Blank Server Select Screen

[BoBo12345]

Well i got the server up and running but for some reason it is still not working on my computer the server select screen is still blank... i followed the minilogin i set the account to IP 192.168.2.13 like it says to in the guide so i know its connecting. Not sure where i am going wrong i have tried connecting on my computer as the server and as other computers.
Also something interesting to note is that when my server is sleeping it says 0: sleeping at the top instead of 7005: sleeping.

Searched for almost 2 hours to find a fix and didn't find anything that works.. using MYsql 5.something and the newest version of perl and the 7.40 EQEMU

also it only gets to this step
[DEBUG] [WORLD__LS] Connected to Loginserver: eqemulator.net:5998
but i never have seen this below step come up but i tried pushing enter anyways to see if it would work
[DEBUG] [WORLD__LS] Loginserver provided YOUREXTERNALIP as world address

[LoginServer]
loginserver=192.168.2.13
loginport=5999
worldname=My Minilogin
worldaddress=192.168.2.13
locked=false
account=
password=

[WorldServer]
Defaultstatus=
Unavailzone=

[ChatChannelServer]
worldshortname=
chataddress=
chatport=

[LoginConfig]
ServerMode=Minilogin
ServerPort=5999

[ArChron]

Are you sure you're turning off any Anti-Virus software that checks for incoming connections and identified them as a worm (or something like that). I run a minilogin at home, and have to turn Norton off to be able to connect, even from my own machine.

Other than that, your LoginServer.ini looks alot like mine, except for the IP addr.

What does your eqemu_config.xml look like?

[BoBo12345]

and i don't have any anti virus even installed

<?xml version="1.0">
<server>
<world>
<shortname>Minilogin</shortname>
<longname>My Minilogin</longname>

<!-- Only specify these two if you really think you need to. -->
<!--<address>127.0.0.1</address>-->
<!--<localaddress>127.0.0.1</localaddress>-->

<!-- Loginserver information. -->
<loginserver>
<host>127.0.0.1</host>
<port>5999</port>
<account></account>
<password></password>
</loginserver>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>some long random string</key>

<!-- Enable and set the port for the HTTP service. -->
<http port="9080" enabled="true" mimefile="mime.types" />
</world>

<!-- Database configuration, replaces db.ini. -->
<database>
<host>127.0.0.1</host>
<port>3306</port>
<username>root</username>
<password>awldkjfw</password>
<db>peq</db>
</database>
</server>

[ArChron]

What's in your eqhost.txt file in your EQ client directory? Hopefully something simple, like:

[LoginServer]
Host=192.168.2.13:5999

no? That'll have your EQ client looking to your machine for the available worlds...

Your debug output

"Connected to Loginserver: eqemulator.net:5998"

shows that you aren't looking at your local minilogin, but instead at eqemulator.net

[techguy84]

Where he said eqemulator.net:5998 is where he was quoting the guide. Given your configs, and the fact that you say your not seeing anything past the

[DEBUG] [WORLD__LS] Connected to Loginserver: eqemulator.net:5998
but i never have seen this below step come up but i tried pushing enter anyways to see if it would work
[DEBUG] [WORLD__LS] Loginserver provided YOUREXTERNALIP as world address

it sounds to me like your launcher is not connecting to the world.exe like it should.

As far as not seeing server select, there has been alot of errors regarding that. The best thing I can recomend is to move it over to the public login and see if you can see anything. You should atleast beable to see others servers, and if you see yours, then we eliminate the fact that something is wrong with 90% of the emulator setup and we only need to focus on the minilogin stuff. Kinda like process of elimination.

Try to also change all references in your eqemu config under the login server to your local IP for the computer its running on. Only use 127.0.0.1 for the database connectino and nothing else.

Also, try booting up zone.exe manually to see if its a launcher issue as to why your zones arnt connecting.

P.S. 0:sleeping is what its suppose to say, this is a bad on my part and I am fixing it now, so long as its the first thing I do after this post.

[BoBo12345]

I am having a new error... i realized that i had the server still set on public login instead of the minilogin set up in mysql and now it is saying

****For minilogin to work, you need to set the <address> element in the <world> section... still slightly confused as to why it is saying that