Having a problem login in after created char
 

After i make a char, eq dies and goes back to windows
World.exe
LoginServer.ini read.
Using database 'eq' at localhost
Loading zone names & items...done.
Loading guild ranks...done.
World server listening on: port 9000
Connected to LoginServer: eqlogin1.eqemu.org:5999
New TCP connection: 192.168.1.1:1663
New TCP connection: 192.168.1.1:1664
New zoneserver: #1 192.168.1.1:1663
New zoneserver: #2 192.168.1.1:1664
New TCP connection: 192.168.1.1:1665
New TCP connection: 192.168.1.1:1666
New zoneserver: #3 192.168.1.1:1665
New TCP connection: 192.168.1.1:1667
New zoneserver: #4 192.168.1.1:1666
New zoneserver: #5 192.168.1.1:1667
Zoneserver SetConnectInfo: 192.168.1.1:1665: 68.49.40.104:7998
Zoneserver SetConnectInfo: 192.168.1.1:1664: 68.49.40.104:7995
Zoneserver SetConnectInfo: 192.168.1.1:1663: 68.49.40.104:7999
Zoneserver SetConnectInfo: 192.168.1.1:1667: 68.49.40.104:7996
Zoneserver SetConnectInfo: 192.168.1.1:1666: 68.49.40.104:7997
52726 New client from ip: 192.168.1.1 port: 1673
Logged in: LS#7091: Pcpro
Sending list of guilds
Unknown opcode: 0x3521 size:2056
Unknown opcode: 0x3921 size:2056
Unknown opcode: 0x9221 size:4
0: 31 26 22 2A | 1&"*
Unknown opcode: 0x9220 size:12
0: 00 00 00 12 00 00 00 00 - 00 00 00 00 | ............
Maxclients: -1
Attempting autobootup of 'freportw' for Ownage
Zoneserver SetZone: 68.49.40.104:7996 freportw
Enter world: Ownage: freportw
Zoneserver SetZone: 68.49.40.104:7996 freportw
Client disconnected
Removing client from ip:192.168.1.1 port:1673
Zoneserver SetZone: 68.49.40.104:7996
Zoneserver SetZone: 68.49.40.104:7996


boot5zone.bat
Using database 'eq' at localhost
Loading zone names, items & NPCs...done.
SPDat not found ('spdat.eff'), spells not loaded.
Loading guild ranks...done.
Loading faction data...done.
Connected to worldserver: 68.49.40.104:9000
Entering sleep mode
Map: Maps\freportw.map not found.
ZoneID = 9
Reading zhdr file './cfg/freportw.cfg'
Using database for safe coords.
Zone safe coords are x = 181; y = 335; z= 0
Petition 0 pettime = 0
-----------
Zone server 'freportw' listening on port:7996
-----------
79504 New client from ip: 192.168.1.1 port: 1675
Login packet 1 (OP_SetDataRate = 5)
Login packet 2
Loaded playerprofile for Ownage - size: 8244/8244
Loaded alt_adv_table for Ownage - size: 256/256
Login packet 3
Zhdr request (Login 4)
Sending zonepoints...done
Sending objects...done
Enterzone complete (Login 5)
Sending doorspawns...done
0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
16: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
32: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
48: 4F 77 6E 61 67 65 00 00 - 00 00 00 00 00 00 00 00 | Ownage..........
64: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
80: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
96: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
112: 01 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
128: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
144: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
160: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
176: 00 00 00 00 | ....
Velan_Torresk01: Aggro Added! Calculated aggrorange: 25600
Ownage hit for 18, 20 left.
Mobs currently Aggro: 0
Player Ownage has died.
Velan_Torresk01: Aggro Added! Calculated aggrorange: 25600
Mobs currently Aggro: 0
Player Ownage has died.
Velan_Torresk01: Aggro Added! Calculated aggrorange: 25600
Client disconnected: Ownage
Dropping client: Process=false, ip=192.168.1.1, port=1675
Mobs currently Aggro: 0
Automatic shutdown
Message:----SERVER SHUTDOWN----
Zone shutdown: going to sleep

Lose the router. do not use 192.168.* numbers as ANY of the IP addresses. You need to use the virgin IP address for the computer (plugged directly into the internet).


Routers will mess up EQEmu.

then this program is useless, thanks anyways i am going to go use the other program.

No its not useless :) your router is just useless lol.. it would probably work if you use your real IP address. when you use an IP address other than your "real" ip address, it confuses the loginserver (AOL can do this too because of its proxy).

Some people can get it working with the router if its set up properly to foward the ports, ect but its not something i care to learn about and/or explain. I always tell people to try it without the router and see if it works (it will).

Anytime you want to run a "server" from behind a router you have to know how to configure the router.

[ramblings]
If some computer on the internet tries to connect to you IP, the router has no clue which computer on your lan to send the data to (unless you setup your router). FTP HTTP ect are different, your computer is the one making the connection OUT the router. The IP addresses 192.168.*.* mean NOTHING to the computer on the internet side of your router.
[/ramblings]

Take a look at "the big lan book" post in this forum for help setting things up.

ok, just to let you know, i do know how to setup the router the right way it forwards all of the ports to this box. and btw that box is trying to connect to that server anyways the program is only useless to me, i think it is a good program it just that i want to play lan with my brother but that is not going to happen with this program.

Well yes it can happen if you set up "PublicLogin".

well for JUST lan play, you can put in your Lan IP and it will work. Anyone on the internet on't be able to log in though. If you do that, PLEASE say private or something in your server name. and don't run it when your not playing.

Or just setup your router right, and both internet and lan users can log in. Granted some routers don't like to port foward when you give the external IP of the router as the destination from inside your lan. But that is a problem with your router, not the emu.

*cough* if people would give it up and pay for their internet access we wouldnt have thie big problems with 192.* IP's =P

hmm, i was paying for more ips some time ago, but comcast cant do it like @home did so it did not work and had to buy a router because u cant have more then one cable modem in a house. and so there is your answer to not paying for ips...

I have two cable modems in my house :) and an extra IP on top of that (3 ip's in all). I like the direct connection on all of my comps because i know i dont have to worry about 192.* ip's or port fowarding or extra hardware interfearing with my connection.

well i cant to anything like that because comcast cant do anything right.