[trevius]

Here is another slightly more complicated plugin similar to the random roam, accept this one will only go in straight lines, North, South, East, or West. It also checks the LoS slightly further than how far it actually plans to move, to help keep NPCs away from walls a little. The main use for this one is indoor areas that line up well with the X Y axis. It still isn't nearly as good as real pathing in indoors, but it can give your NPCs a little life without too much work and without looking too buggy.

To install this plugin, just follow the steps for the previous plugin and name this one's file "straightpath.pl"

#Usage: plugin::StraightPath(MaxXVariance, MaxYVariance);

sub StraightPath {
	
	my $npc = $_[0];
	my $MaxXVariance = $_[1];
	my $MaxYVariance = $_[2];
	
	# Don't try to roam if already engaged in combat!
	if ($npc->IsEngaged() != 1) {
		#my $AtGuardSpot = 0;	

		#Get needed Locs
		my $CurX = $npc->GetX();
		my $CurY = $npc->GetY();
		#my $CurZ = $npc->GetZ();	#Not currently required by this plugin
		my $OrigX = $npc->GetSpawnPointX();
		my $OrigY = $npc->GetSpawnPointY();
		my $OrigZ = $npc->GetSpawnPointZ();
		my $GuardX = $npc->GetGuardPointX();
		my $GuardY = $npc->GetGuardPointY();

		if ($CurX == $GuardX && $CurY == $GuardY) {	#If the NPC has finished walking to the previous given Loc
			#$AtGuardSpot = 1;

			#Get a random X and Y within the set range
			my $RandomX = int(rand($MaxXVariance - 1)) + 1;
			my $RandomY = int(rand($MaxYVariance - 1)) + 1;
			my $PosX = $OrigX + $RandomX;
			my $PosY = $OrigY + $RandomY;
			my $NegX = $OrigX - $RandomX;
			my $NegY = $OrigY - $RandomY;
			my $NewX = quest::ChooseRandom($PosX, $NegX, $OrigX, $OrigX);
			
			if ($NewX == $OrigX) {	# If we are using the orignal X, then chose a random Y to go to
				if ($CurX == $OrigX) {	# If they are moving on the same Axis they are currently on
					my $NewY = quest::ChooseRandom($PosY, $NegY);
					#Check for LoS and Z issues before moving to the new Loc
					my $NewZ = $npc->FindGroundZ($NewX, $NewY, 5) + 1;	#Add 1 to the new Z to prevent hopping issue when they arrive
					if ($NewZ > -999999 && $OrigZ > ($NewZ - 16) && $OrigZ < ($NewZ + 14)) {
						if ($NewY > $OrigY) {	# Checking which direction we are moving in
							# Adjust the LoS Check to check further than how far we are traveling so we stay away from walls
							my $LoS_Check = $npc->CheckLoSToLoc($NewX, $NewY + 2, $NewZ, 5);
							#Check LoS to the new random Loc
							if ($LoS_Check) {
								quest::moveto($NewX, $NewY, $NewZ, -1, 1);
							}
						}
						else {
							# Adjust the LoS Check to check further than how far we are traveling so we stay away from walls
							my $LoS_Check = $npc->CheckLoSToLoc($NewX, $NewY - 2, $NewZ, 5);
							#Check LoS to the new random Loc
							if ($LoS_Check) {
								quest::moveto($NewX, $NewY, $NewZ, -1, 1);
							}
						}
					}
				}
				else {	# If not moving on the same Axis they are already on, just return them to their Spawn Point
					quest::moveto($OrigX, $OrigY, $OrigZ, -1, 1);
				}
			}
			else {	# If we are not using the orignal X, then use the original Y instead
				if ($CurY == $OrigY) {	# If they are moving on the same Axis they are currently on
					#Check for LoS and Z issues before moving to the new Loc
					my $NewZ = $npc->FindGroundZ($NewX, $OrigY, 5) + 1;	#Add 1 to the new Z to prevent hopping issue when they arrive
					if ($NewZ > -999999 && $OrigZ > ($NewZ - 16) && $OrigZ < ($NewZ + 14)) {
						if ($NewX > $OrigX) {	# Checking which direction we are moving in
							# Adjust the LoS Check to check further than how far we are traveling so we stay away from walls
							my $LoS_Check = $npc->CheckLoSToLoc($NewX + 2, $OrigY, $NewZ, 5);
							#Check LoS to the new random Loc
							if ($LoS_Check) {
								quest::moveto($NewX, $OrigY, $NewZ, -1, 1);
							}
						}
						else {
							# Adjust the LoS Check to check further than how far we are traveling so we stay away from walls						
							my $LoS_Check = $npc->CheckLoSToLoc($NewX - 2, $OrigY, $NewZ, 5);
							#Check LoS to the new random Loc
							if ($LoS_Check) {

								quest::moveto($NewX, $OrigY, $NewZ, -1, 1);
							}
						}
					}
				}
				else {	# If not moving on the same Axis they are already on, just return them to their Spawn Point
					quest::moveto($OrigX, $OrigY, $OrigZ, -1, 1);
				}
			}
		}

		#Bool Return option to see the result of if the NPC is at it's new loc or not
		#return $AtGuardSpot;
	}
}

return 1;	#This line is required at the end of every plugin file in order to use it