EQEmulator Forums

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)
-   Support::Windows Servers (https://www.eqemulator.org/forums/forumdisplay.php?f=587)
-   -   Static Zones (https://www.eqemulator.org/forums/showthread.php?t=20649)

Eldreath 05-19-2006 04:56 PM

Static Zones
 
I was curious if it was possible to set up static zones from the Launcher_Zone table in the db. I mean the short name of zone is not a problem nor is the port to use but I'm not sure what goes under the Launcher column. Or hell I might be going about it all wrong I have searched the boards and seen most ppl talk about the boot5zone.bat but have searched high and low for this file in the eqemu folder and I dont have one heh Im using the 0.7.0-790 on a public run server I made any suggestions would be great thanks

rojadruid 05-19-2006 05:04 PM

Quote:

Originally Posted by Eldreath
I was curious if it was possible to set up static zones from the Launcher_Zone table in the db. I mean the short name of zone is not a problem nor is the port to use but I'm not sure what goes under the Launcher column. Or hell I might be going about it all wrong I have searched the boards and seen most ppl talk about the boot5zone.bat but have searched high and low for this file in the eqemu folder and I dont have one heh Im using the 0.7.0-790 on a public run server I made any suggestions would be great thanks


Read the wiki, and use the html server in the server. you can setup the launcher from there.


All times are GMT -4. The time now is 05:01 AM.

Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.