EQEmulator Forums

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)
-   Support::General Support (https://www.eqemulator.org/forums/forumdisplay.php?f=598)
-   -   Test Firewall on "Minnesota EQ" Server (https://www.eqemulator.org/forums/showthread.php?t=40715)

gothmonk 06-26-2016 01:28 AM

Test Firewall on "Minnesota EQ" Server
 
Would anyone mind attempting to connect to my server, Minnesota EQ? I just wanted to confirm my firewall rules are setup correctly. I haven't seen anyone join, so I am unsure if I have it setup correctly. I have 7000-7500 UDP forwarded to the internal IP, as well as 9000 UDP forwarded to the internal IP.

Didn't know where else to put this, thanks in advance.

NatedogEZ 06-26-2016 01:57 AM

I can't get to character select.

gothmonk 06-26-2016 02:10 AM

Sorry, I was bringing it up & down.. It's up now.

gothmonk 06-26-2016 02:15 AM

I also flipped UDP to TCP & UDP.. Reading lots of conflicting information if it's just UDP or TCP+UDP. Windows Firewall is off on the server.

gothmonk 06-26-2016 02:20 AM

Looks like the world server listens on UDP/9000 & TCP/9000. Zone listens on UDP/7000 to UDP/7029. UCS listens on UDP/7500. That may have been the problem with world server listening on TCP/9000... it was blocked. TCP & UDP 9000 are now open all the way through. I don't see any reason why a test connection to character select should not work at this point.

gothmonk 06-26-2016 02:21 AM

If someone can test it, I will be leaving it up.. Thanks in advance.

NatedogEZ 06-26-2016 03:24 AM

Looks like it is working now ;)

gothmonk 06-26-2016 08:46 AM

Quote:

Originally Posted by NatedogEZ (Post 249617)
Looks like it is working now ;)

Thank you. I'm usually pretty good with firewalls, I just didn't know the TCP & UDP port requirements.. The documentation is very vague about TCP vs UDP.

ghanja 06-26-2016 03:02 PM

EQEMU Required:
Quote:

TCP/UDP 5998 - 5999 Login Server(s) (Cannot change port hardcoded in client)
UDP 7000-7xxx Zone Servers (Default range but of course can be configured)

Optional but recommended:
Quote:

UDP 7778 UCS (Default Port)

Optional (possible security risk unless you have like pfSense, etc. and even then):
Quote:

TCP 9000 EQEMU Telnet (Default Port)
TCP 9080 Remote Admin (Built into EQEMU)
TCP 3306 MySQL (Default) - not optional if you wish to use EOC (best with firewalls allowing source IP configuration)

EQEMU2010 06-26-2016 11:20 PM

I connected to it iirc and /q just to test for you but I was about to head into work so Just now getting back on PC

Akkadius 06-26-2016 11:33 PM

Who lives in Minnesota anyways

creakin 06-30-2016 09:00 AM

As long as your not from the "boring" southern two-thirds of Minnesota, your safe to say that you are from here :grin:

Maze_EQ 06-30-2016 10:51 AM

Tell me you're not from Lansing or Grand Rapids.


All times are GMT -4. The time now is 04:57 AM.

Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.