Catching Mob Crash?

[cavedude]

I haven't been able to re-create that error here using my 0.6.0 binaires and db. But, "Unknown type/pettype of: 0,0. Using Default Formula..." may be at least a partial cause. It looks like whatever pet you are creating isn't in the db. Have you tried creating pets that are found in it? The mob crash could very well be the pet itself, and not a NPC. That could also explain the pain and suffering crap when using a pet.

So, first thing try to create a pet that is in the db.

Also, try out my db included with the installer here: http://eqemulator.net/forums/showthr...4&page=1&pp=15

Maybe it's a bug with PEQ's pets.

[ubatch]

6.0-DR3
PEQ_Velious_RC1
Ummmm...anything else?
Oh yeah, I did get some of the latest tables from the CVS...Maybe its screwing up because I am using those? I don't know...

Also, YES I did try to create a pet that was in there, and umm...It still bugged if as far as I recall.

I went back to 6.0-DR2, and everything else the same as above 'cept the version, and I dont get this error...instead, when pets attack and crap, I get this message...

SPU POS Konarer00: (-127.46, 463.84, -341.07) @189.25
SPU POS Konarer00: (-133.66, 410.49, -339.60) @211.38
SPU POS Konarer00: (-132.55, 405.19, -339.66) @245.50
SPU POS Konarer00: (-131.04, 402.97, -339.68) @251.50
SPU POS Konarer00: (-125.61, 402.80, -339.33) @22.75
SPU POS Konarer00: (-118.49, 436.23, -330.17) @249.63
SPU POS Konarer00: (-116.96, 438.24, -329.56) @218.75
SPU POS Konarer00: (-22.60, 235.69, -304.11) @66.50
SPU POS Konarer00: (-43.73, 261.02, -304.65) @104.25
SPU POS Konarer00: (-64.07, 298.33, -304.74) @106.00
SPU POS Konarer00: (-70.12, 303.47, -304.75) @120.00
SPU POS Konarer00: (-82.36, 307.30, -304.71) @126.50
SPU POS Konarer00: (-144.76, 310.56, -294.74) @66.50
SPU POS Konarer00: (-182.85, 313.46, -292.89) @117.25
SPU POS Konarer00: (-193.43, 313.94, -292.80) @120.63
SPU POS Konarer00: (-211.81, 310.44, -292.76) @171.75
SPU POS Konarer00: (-219.98, 299.76, -292.23) @165.63
SPU POS Konarer00: (-223.31, 296.22, -292.05) @148.38
SPU POS Konarer00: (-229.21, 291.32, -292.40) @141.00
SPU POS Konarer00: (-290.89, 275.85, -290.36) @197.63
SPU POS Konarer00: (-292.32, 273.79, -290.21) @204.13
SPU POS Konarer00: (-292.56, 268.57, -290.02) @230.25
SPU POS Konarer00: (-291.25, 266.36, -289.95) @2.38
SPU POS Konarer00: (-233.31, 241.16, -292.39) @203.50
SPU POS Konarer00: (-229.65, 236.90, -292.54) @196.25
SPU POS Konarer00: (-224.21, 227.72, -292.66) @246.38
SPU POS Konarer00: (-220.14, 224.87, -292.69) @246.38
SPU POS Konarer00: (-218.09, 223.44, -292.71) @246.38
SPU POS Konarer00: (-208.32, 219.60, -293.16) @-16.00
SPU POS Konarer00: (-217.29, 214.45, -292.92) @7.38
SPU POS Konarer00: (-214.88, 213.91, -292.89) @8.63
SPU POS Konarer00: (-209.24, 213.40, -292.83) @8.25
SPU POS Konarer00: (-206.46, 213.62, -292.81) @23.00
SPU POS Konarer00: (-203.86, 214.23, -292.80) @26.50
SPU POS Konarer00: (-197.23, 217.35, -292.77) @249.38
SPU POS Konarer00: (-194.95, 218.01, -292.77) @248.63
SPU POS Konarer00: (-192.38, 218.61, -292.76) @248.63
SPU POS Konarer00: (-188.89, 218.76, -292.51) @1.00
SPU POS Konarer00: (-42.60, 262.78, -248.54) @11.00
SPU POS Konarer00: (-24.68, 269.46, -243.84) @52.75
SPU POS Konarer00: (-21.46, 273.31, -244.22) @59.38
SPU POS Konarer00: (-20.87, 275.55, -244.33) @108.00
SPU POS Konarer00: (-22.91, 280.55, -244.51) @101.63
Zoning to safe coords: karnor (102)
[Status] Zoning 'XXX' to: karnor (102) x=302.000000, y=18.000000, z=6.000000
Dropping client: Process=false, ip=XXX, port=XXX
[Status] Zone Shutdown: hole (39)
Map ./Maps/hole.map not found.
[Status] Weather should change in 7908 seconds
Init: Loading zone lists, zone state or spawn list, player corpses, traps
, timezone data - Done. ZoneID = 39; Time Offset = 0
Successfully loaded Zone Config.

However, with that stuff, there's no problem...So I don't even know if its an error =)

Thanks for the support...I appreciate it. Again, what I am running now works, so Im not gonna mess with it unless you can give me a definate fix.../shrug.

[Sakrateri]

I dont believe that database is compatible with 6.0 , it was made for 6.2

[cavedude]

Well, you are missing a map file (hole.map at least - maybe all) Try downloading them and see if the error still comes up. If it does, try my db, not PEQ's. My pet tables are a bit different than theirs, and hell my db is popped up to PoP. If that still doesn't correct it, then I would just leave it alone. If it works for you with just some spam then don't try to fix it

And while I'm no PEQ expert, I believe you are right. RC1 is meant for 0.6.2, not 0.6.0.

[ubatch]

I was told that too...But, again it works perfect with 6.0-DR2 So...I dunno.

Also, I believe I tried 6.0-DR3 w/ the beta database....soooo.....I have no idea what the deal is.

I'll just let it be as is, until something drastic happens and I have to change it.

Anything major different on your DB cavedude? That is, I pretty much would like it like PEQ...pet tables wouldnt bother me if its nothing really noticable...and, the PoP spawned is a plus.

Let me know.

[ubatch]

Edit, "what the deal WAS". =P

[tallerin]

I believe i read on PEQ that velious RC1 was backward compatible and could be used with the 6.0-6.2 eqemu. now the velious beta is only compitible with 6.0 not 6.2 unless you alter a few tables in the DB.

Also i have used cavedudes DB and i liked it quite abit when i used it, its worth a look at.