cyclops heads

Willaena · #1 03-05-2007, 02:27 PM

On PEQ this weekend I saw a hill giant with a cyclops head.

This is running titanium. I have not fired up the 6.2-compatible client to check the textures.

Willaena (Lynet on PEQ)

Angelox · #2 03-05-2007, 02:34 PM

I haven't checked yet, but I'm betting Titanium clients only pose the cyclops heads on all textures, in any zone. I wished I saved my old 6.2 client for comparing, might have a back up somewhere.

Angelox · #3 03-21-2007, 09:01 PM

I've been fooling around with older clients and this definitely is a "Titanium" client problem. Older 6x clients do not show these glitches.
I'll move this thread over to the bug-report areas, so the Devs might-can see it.
Edit;
As far as I've seen, this includes misplaced heads on giant models (Permafrost Ice Giant for one), and "twisted" heads on some npc's (Qeynos guards, erudite vendors, etc.)

**cavedude** · #4 03-21-2007, 11:25 PM

I agree the misplaced heads seem to be a client only issue, however the twisted heads are indeed a helmtexture issue. When PEQ first sourced in POK it was loaded with twisted heads, visible using both 0.6.2 and Titanium. This was being caused by mobs with a helmtexture of 31 (why they were I have no idea, they were collected that way) I changed it to 0 or 1 and their heads appeared correctly on both clients. Now there of course may be other cases of twisted heads, but this method has corrected all I have seen on PEQ thus far.

So_1337 · #5 03-22-2007, 12:00 AM

Thanks, that's at least a place to start. I have some time here at work today, I'll play around with some of the ones I know for sure (Sand Giants with cyclops heads, old-model ogres in Oggok with twisted heads).

I'll post if that's indeed a fix.

So_1337 · #6 03-22-2007, 02:44 AM

No dice. No matter what body or helmtexture type you set the NPC to, the cyclops head stays in place.

Where are the helm textures stored? If it's in a file, is there a chance that Titanium just has a bad batch of them?

I'm completely new to all of this, so please forgive me if that's an ignorant question. Being a client-side problem, though, it seems like the fix would be somewhere with the client.

EDIT: What I mean is, Angelox confirmed that the textures are in the S3D file, but is it possible they could've been corrupted somehow? I've checked the helmtextures on both cyclops-headed giants and on twisted-headed ogres, and all the helm textures are as they should be.

**cavedude** · #7 03-22-2007, 02:53 AM

I said the twisted heads, not the misplaced ones. We all agree that is a client issue, and it would have to be corrected in the Emu code though I seriously doubt it's a high priority.

narcberry · #8 03-22-2007, 07:45 AM

mispost, forgive the noob.

**cavedude** · #9 03-22-2007, 08:48 AM

Then we have two twisted head issues... I saw them in POK with the 0.6.2 client. Changing the helmtexture did correct them for both clients in my case. In fact, the SoW bot I placed had a twisted head at first since I just copied him from another NPC in the zone. I changed the helmtexture and if you log and and see now it is no longer twisted.

So_1337 · #10 03-23-2007, 02:19 AM

Switching to the 6x client did indeed fix both the cyclops heads and the twisted heads. It's very possible that there's one twisted head issue to do with helmtextures and one to do with just the Titanium client, as you said.