Help starting up server correctly.

[AndMetal]

Originally Posted by Zhaar

<!-- Only specify these two if you really think you need to. -->
<address>192.168.0.3</address>
<localaddress>127.0.0.1</localaddress>

address corresponds to your public IP address (what the Internet sees) and localaddress is what your LAN sees.

Change the IP in the <address></address> field to your public IP address or domain name (if you have a domain name for your IP address). If you're not sure what your IP address is, go to this website to find out.

Then, change <localaddress></localaddress> to whatever the LAN IP address of the server is, which based on the above information, looks to be 192.168.0.3.

Post back if you still have problems.

[Zhaar]

I got the server to work by leaving those fields blank.

<!-- Only specify these two if you really think you need to. -->
<address></address>
<localaddress></localaddress>