Help!!

Vaile5546 · #1 03-25-2009, 10:05 PM

Ive tried putting the screen refresh rate in my eqclient.ini file to 60 and also Ive tried no luclin models and different resolutions still nothing. Ive reinstalled the game, still nothing. It did this after I tried to install an older hard drive into the comp and then I put the other one back in that was in there and EQ stopped working. She has a 1GB RAM 256MB Vid Card with a 1.8GHz processor. It was playing EQ just fine no problems, no lockups, and no lag. I created the text document starteq.bat but do I have to open it with everquest.exe or what?

**trevius** · #2 03-25-2009, 10:20 PM

Yeah, Andrew80k is right. There is no start.bat for playing EQEmu. That is only for running your own server. I meant to mention that in my original post in this thread, but I forgot to.

Make sure you are following the playguide here:

http://www.eqemulator.net/wiki/wikka...akka=PlayGuide

There is nothing about start.bat in there. The start.bat is only used in the server setup guide and you don't need to do that at all just to play EQEmu.

Vaile5546 · #3 03-25-2009, 10:37 PM

The reason I mentioned starteq.bat is because I found a set up to connect to the servers using a program compiled someone called starteq.bat

**trevius** · #4 03-26-2009, 12:52 AM

Just follow the playguide I linked. It is pretty straight forward and has good details.