I know theres another forum for the EQMac project, however I can't answer their anti-spam question what so ever -_-. I searched and searched and have zero clue what it is. Anyways!
I recently got the newest source, maps, database, etc. Everything works, minus the login. I downloaded OpenSSL (Cmake complained BUILD_Login needed it) and it allowed me to build the project for login. I built it in Visual Studio and it worked fine. However, when I ran the LoginServer.exe it errors out with the following: Application failed to start. Here is a log of the error from Event Viewer. On a side note, I also read that EQMac uses a different login? I have both the "Windows Client" and legit EQMac client.
Code:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program loginserver.exe because of this error.
Program: loginserver.exe
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional Data
Error value: 00000000
Disk type: 0
Code:
Fault bucket 73610642072, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: loginserver.exe
P2: 0.0.0.0
P3: 544bec3b
P4: ntdll.dll
P5: 6.3.9600.17278
P6: 53eeb4a3
P7: c000007b
P8: 00098f05
P9:
P10:
Attached files:
C:\Users\Steven\AppData\Local\Temp\WER334.tmp.WERInternalMetadata.xml
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_loginserver.exe_84e2de527c5dfcce298cb8823442c567e6eaeff4_03e62774_0756071c
Analysis symbol:
Rechecking for solution: 0
Report Id: 7469378d-5d03-11e4-8284-902b34dd34e6
Report Status: 1
Hashed bucket: 3e09894e1a0b28c03456ccab4a98e62c
Hopefully someone can help me out with this information. I can always provide more.
EQMac Login
Threaded Mode
