Precompiled EQEmu 6.1 DR2 with memory leak detector
 

Hello, I decided to include some memory leak detector both for zone and world, so if you want to contribute, just use my binaries, and when you exit zone and world (after letting them being on some time, with clients and so), post here the output of EQEmuWorld_MemoryLeaks.log and EQEmuZone_MemoryLeaks.log

Links:
World and EmuShareMem:http://cofruben.krusher.org/eqemu/6....ldShareMem.zip

Zone with no perl enabled:http://cofruben.krusher.org/eqemu/6.1DR2ZoneNoPerl.zip

Zone with perl enabled:http://cofruben.krusher.org/eqemu/6.1DR2ZonePerl.zip
Opcodes:
cofruben.krusher.org/eqemu/opcodes.conf

also, the binaries are NOT tested, and I'm sure they won't work correctly like the original ones.

Good luck, if there's any problem, just say..

CVS Source
 

Any chance I can get the 0.6.1 DR2 Source yet? If so, where from? The sf.net CVS is still 0.6.1 DR1...

Thanks,
-Suede-

world error
 

I gave this a try and got the following error.

C:\eq_emu_6.2p>world
Allocated 12 bytes at address 00362708 (file: c:\documents and settings\cofruben
\escritorio\c++\eqemu\copia de source\common\tcpconnection.cpp, line: 1434)
Allocated 20 bytes at address 00362780 (file: c:\documents and settings\cofruben
\escritorio\c++\eqemu\copia de source\world\loginserver.cpp, line: 78)
Allocated 300 bytes at address 00364CF0 (file: c:\documents and settings\cofrube
n\escritorio\c++\eqemu\copia de source\world\loginserver.cpp, line: 79)
Allocated 20 bytes at address 00364E48 (file: c:\documents and settings\cofruben
\escritorio\c++\eqemu\copia de source\common\tcpconnection.cpp, line: 105)
Allocated 20 bytes at address 00364E88 (file: c:\documents and settings\cofruben
\escritorio\c++\eqemu\copia de source\common\tcpconnection.cpp, line: 106)
Allocated 11 bytes at address 003655B0 (file: c:\documents and settings\cofruben
\escritorio\c++\eqemu\copia de source\common\dbcore.cpp, line: 237)
Allocated 5 bytes at address 003655E8 (file: c:\documents and settings\cofruben\
escritorio\c++\eqemu\copia de source\common\dbcore.cpp, line: 238)
Allocated 3 bytes at address 00365620 (file: c:\documents and settings\cofruben\
escritorio\c++\eqemu\copia de source\common\dbcore.cpp, line: 239)
Allocated 4 bytes at address 00365650 (file: c:\documents and settings\cofruben\
escritorio\c++\eqemu\copia de source\common\dbcore.cpp, line: 240)
Allocated 188 bytes at address 003679B8 (file: c:\documents and settings\cofrube
n\escritorio\c++\eqemu\copia de source\common\dbasync.cpp, line: 22)
Allocated 40 bytes at address 00367B90 (file: c:\documents and settings\cofruben
\escritorio\c++\eqemu\copia de source\common\dbasync.cpp, line: 24)
Allocated 4 bytes at address 00367BE8 (file: c:\documents and settings\cofruben\
escritorio\c++\eqemu\copia de source\common\dbasync.cpp, line: 208)
Allocated 12 bytes at address 00367C50 (file: c:\documents and settings\cofruben
\escritorio\c++\eqemu\copia de source\common\dbmemleak.cpp, line: 23)
Allocated 248 bytes at address 00367C88 (file: c:\documents and settings\cofrube
n\escritorio\c++\eqemu\copia de source\common\debug.cpp, line: 22)
[Status] CURRENT_WORLD_VERSION:EQEMu 0.6.1-DR2
[Status] Loading opcodes..
Allocated 32 bytes at address 00367E60 (file: c:\documents and settings\cofruben
\escritorio\c++\eqemu\copia de source\world\net.cpp, line: 210)
Allocated 248 bytes at address 003821C8 (file: c:\documents and settings\cofrube
n\escritorio\c++\eqemu\copia de source\common\debug.cpp, line: 22)
[Status] EMuShareMem loaded
Opcode OP_ExploreUnknown is missing from ./opcodes.conf
Opcode OP_DeleteItem is missing from ./opcodes.conf
Opcode OP_LogoutReply is missing from ./opcodes.conf
Opcode OP_EnterTutorial is missing from ./opcodes.conf
Opcode OP_ReturnHome is missing from ./opcodes.conf
Opcode OP_FloatListThing is missing from ./opcodes.conf
Opcode OP_SetTitle is missing from ./opcodes.conf
Opcode OP_SetTitleReply is missing from ./opcodes.conf
Opcode OP_AdventurePointsUpdate is missing from ./opcodes.conf
Opcode OP_ZoneInUnknown is missing from ./opcodes.conf
Opcode OP_ZoneGuildList is missing from ./opcodes.conf
Opcode OP_SendTitleList is missing from ./opcodes.conf
Error: EMuShareMem: DLLLoadOpcodes: !cbDBLoadOpcodes
[Error] Loading opcodes failed. I cant live like this!
Attempt to delete unknown pointer: 00000000

Which opcodes.conf should i be using, this one is from minilogon 6.1 i think.

:)

thats what happened to me also , looking forward to tying this .

Where are the new logs kept??
 

This works FINE... (the usual bugs in group and trade, and the guards of course).. but otherwise it's as stable as a rock...where are the logs you refer to put????.. if I can find them i will post them here for you...
Thanks...

what database and or opcodes are you using with that Templar?

I have same problems than you sakrateri...

This is my setup..
 

I'm using the opcodes I got from Belfedia's download link.. LOL.. and the database was just created by doing the normal upgrade to velious from PEQ..
sorry I can't be more help, I'm amazed that something worked right for me almost first time!!!!!!!..

Ok thanks Temp , I will try to work on it some more . Could you paste a copy of your wolrd output here for me please?

nothing I can do if that does not work for you guys :(, at least not this and next week, I am full with exams. Try to get a different opcode file from someone who has it working. I will try to fix it in some time.

The files are eqemuworld_memoryleaks.log and same with zone I guess, in the same path as binaries...if that does not show, maybe I programmed it incorrectly, so let me know...

Thanks

Take those exams and do well , this can wait for sure :)

From which links you take opcode.conf ?
I use one from CVS and i link only this ???
that very strange, search more :)

Good luck cofruben :) i hope the best for you :)

Sorry I didn't see your message....
 

I will, of course, Sakrateri.. I'm working for a few days, I'll post the output by the weekend.

:)

I receive the same error. I would also like to ask though, does someone have an opcodes.conf that will work with 6.1? Mine is posted below:

I can't locate this opcode files, i try all in my a link and same error,
can you link or email your opcode templar ? that help all people, i think.