EQEmu Server Pack Installer 1.0 released

[cavedude]

Version 2.1 has been released. It features EQEmu 0.6.3-DR1 and some small changes to the database. The full installer now has the option to not place any config files (in case you already have your own) and if you already have 2.0 installed, you can just grab the much smaller upgrade file to get you current.

Full Installer Pack:
http://eqemu.sesmar.net/sp/EQEmuServerPack-2.1.exe

Upgrade only:
http://eqemu.sesmar.net/sp/EQEmuServ....1-Upgrade.exe

Raw Pack:
http://eqemu.sesmar.net/sp/EQEmuSP-2.1-NoInstaller.rar


Enjoy!


Version 2.0 (0.6.2-DR1) is here:

http://eqemu.sesmar.net/sp/EQEmuServerPack-2.0.rar

The raw version minus Linux support (for now)

http://eqemu.sesmar.net/sp/EQEmuSP-2.0-NoInstaller.rar


Version 1.0 (0.6.0-DR3) can still be had here:

http://eqemu.sesmar.net/sp/EQEmuServerPack-1.0.rar

For those of you who prefer to do everything by yourself, a raw version is available as well. This edition also includes pre-compiled Linux binaries. It can be had here:
http://eqemu.sesmar.net/sp/EQEmuSP-1.0-NoInstaller.zip

If you need any help, have any questions, or suggestions, etc Our forum is found here:
http://eqemu.sesmar.net/forum

We hope you all enjoy our software!
-The Dark Rogue Productions team

[mrea]

Excellent! Should greatly help many people start up, introducing many more people to the server community! Thanks both of you!

[cavedude]

Credit also goes to Solid11 and Sesmar their help was invaluable.

It's our hope that this will help new server operators get their servers up and running quicker so to draw more people into the community. The more people we have helping out, the better EQEmu will become.

[sdabbs65]

Originally Posted by cavedude

Credit also goes to Solid11 and Sesmar their help was invaluable.

It's our hope that this will help new server operators get their servers up and running quicker so to draw more people into the community. The more people we have helping out, the better EQEmu will become.

Great work, I had it up and running in 15mins.

im guessing this runs off the may patch ?
you know people are going to ask what version it's compatable with <G>.

[cavedude]

Yes they already have asked. Unfortunately, it uses the client from last year. We're working hard on 0.6.1 thohgh to get it a bit more modern.

[rojadruid]

Does the installer use your DB Cavedude or the PEQ Database? Just curious before I give it a try.

[sdabbs65]

Originally Posted by cavedude

Yes they already have asked. Unfortunately, it uses the client from last year. We're working hard on 0.6.1 thohgh to get it a bit more modern.

6.1 hmmm...I heard it was still quite messy I would like to upgrade 2 it but I will wait till im sure it's not more of a pain than 6.0. on a sidenote it does have a few good things like guards working and the archery fix...
but I can add those in I suppose anytime i want now that I learned how to complie correctly.
Well Im knee deep in another project so I will check it out next week sometime.

[sdabbs65]

I downloaded your http://eqemu.sesmar.net/EQEmuSP-1.0-NoInstaller.zip

and gave it a test drive and this is what I found.

The fix guild patch ... is it in there ?not able to find it..

command.cpp has one error MAX_Logging or something.
this may be my fault I MODIFIED features.h to enable fear pathing.
but I don't think it affected logging <shrug>.

I treid useing your DB and it works great items are all good.
I used my DB from 0-6.1-dr2 and all the NPC's are nakid.

the guild fix binarys work great.
will post more when I get time to play with it some more.

[kawika]

Originally Posted by sdabbs65

all the NPC's are nakid.

Ah hell, just throw an Adult rating or XXX rating on your server and let all the perverts of the world enjoy themselves for a few minutes!

[sdabbs65]

Originally Posted by kawika

Ah hell, just throw an Adult rating or XXX rating on your server and let all the perverts of the world enjoy themselves for a few minutes!

I thought about that,
but it made all my cross-dressers mad.

[Zisct1]

Ok i have everything set up and when i click world.exe everything is good till' the very bottom of it where it says ..Error: LoginServer::Connect: 'TCPConnection::Connect<>: connect<> failed. Error: 10061? Is there anything i can do i dont know whats wrong with my Loginserver, thanks for everything and anything you can help with.

[SuedeWorthey]

Originally Posted by Zisct1

Ok i have everything set up and when i click world.exe everything is good till' the very bottom of it where it says ..Error: LoginServer::Connect: 'TCPConnection::Connect<>: connect<> failed. Error: 10061? Is there anything i can do i dont know whats wrong with my Loginserver, thanks for everything and anything you can help with.

Are you using Minilogin?

[cohaagen]

ok so i DLed cavedudes file EQEmuServerPack, it all installed fine, got MySQL, everything seems fine. Except I need to know how to login! when i load up my eqgame.exe and try connect It tells me eqhost.txt isnt working properly. Need to kno how/where to login to my server and what username/password i will need(i created some for mysql and all that stuff, just need to know what goes where)

I just installed my EQ Evolution and did NOT Download any patches from live servers, pls tell me if i need to
also, pls give me the ENTIRE stupid text for eqhost.txt for this server im tryin to make
if anyone can help i will give it another shot

[cavedude]

Hey all,

Sorry for my disappearance. A new job, car, condo, and LOTS of business related travel all contributed. I haven't given up on or forgotten the project. In fact I am itching to get back into it full swing. I *should* be off and will be home tomorrow so I'm going to use that time to play catch up and also get myself organized again. Look for good things soon.

[solid11]

WB Cave =P