Linux Server Rebuild (3/1/13)

[LordAdakos]

To compile and run a linux server (assuming 32 bit debian/ubuntu) (please let me know if I'm wrong about anything - a lot of this info was ripped from other guides, and X's and Proskeptics scripts)

Are these the proper steps?


1.Update host kernel info

cp /etc/sysctl.conf /etc/sysctl.conf_original
grep -v "kernel.shm" /etc/sysctl.conf | grep -v "TJL" > /etc/new_sysctl.conf
mv /etc/new_sysctl.conf /etc/sysctl.conf
echo "# added by TJL - 2012-02-27 for eqemu" >> /etc/sysctl.conf
echo "kernel.shmmax = 134217728" >> /etc/sysctl.conf
echo "kernel.shmall=65536" >> /etc/sysctl.conf

2.apt-get updates/installs

apt-get clean
apt-get update
pt-get -y install git git-core gcc g++ cpp libmysqlclient-dev libio-stringy-perl
apt-get -y install zlib-bin zlibc unzip make cmake subversion
apt-get -y install libmysqlclient-dev libperl-dev mysql-client-5.1
apt-get -y install mysql-server

3.make dirs start git

mkdir -p /home/eqemu/server/logs
mkdir -p /home/eqemu/source
mkdir -p /home/eqemu/server/Maps
mkdir -p /home/eqemu/server/quests
mkdir -p /home/eqemu/server/plugins
mkdir -p /home/eqemu/server/shared

cd /home/eqemu/source

git clone git://github.com/EQEmu/Server.git
svn co http://projecteqdb.googlecode.com/svn/trunk/peqdatabase
svn co http://projecteqquests.googlecode.com/svn/trunk/quests
svn co http://eqemumaps.googlecode.com/svn/trunk/Maps

4.copying things

cp -r /home/eqemu/source/Maps/* /home/eqemu/server/Maps/
cp -r /home/eqemu/source/quests/* /home/eqemu/server/quests/
chmod --recursive ugo+rwx /home/eqemu/server/quests/
cp -r /home/eqemu/source/quests/plugins/* /home/eqemu/server/plugins/
chmod --recursive ugo+rwx /home/eqemu/server/plugins/
cp /home/eqemu/source/Server/utils/defaults/commands.pl /home/eqemu/server/
cp /home/eqemu/source/Server/utils/defaults/plugin.pl /home/eqemu/server/
cp /home/eqemu/source/Server/utils/defaults/worldui.pl /home/eqemu/server/

5.SQLs

mysql -u root -p*PASSWORD* -e "drop database if exists peqdb; create database if not exists peqdb;"
gunzip peqdb_rev*.sql.gz
mysql -u root -p*PASSWORD* -f -D peqdb < /home/eqemu/source/peqdatabase/peqdb_*.sql
# that might take a little time -- just under two minutes on my machine...
mysql -u root -p*PASSWORD* -f -D peqdb < /home/eqemu/source/peqdatabase/load_player.sql
mysql -u root -p*PASSWORD* -f -D peqdb < /home/eqemu/source/peqdatabase/load_login.sql
mysql -u root -p*PASSWORD* -f -D peqdb < /home/eqemu/source/peqdatabase/load_bots.sql

6.Move things

cd /home/eqemu/server
cp /home/eqemu/source/Server/utils/defaults/eqemu_config.xml.full eqemu_config.xml
cp /home/eqemu/source/Server/utils/defaults/log.ini .
cp /home/eqemu/source/Server/loginserver/login_util/login.ini .
cp /home/eqemu/source/Server/loginserver/login_util/login_opcodes.conf .
cp /home/eqemu/source/Server/loginserver/login_util/login_opcodes_sod.conf .
cp /home/eqemu/source/Server/utils/patches/*.conf .

7.compiling and relocating files

# Fixed that they need the crypt files during the single make, not after. X
# These are the 32bit crypt files - 64 bits commented out inline.
# Switch comments for 64-bit OS. (Different process for GIT-based 
compile - X)
#
cd /home/eqemu/source/Server/dependencies

# 32 bits
wget -c http://projecteqemu.googlecode.com/files/ubuntu_LoginServerCrypto_x86.zip

# 64 bits
# wget -c http://projecteqemu.googlecode.com/files/ubuntu_LoginServerCrypto_x64.zip

rm -rf libEQEmuAuthCrypto.a
rm -rf libcryptopp.a
unzip ubu*.zip
#
# Added CMAKE section, to be able to use make later on. X.
#
echo
echo ' '
echo ' +--------------------------------------------------------------+'
echo ' Now CMAKE: Do not take advanced options, '
echo ' Make sure you have the Loginserver to ON, as well as'
echo ' EQEMU_ENABLE_RVALUE_MOVE to ON'
echo ' If it starts asking for unknown PATHS, something broke. Restart. '
echo ' +--------------------------------------------------------------+'
echo ' '
mkdir /home/eqemu/source/build
cd /home/eqemu/source/build
cmake -G "Unix Makefiles" -i /home/eqemu/source/Server/
make clean &> /home/eqemu/clean_eqemuserver.log
echo ' '
echo ' Compiling source-code -- please wait... '
echo ' '
make &> /home/eqemu/compile_eqemuserver.log
#
# takes 12 minutes (tested with make -j, craps out. Won't suggest it - X)
# check that log file with nano just to see that there were no errors..
# if there were errors, then they'd probably be on the screen too, so only panic
# if you see a problem on-screen
#
# or use tail /home/eqemu/compile_eqemuserver.log
# to see the last lines - if it hits 100%, you're done - X.
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Making links to compiled executables in the server directory.!'
echo '+--------------------------------------------------------------+ '
#read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Fixed the links to take new build process into account - X.
#
ln -s /home/eqemu/source/build/Bin/shared_memory /home/eqemu/server/shared_memory
ln -s /home/eqemu/source/build/Bin/world /home/eqemu/server/world
ln -s /home/eqemu/source/build/Bin/zone /home/eqemu/server/zone
ln -s /home/eqemu/source/build/Bin/loginserver /home/eqemu/server/loginserver
ln -s /home/eqemu/source/build/Bin/eqlaunch /home/eqemu/server/eqlaunch
ln -s /home/eqemu/source/build/Bin/chatserver /home/eqemu/server/chatserver
ln -s /home/eqemu/source/build/Bin/mailserver /home/eqemu/server/mailserver
#
cd /home/eqemu/server

8.write a startup script

# Adapted startup script, EQEmuLoginServer is no longer used, it is now
# just loginserver, as well as some other fixes - X.
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Writing Startup Script... !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
echo 'ulimit -c unlimited ' > /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'cd /home/eqemu/server ' >> /home/eqemu/server/startup.sh
echo 'export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:. ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'rm -rf /home/eqemu/server/logs/*.log ' >> /home/eqemu/server/startup.sh
echo 'chmod --recursive ugo+rwx /home/eqemu/server/quests ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Starting Login Server... ' >> /home/eqemu/server/startup.sh
echo ' ./loginserver 2>&1 >> /home/eqemu/server/logs/login.log & ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Waiting about 5 seconds before starting World Server... ' >> /home/eqemu/server/startup.sh
echo 'sleep 5 ' >> /home/eqemu/server/startup.sh
echo './shared_memory 2>&1 >> /home/eqemu/server/logs/sharedmem.log' >> /home/eqemu/server/startup.sh
echo 'sleep 3 ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo './world 2>&1 > /home/eqemu/server/logs/world.log & ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Waiting 10 seconds before starting the zones via launcher ' >> /home/eqemu/server/startup.sh
echo 'sleep 10 ' >> /home/eqemu/server/startup.sh
echo './eqlaunch zone 2>&1 > /home/eqemu/server/logs/zones.log & ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo The server is mostly ready... give it a couple of minutes '  >> /home/eqemu/server/startup.sh
echo 'echo to load stuff from the databases for the zones and users ' >> /home/eqemu/server/startup.sh
echo 'echo can start logging in. ' >> /home/eqemu/server/startup.sh
chmod ugo+x /home/eqemu/server/startup.sh


echo '+--------------------------------------------------------------+'
echo '! Writing db.ini !'
echo '+--------------------------------------------------------------+'
echo '[Database] ' > /home/eqemu/server/db.ini
echo "host=$EXT_IP " >> /home/eqemu/server/db.ini
echo 'user=eqemu ' >> /home/eqemu/server/db.ini
echo "password=*PASSWORD* " >> /home/eqemu/server/db.ini
echo 'database=peqdb ' >> /home/eqemu/server/db.ini
#

9.priv settings, kill script

chmod -R ugo+rw /home/eqemu

echo "killall eqlaunch world zone loginserver " >> /home/eqemu/server/killeq.sh
chmod -R ugo+x /home/eqemu/server/killeq.sh

10.Config EQEMU_CONFIG.XML

Set Shortname, longname, host, database, etc.

10.is it done?

#ON
echo '! /home/eqemu/server/startup.sh !'
#OFF
echo '! /home/eqemu/server/killeq.sh !'

99.TO DO

I need to test this, see if it works, see if I'm missing anything. I feel like I probably am.
I also need to make this more friendly to read, I threw a lot of script in there
I'd like to turn this into an actual guide at some point to help newbies (like me, admittedly)