Go Back   EQEmulator Home > EQEmulator Forums > Misc > Misc::Off Topic

Misc::Off Topic Want to talk about something that has nothing to do with EverQuest or the emulator? Post here.

Reply
 
Thread Tools Display Modes
  #1  
Old 02-09-2009, 04:32 PM
Yeormom
Discordant
 
Join Date: Apr 2004
Location: 127.0.0.1
Posts: 402
Default

Quote:
Originally Posted by Congdar View Post
but you might want to keep them at 2.4ghz and upgrade your router instead from B,G to N which I believe uses 5.8ghz.
Incorrect. B/G/N all use the 2.4GHz spectrum. The only wireless network standard which has gone mainstream that uses 5.8ghz is 802.11a, which supports decent speeds but short distance.
__________________
Yeorwned
Bane of Life [Custom Classic/PvP]
Reply With Quote
  #2  
Old 02-09-2009, 07:19 PM
Congdar
Developer
 
Join Date: Jul 2007
Location: my own little world
Posts: 751
Default

maybe not 5.8ghz as I mentioned but 5ghz... from wikipedia:

Quote:
Deployment Strategies
To achieve maximum throughput a pure 802.11n 5 GHz network is recommended. The 5 GHz band has substantial capacity due to many non-overlapping radio channels and less radio interference as compared to the 2.4 GHz band.[3] An 802.11n-only network may be impractical for many users because the existing computer stock is predominantly 802.11b/g only. Replacement of incompatible WiFi cards or of entire laptop stock is necessary for older computers to operate on the network. Consequently, it may be more practical in the short term to operate a mixed 802.11b/g/n network until 802.11n hardware becomes more prevalent. In a mixed-mode system, it’s generally best to use a dual-radio access point and place the 802.11b/g traffic on the 2.4 GHz radio and the 802.11n traffic on the 5 GHz radio.[4]
Reply With Quote
  #3  
Old 02-25-2009, 12:05 PM
bristle
Sarnak
 
Join Date: Jan 2009
Location: san jose, ca
Posts: 44
Default

i have 5.8 GHz phone and 2.4 GHz network. i use a dynamic dns and have no problems even though i have several computers up.
Reply With Quote
  #4  
Old 02-25-2009, 12:53 PM
Yeormom
Discordant
 
Join Date: Apr 2004
Location: 127.0.0.1
Posts: 402
Default

Quote:
Originally Posted by Congdar View Post
maybe not 5.8ghz as I mentioned but 5ghz... from wikipedia:
802.11n is nothing more than bonding on a previous standard. Almost every access point/router implementation of 802.11n is using the 2.4GHz spectrum because it's backward compatible with b/g and thus cheaper to make. You get much better throughput if you run 802.11n on the 5GHz spectrum but the range is significantly more limited. I've only see a couple of AP's that support the 5GHz range which we're quite expensive.

You can verify this statement by reading up on the 802.11n specification document or better yet, check out the summary provided by Cisco.
__________________
Yeorwned
Bane of Life [Custom Classic/PvP]
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 06:21 AM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3