EQEmulator Forums - [WORLD_LS_ERR] Could not connect to login Server!

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)

- Support::Windows Servers (https://www.eqemulator.org/forums/forumdisplay.php?f=587)

- - [WORLD_LS_ERR] Could not connect to login Server! (https://www.eqemulator.org/forums/showthread.php?t=30598)

[WORLD_ZONE] [5] Lockup/Sleep/Freeze

[WORLD_LS]Connecting to login server...
[WORLD_LS_ERR] Could not connect to login server: TCPConnection::Connect(): connect() failed. Error: 10060

Above issue solved, please scroll down to new arising issue.

Is world.exe on the "allow" list in your windows firewall?

Yup.

I set it up exactly as according to this guide, just for info:
http://www.eqemulator.org/forums/showthread.php?t=29043

----

I turned off windows firewall, still no improvement. Still getting the same error.

Also, when it first opens, it gives me a red-x crash error for "EQEmuLoginServer.exe"

It will load the first 5 dynamic zones, and it connects to WORLD_ZONE, but after not 15 seconds, it's back to login server error again.

My eqemu_config:

Code:

<server>

          <world>

                <shortname>name</shortname>

                <longname>long name</longname>

                <loginserver>

                              <host>192.168.1.47</host>

                              <port>5998</port>

                              <account></account>

                              <password></password>

                <address>192.168.1.47</address>

                <localaddress>192.168.1.47</localaddress>

           </world>

           <database>

                <host>localhost</host>

                <port>3306</port>

                <username>root</username>

                <password>eq</password>

                <db>peq</db>

           </database>

</server>

Okay, I took the /world and moved it BEFORE the loginserver info, and it now connects, even though I still get a fatal error from EQEmuLoginServer.exe

Now, it's building the server, and it slept (paused) when it got to "WORLD_ZONE [5] auto zone port configuration. telling zone to use port 7004" and that's where it's at now.

It doesn't say/do anything else, and when I try to connect over the LAN, the login screen gives me "Network Unavailable"