Ok I updated the ip to my ip using the command prompt (checked that it worked with mysqlCC) and this is the result in world.exe during the "loading" while it's essentially waiting to boot me back to initial login screen...
After:
[05.18. - 16:20:56] [WORLD__ZONE] [6] Auto zone port configuration. Telling zone to use port 7005
It says this:
[05.18. - 16:21:19] [WORLD__CLIENT] New connection from 192.168.1.2:1618
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: First opcode 0x4dd0 did not match expected 0x2792
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: Tried patch 6.2_world, and it did not match.
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: First opcode 0x4dd0 did not match expected 0x2ec9
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: Tried patch 6.2_zone, and it did not match.
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: First opcode matched 0x4dd0 and length matched 464
[05.18. - 16:21:19] [NET__IDENTIFY] Identified stream 192.168.1.2:1618 with signature Titanium_world
[05.18. - 16:21:19] [WORLD__CLIENT] New client from 192.168.1.2:1618
[05.18. - 16:21:19] [WORLD__CLIENT_ERR] : ID is 0. Is this server connected to minilogin?
[05.18. - 16:21:19] [WORLD__CLIENT_ERR] : Could not find a minilogin account, verify ip address logging into minilogin is the same that is in your account table.
Do I still need the php updater? I'm pretty sure that doing UPDATE blahblahblah WHERE blahblahblah; works too, right?
Any ideas or help is appreciated, thanks.
|