Problem, Please help!

[BoBo12345]

Well i got the server up and running but for some reason it is still not working on my computer the server select screen is still blank... i followed the minilogin i set the account to IP 192.168.2.13 like it says to in the guide so i know its connecting. Not sure where i am going wrong i have tried connecting on my computer as the server and as other computers.
Also something interesting to note is that when my server is sleeping it says 0: sleeping at the top instead of 7005: sleeping.

also it only gets to this step
[DEBUG] [WORLD__LS] Connected to Loginserver: eqemulator.net:5998
but i never have seen this below step come up but i tried pushing enter anyways to see if it would work
[DEBUG] [WORLD__LS] Loginserver provided YOUREXTERNALIP as world address

[LoginServer]
loginserver=192.168.2.13
loginport=5999
worldname=My Minilogin
worldaddress=192.168.2.13
locked=false
account=
password=

[WorldServer]
Defaultstatus=
Unavailzone=

[ChatChannelServer]
worldshortname=
chataddress=
chatport=

[LoginConfig]
ServerMode=Minilogin
ServerPort=5999

[ArChron]

Bobo... the IP address has to be your IP address... sometimes people take tutorials too literally.

My IP is 192168.1.100, not 192.168.2.13. Other than that, I too followed the instructions nearly to the letter, and was up and running in no time...

If you aren't sure, do a Start Menu -> Run -> cmd to get a good 'ol DOS window.

Type in ipconfig and press enter. You should see sumfink that tells you your IP address. That's what you enter, not the IP addy from the tutorial.

If you've done this, and the IP reported matches what you have in your LoginServer.ini, then we'll need to see your eqemu_config.xml as well, and the eqhost.txt from your client directory. These all have to be looking at the same IP address for the client -> server conversation to happen.

[BoBo12345]

198.168.2.13 IS my IP address... i did it with ipconfig....
also refer to the thread i started...