EQEmulator Forums

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)
-   Misc::Off Topic (https://www.eqemulator.org/forums/forumdisplay.php?f=595)
-   -   Add Remote Users to a Server Computer (https://www.eqemulator.org/forums/showthread.php?t=32685)

Ash Zidan 12-14-2010 02:30 PM

Add Remote Users to a Server Computer
 
Hello everybody,
I want to add remote user (located on other computers on a lan) to groups I have initiated on my server.
When I try to do that, the only location available shown to me is the server itself.... so what do I have to do??

Thanks for everybody.

provocating 12-14-2010 03:27 PM

That is pretty vague, more information is needed to even make a response.

Adding remote users for Windows accounts or for EqEmu users ??

Ash Zidan 12-14-2010 03:56 PM

Of course for windows accounts
The issue my friend is that I have a windows server 2008 on a LAN
and I want to create groups and add users from other computers on that LAN to these groups...
What I really face is the absence of the other location when I click Locations to add users from.
These are the steps i do:
Computer(right click)->Manage->Configuration->Local Users And Groups->Groups->(right click)->New Group->Add->Locations!
here is the problem!! No locations but the server itself!!!

Chanus 12-14-2010 03:58 PM

The computers you're adding can't be Home/Basic editions of Windows, I don't think... if that helps.

provocating 12-14-2010 04:01 PM

I am guessing you are trying to add computer accounts to a domain server ? I do know you cannot add a computer to a domain with a home version of windows, and I am pretty sure you cannot remote into other computers on your network unless they are pro or better versions of windows.

Ash Zidan 12-14-2010 04:01 PM

They are WINXPs professional!!!

provocating 12-14-2010 04:02 PM

So you are trying to add pro workstations to the domain ? Just making sure before I give you a step by step.

Ash Zidan 12-14-2010 04:03 PM

No not domain... LAN

provocating 12-14-2010 04:06 PM

If you are just doing this for access purposes, so that you are not presented with a login when accessing the server then you just need to add a local account with the exact same credentials as the workstation. Then you pass authentication and not presented with a login. If you are trying to do this all from a workstation that is not part of the domain, give it up because you cannot do it. That is part of the security, you are not a member of the domain.

Ash Zidan 12-14-2010 04:12 PM

The first choice....
but can you be more precise please??
by the way forget about the title of the question.... I don't want remote users..

provocating 12-14-2010 04:36 PM

Okay, so you just want to be able to access the files on the server correct ?

On the 2008 server do this.

Click Start, in the white textbox type without quotes "local users"

In the local users box there you should be able to right click and add local users, give them some access rights and set the passwords for the users. It is essential that each user have the exact same password as the local workstation account does. If the login and password are exactly the same then you will have access to the server. Next thing is to setup a shared folder on the server somewhere and add those users giving them appropriate rights. Other than that, you should be okay.

Ash Zidan 12-14-2010 04:42 PM

Thanks for your efforts....
I'll try that out..

provocating 12-14-2010 04:46 PM

Just remember as long as the local accounts and the server account match verbatim, then you will have access to the server. Past that of course they have to have something to get to (The shared folder) and also have some type of rights to it. If you give a person admin rights to the server then they can always get to the admin share on the folder, which is there by default unless you take it away. So if you setup a server by the name of MyServer you can access it's c drive by going.

\\MyServer\c$

Or if you make a shared folder by the name of Shared then it would be like this.

\\MyServer\Shared

You can just type that in the url bar in My Computer or anywhere else, even Internet Explorer I think.


All times are GMT -4. The time now is 10:08 PM.

Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.