I am setting the hp to greater than 2.14 billion manually in the npc_types table with navicat. I set it at 4bil just to see if it would go over the cap. The table accepts it which is great. The NPC doesn't.
I used #showstats to look at what the NPC's HP's are.
I then used #damage 1000000000 to be sure what the #showstats was showing was correct. On the show stats its weird, it will show the HP at 2.14bil but it will show the MAX hp as 0, not sure why that is.
When I do #damage 1000000000 it takes the NPC's HP's to 53% telling me that the NPC's HP's isn't even close to the 4bil I set it to.
|