-- Loginserver information.  Defaults shown -->

                <loginserver>

                        <host>192.168.1.254</host>

                        <port>5998</port>

                        <account></account>

                        <password></password>

                </loginserver>



                <!-- Server status.  Default is unlocked -->

                <!--<locked/>-->

                <!-- <unlocked/> -->



                <!-- Sets the ip/port for the tcp connections.  Both zones and console (if enabled).  Defaults are shown -->

                <tcp ip="localhost" port="9000" telnet="disable"/>



                <!-- Sets the shared key used by zone/launcher to connect to world -->

                <key>ZamthoSohtmaZ</key>

                

                <!-- Enable and set the port for the HTTP service.  Defaults are shown -->

                <http port="9080" enabled="false" mimefile="mime.types" />

        </world>



        <!-- Chatserver (channels) information.  Defaults shown -->

        <chatserver>

                <host>channels.eqemulator.net</host>

                <port>7778</port>

        </chatserver>



        <!-- Mailserver (in-game mail) information.  Defaults shown -->

        <mailserver>

                <host>channels.eqemulator.net</host>

                <port>7779</port>

        </mailserver>



        <zones>

                <defaultstatus>0</defaultstatus>



                <!-- Sets port range for world to use to auto configure zones -->

                <ports low="7000" high="7100"/>

        </zones>



        <!-- Database configuration, replaces db.ini.  Defaults shown -->

        <database>

                <host>localhost</host>

                <port>3306</port>

                <username>root</username>

                <password>root</password>

                <db>peq</db>

        </database>



        <!-- Launcher Configuration -->

        <launcher>

                <!-- <logprefix>logs/zone-</logprefix> -->

                <!-- <logsuffix>.log</logsuffix> -->

                <!-- <exe>zone.exe or ./zone</exe> -->

                <!-- <timers restart="10000" reterminate="10000"> -->

        </launcher>



        <!-- File locations.  Defaults shown -->

        <files>

                <!-- <spells>spells_us.txt</spells> -->

                <!-- <opcodes>opcodes.conf</opcodes> -->

                <!-- <logsettings>log.ini</logsettings> -->

                <!-- <eqtime>eqtime.cfg</eqtime> -->

        </files>

        <!-- Directory locations.  Defaults shown -->

        <directories>

                <!-- <maps>Maps</maps> -->

                <!-- <quests>quests</quests> -->

                <!-- <plugins>plugins</plugins> -->

        </directories>

</server>

This is the error I am experience, it doesn't stop it from loading, it just occurs, what's the fix for this?

Code:

Could not connect to login server: 192.168.1.254:5998 TCPConnection::Connect(); connect() failed. Error: 10061

Opcode.conf
change them to: what client are you using for older clients use 5998 SoD and higher use port 5999, i take it your using eqemulogin right? i pinged the server.
open up the ports on router and unblock firewalls etc let the software pass throw. what os are you using?

Code:

#Login opcodes

OP_SessionReady=0x0001

OP_Login=0x0002

OP_ServerListRequest=0x0004

OP_PlayEverquestRequest=0x000d

OP_PlayEverquestResponse=0x0022

OP_ChatMessage=0x0017

OP_LoginAccepted=0x0018

OP_ServerListResponse=0x0019

OP_Poll=0x0029

OP_EnterChat=0x000f

OP_PollResponse=0x0011

I still experience the error I posted earlier, I'm using the UF/HoT client. I have to call my ISP about opening ports, I don't have a firewall on. Windows 8.

change the port to 5999 on server and eqhost.txt change opcodes if using local network address in opcode.conf try that first don't forget to change loginserver etc. don't call to isp ok sorry haven't install windows 8 yet . after you make changes on server try to login again.

I have to call my ISP to get the ports forwarded.

no you don't need to call the isp if that is your dns server.dyndns.org it pings fine here. what kind of cablemodem do you have or the name of your router..

Your ISP has nothing to do with your ability to connect to a server inside your own network.

As directed, change your eqhost file to 5999 not 5998. 5998 is only used for titanium clients.

I know this, I was portforwarding them to allow others to access. I got 3306, 5998, 5999, 7000 - 7100 all portforwarded, anymore?

But I'm still flabbergasted by this error:

Code:

Could not connect to login server: 192.168.1.254:5998 TCPConnection::Connect(); connect() failed. Error: 10061

Host=192.168.1.254:5999 in eq, on server loginserver.ini loginport=5999,login.ini listen_port = 5999,eqemulogin Port=5999 change all them files and restart server again and try to login to server.
did you setup config.ini file and database.ini and db.ini file with your server and password etc?
example of config.ini

Code:

[Database]

host=localhost

user=root

password=root

database=peq

compression=off



[General]

quests=C:\EQEmu\quests\



wordwrap=1

Well.. ARE you using eqemuloginserver ? Or are you wishing to use eqemulator.org ?

Also, read your PM's if you haven't already.

what ghanja was trying to say was eqemulator.net not eqemulator.org lol. or do you want a private server setup for just you and your friends and not use eqemulator.net?

Quote:

Originally Posted by Noport (Post 216358)

what ghanja was trying to say was eqemulator.net not eqemulator.org lol. or do you want a private server setup for just you and your friends and not use eqemulator.net?

Woah, did Noport just attempt to correct my grammar? <grin>

Actually, Noport, either FQDN will resolve to the proper IP address. So while it is typically given as eqemulator.net --- eqemulator.org will work as well.

Silly Noport.

I would like this to be public for anyone to play. But the server doesn't like me. ;(

Change your eqhost.txt to read:

For Titanium client:

Code:

[LoginServer]

Host=eqemulator.net:5998

For SoD, SoF, UF client(s):

Code:

[LoginServer]

Host=eqemulator.net:5999

Then in your eqemu_config.xml:

Code:

                <loginserver>

                        <host>eqemulator.net</host>

                        <port>5998</port>

                        <account>your worldserver account name</account>

                        <password>and its password</password>

                </loginserver>

and re-remark these out:

Code:

                <!-- <address>server.dyndns.org</address> -->

                <!-- <localaddress>192.168.1.254</localaddress> -->

Restart server.

Noport strikes again.

http://i.imgur.com/Rgr5r.jpg

Quote:

Originally Posted by Secrets (Post 216371)

Noport strikes again.

best use of tard i've seen in a while.