EQEmulator Forums - Can't connect to EQEmu Login Server using WAN settings, only LAN

First off, thanks to everyone involved in getting this EQEmulator stuff working! Really brings back some memories...

Now as to my problem.

Thread title's a little confusing, so I'll try to explain. If I set up my login server with LAN settings, everything works fine. I can start the server executables, log in, and party (by myself) like it's 1999:

eqemu_config.xml

Code:

<world>

  <shortname>(My Server Name)</shortname>

  <longname>(My Server Long Name)</longname>



  <!-- Only specify these two if you really think you need to.  (read: You don't) -->

  <address>127.0.0.1</address>

  <localaddress>127.0.0.1</localaddress>



  <!-- Loginserver information.  Defaults shown -->

  <loginserver>

    <host>127.0.0.1</host>

    <port>5998</port>

    <account></account>

    <password></password>

  </loginserver>



...



  <!-- Sets the ip/port for the tcp connections.  Both zones and console (if enabled).  Defaults are shown -->

  <tcp ip="localhost" port="9000" telnet="disable"/>



  <!-- Sets the shared key used by zone/launcher to connect to world -->

  <key>some long random string</key>

                

  <!-- Enable and set the port for the HTTP service.  Defaults are shown -->

  <http port="9080" enabled="false" mimefile="mime.types" />

</world>

But if I try to set it up using a dyndns address I made, my world.exe can't connect to my login server. I'm trying to get this set up over a WAN so I can play with some friends throughout the country.

eqemu_config.xml

Code:

<world>

  <shortname>(My Server Name)</shortname>

  <longname>(My Server Long Name)</longname>



  <!-- Only specify these two if you really think you need to.  (read: You don't) -->

  <address>myserver.dyndns.org</address>

  <localaddress>192.168.0.101</localaddress>



  <!-- Loginserver information.  Defaults shown -->

  <loginserver>

    <host>myserver.dyndns.org</host>

    <port>5998</port>

    <account></account>

    <password></password>

  </loginserver>



...



  <!-- Sets the ip/port for the tcp connections.  Both zones and console (if enabled).  Defaults are shown -->

  <tcp ip="localhost" port="9000" telnet="disable"/>



  <!-- Sets the shared key used by zone/launcher to connect to world -->

  <key>some long random string</key>

                

  <!-- Enable and set the port for the HTTP service.  Defaults are shown -->

  <http port="9080" enabled="false" mimefile="mime.types" />

</world>

world.exe log

Code:

...

[02.13. - 21:26:41] [NET__IDENTIFY] Registered patch 6.2

[02.13. - 21:26:41] [NET__IDENTIFY] Registered patch Titanium

[02.13. - 21:26:41] [NET__IDENTIFY] Registered patch SoF

[02.13. - 21:26:41] [WORLD__LS] Connecting to login server...

[02.13. - 21:26:43] [WORLD__LS_ERR] Could not connect to login server: TCPConnection::Connect(): connect() failed. Error: 10061

[02.13. - 21:26:51] [WORLD__LS] Connecting to login server...

[02.13. - 21:26:52] [WORLD__LS_ERR] Could not connect to login server: TCPConnection::Connect(): connect() failed. Error: 10061

[02.13. - 21:27:01] [WORLD__LS] Connecting to login server...

[02.13. - 21:27:02] [WORLD__LS_ERR] Could not connect to login server: TCPConnection::Connect(): connect() failed. Error: 10061

[02.13. - 21:27:11] [WORLD__LS] Connecting to login server...

(And so on)...

I do have TCP and UDP ports 7000-7100 and 9000 forwarded to my server machine (192.168.0.101).

Any ideas on what I might be doing wrong?