EQEmulator Forums - Client Disconnected when first entering world

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)

- Archive::Windows Servers (https://www.eqemulator.org/forums/forumdisplay.php?f=617)

- - Client Disconnected when first entering world (https://www.eqemulator.org/forums/showthread.php?t=10358)

Client Disconnected when first entering world

I've managed to set up a server, installed minilogin, and can manage to log into my server with my username and password fine.

the zone files, world, and minilogin (all latest versions) all start fine.

my problem occurs when i try to enter the world with my newly created characters.

the world and zone files all start saying new client detected etc, weather starts, time starts.

then, as it looks like i'm about to zone in, I get Client Disconnected, and Removing Client appear in the world screens.

I've tried using other databases that i have seen listed in the other forums, run all the updated sql fiiles, installed all the doors and any other sql files that downloaded with the main install. and still i get disconnected as i'm about to enter the zone.

I've been searching through hundreds of posts here on these forums over the last three days, and am ready to give up.

any advice for one last ditch attempt?

Check the sticky post on NAT in the Tutorials section (I think) and see if that works for you.

Regards,

krich

Quote:

Originally Posted by krich

Check the sticky post on NAT in the Tutorials section (I think) and see if that works for you.

Regards,

krich

How is NAT going to help?

Wolf can you copy and paste the contents of the zone window.
I have had this problem before and it stemmed from the database.

And what database are you using?

NAT is the key to alot of probs, i was the 1017 king untill i found out a way around NAT. It can cause alot of login probs...

Kgaul

Quote:

Originally Posted by Chrysm

Quote:

Originally Posted by krich

Check the sticky post on NAT in the Tutorials section (I think) and see if that works for you.

Regards,

krich

How is NAT going to help?

Read the NAT post and you will see. The main problem being that most home NATing routers cannot NAT a packet coming from the private side with the destination of the public side ip. This causes some things to work while others do not. The post is also useful in that it hints at what the two ip addresses specified for zone are actually used for. The first is provided to the client by world as the ip the client should connect to. The second is the ip address the zoneserver uses to connect to the worldserver. This distinction is very important when setting up a server. Understanding this will help avoid certain types of common issues seen here on the forum.

Also, since there was really no detail posted, it was a SWAG. :D

Regards,

krich

I think what Chrysm was getting at is that the original poster said he was using minilogin and assumed he is not going through a router and therefore NAT would not apply in this case, but there isn't enough info in the original post to know for sure.

Sorry for not being clearer. The poster said that he cannot connect tho his own server using mini-login. I assumed the poster had read the how-to and assigned localhost to the ip values.

The only reason I answered this is because I had the same problems. All I did was update to the moving database instead of db.sql

So from what I read you get disconnect when the world tells you to hit a zone meaning you are possibly communicating with the world server but not reaching the zone application. I'm going to take a stab and propose that you messed up your boot5zones file and didn't put the right numbers in. Since you didn't share how your stuff is layed out (can't connect to it from internet side or local side, or all of this on same pc, etc etc), this is purely a guess to prod you out of more information.

Part 2 of the included guide in 5.0
2)Start up some zone.exe servers. 5 or so is normal. These also will give you mysql errors if it cant find the database. The hard part about zone.exe is you have to pass it command line options. A typical command to startup a zone server is

zone.exe . ZoneIP 7995 WorldIP <= replace the obvious parameters

Look at the batch file for some additional info up top.

sorry, was late so only posted help, here's some info:

Code:

REM: ****Read this first!!!****



REM: This file requires your real IP in the place of "YourIP" when you are connecting

REM: To the EQEmu Loginserver.



REM: When you are using minilogin, Replace all IP Addresses to say 127.0.0.1



REM: If you still get errors try using localhost instead of 127.0.0.1



REM:--------------Start-----------------------

@echo off



if NOT exist spells_en.txt goto NOSPELL



start zone . 127.0.0.1 7995 127.0.0.1

start zone . 127.0.0.1 7996 127.0.0.1

start zone . 127.0.0.1 7997 127.0.0.1

start zone . 127.0.0.1 7998 127.0.0.1

start zone . 127.0.0.1 7999 127.0.0.1

exit

cls



:NOSPELL

echo You did not copy the spells_en.txt from your everquest directory to this one.  Please do so or zones will crash on startup.

PAUSE



REM:---------------END------------------------

have tried this with my internet IP, my lan IP 192.168.0.1, and localhost in all possible combinations, same result as initial post.

Code:

### --- This file tells world.exe what loginserver to connect to.

### --- Leave the account and password field BLANK.



### --- Public Login is un-supported as is LAN playing. We recommend using the eqemulator.net Loginserver ALWAYS.



### --- NOTE: You can NOT use the word "Server" in worldname.

### --- NOTE2: the word "Server" is added to each server automatically.



# READ README.TXT

[LoginServer]

loginserver=192.168.0.1

loginport=5997

worldname=First test

worldaddress=192.168.0.1

locked=false



[WorldServer]

Defaultstatus=0

Unavailzone=



[LoginConfig]

ServerMode=Standalone

ServerPort=5997

UplinkAddress=

UplinkPort=

UplinkAccount=

UplinkPassword=

have tried this on world servers, shows my server fine, but am still unable to join the server, kicks me out at the same point.

Code:

[Database]

host=localhost

user=*****

password=******

database=eq

compression=off

my mySQl server connects fine, and have loaded up the database from tcsmyworld and his update. both loaded fine with no errors.

entered eqemu/eqemu login into database with 200 access as mentioned elsewhere in these forums, logs into those fine, and any others i create. just wont enter world.

minilogin:

Code:

C:\eqemu>minilogin

LoginServer.ini read.

MiniLoginAccounts.ini read.

Server mode: Standalone

Login server listening on port:5997

Matched 192.168.0.163 to 'eqemu'

Matched 192.168.0.163 to 'eqemu'

World:

Code:

C:\eqemu>world

[Status] CURRENT_WORLD_VERSION:EQEMu 0.5.0

[Status] Loading variables..

[Status] Loading zones..

[Status] Loading items..

[Status] EMuShareMem loaded

[Status] LoginServer.ini read.

[Status] Loading guild ranks..

[Status] Loading addon.ini..

[Status] Loading EQ time of day..

[Status] Reboot zone modes ON

[Status] Deleted 0 stale player corpses from database

[Status] Deleted 0 stale player backups from database

Warning: Pants may change during online play.

TCP listening on: 192.168.0.1:9000

World server listening on: 192.168.0.1:9000

Connected to LoginServer: 192.168.0.1:5997

188401 New TCP connection: 127.0.0.1:4370

188401 New TCP connection: 127.0.0.1:4371

188401 New TCP connection: 127.0.0.1:4372

188401 New TCP connection: 127.0.0.1:4373

188401 New TCP connection: 127.0.0.1:4374

New zoneserver: #1 127.0.0.1:4374

New zoneserver: #2 127.0.0.1:4373

New zoneserver: #3 127.0.0.1:4372

New zoneserver: #4 127.0.0.1:4371

New zoneserver: #5 127.0.0.1:4370

Zoneserver SetConnectInfo: 127.0.0.1:4370: 127.0.0.1:7995

Zoneserver SetConnectInfo: 127.0.0.1:4371: 127.0.0.1:7997

Zoneserver SetConnectInfo: 127.0.0.1:4372: 127.0.0.1:7999

Zoneserver SetConnectInfo: 127.0.0.1:4373: 127.0.0.1:7996

Zoneserver SetConnectInfo: 127.0.0.1:4374: 127.0.0.1:7998

595115 New client from ip: 192.168.0.163 port: 3305

Logged in: Local: eqemu

Received unknown opcode: 0x02d2 size:0 bytes

Attempting autobootup of rivervale (19) for Boopy

Zoneserver SetZone: 127.0.0.1:7995 rivervale (19)

Enter world: Boopy: rivervale (19)

Zoneserver SetZone: 127.0.0.1:7995 rivervale (19)

Client disconnected

Removing client from ip:192.168.0.163 port:3305

Zoneserver SetZone: 127.0.0.1:7995  (0)

Zoneserver SetZone: 127.0.0.1:7995  (0)

zone:

Code:

[Status] CURRENT_ZONE_VERSION: EQEMu 0.5.0

[Status] Loading Variables

[Status] Loading zone names

[Status] Loading items

[Status] EMuShareMem loaded

[Status] Loading items from database: count=25924, max id=68199

[Status] Loading npcs

[Status] Loading NPCTypes from database...

[Status] Loading npc faction lists

[Status] Loading NPC Faction Lists from database...

[Status] Loading loot tables

[Status] Loading Loot tables from database...

[Status] Loading doors

[Status] Loading Doors from database...

[Status] FileLoadSPDat() Loading spells from spells_us.txt

[Status] FileLoadSPDat() spells loaded: 4352

[Status] Loading guilds

[Status] Loading factions

[Status] Loading corpse timers

[Status] Loading what ever is left

[Status] Loading commands

[Status] 148 commands loaded

[Status] Entering sleep mode

Connected to worldserver: 127.0.0.1:9000

[Status] Weather should change in 3790 seconds

Init: Loading zone lists, zone state or spawn list, player corpsesZonepoints loa

ded into memory

, timezone data - Done. ZoneID = 19; Time Offset = 0

Reading zhdr file './cfg/rivervale.cfg'

Using database for safe coords.

Zone safe coords are x = 0; y = 0; z= 4

Reading zhdr file './cfg/rivervale.cfg'

Using database for safe coords.

Zone safe coords are x = 0; y = 0; z= 4

Using default zone header data...

Converting old zone data...

[Status] Loading Objects from DB...

[Status] Loading doors for rivervale ...

[Status] Done loading doors for rivervale ...

Petition 0 pettime = 0

[Status] Zone Bootup: rivervale (19)

Automatic shutdown

[Status] Zone Shutdown: rivervale (19)

as mentioned up top, i can get to the character select screen, but when i enter world, that is when i go.

also, in minilogin, i have allowed my other machines IP 192.168.0.1 access, and it logs in fine. it's just after the character select screen when the zone is loading that it disconnects me.

thanks for help

Maybe your system can't run zones and everquest on the same computer.

Quote:

Originally Posted by a_Guest03

Maybe your system can't run zones and everquest on the same computer.

am running everqest on one machine, and server on another.

no firewalls activated, including the XP default one, have 512megs ram in both machines.

no routers, using ICS to share internet. default windows networking used.

Quote:

start zone . 127.0.0.1 7995 127.0.0.1

I think you're confusing running a local server on the same machine as EQ, and running a seperate server. The world server will tell you that you need to connect to the zone server on 127.0.0.1:7995 and you don't have a zone running on your same computer as EQ.

I'm going to guess two things here - either a)you've got some numbers confused in your setup or b)at one point you had all the numbers right, but your zone files in your EQ box are corrupt or you have a virus.

If it's:
a) List out your machines ip and your worldservers internal ip and we'll hash out what your config files should be. I've been bored this week at work so I've been lurking around, thus I have time tomorrow hah ~
b) Virusscan if you haven't, and do a thorough check on your files when you patch.

Good luck ~

i'm running EQ on 192.168.0.163
server, mysql, zone files and minilogin are running on 192.168.0.1

thanks for the help

ps, did a virus scan with latest updates, all clear there.

so did you fix the problem?
make sure your start zone . 192.168.0.1 7999 192.168.0.1
are set up correctly to correspond to the correct ips