Need Help - No Expansions Found

[jkennedy]

download navicat to controll all aspects of your server very good program and the expansions when i use sof it tells me 0 of 0 also but works fine

[jumblebum]

Okay, so it still shows "You own 0 of 0 expansion" at the server select screen. My server IS listed. When I attempt to connect to my server I get the following error:
Error 1017: Cannot login to the EverQuest server. You may need to re-run the Update Patch. Repeatedly seeing this message indicates a lost of connectivity to the Patch Server. This is usually temporary.

I assume my client is fine because when I change my eqhost file back to host=eqemulator.net:5998...everything works fine. I just can't connect my server.

Any suggestions?????

[Jexl]

I am also experiencing this problem.

[trevius]

Showing 0 out of 0 expansions owned is just a bug with SoF, but it doesn't actually cause any problems. That just means that our LS code doesn't understand expansions owned properly, but it will still work fine as long as everything else is setup correctly. Just like how Titanium shows something like 25 out of 25 expansions owned, even though there are no where near 25 total expansions even on Live :P

Most likely, your issue is with your private LS or server config. Even though the server shows up on the list, it might not be configured properly to send you to the correct IP for the server. I had a similar issue when I first set my test server up for minilogin. I believe I was able to resolve it by adjusting my server config file to point at the correct IP. Maybe if you post your config file (make sure to remove password info from it), someone can point you in the right direction.

[jumblebum]

Hmmm...I am using Titanium and getting the 0 of 0 expansions. I can't get past this "Error 1017: Cannot login to the EverQuest server. You may need to re-run the Update Patch. Repeatedly seeing this message indicates a loss of connectivity to the Patch Server. This is usually temporary."

I am using the eqemuloginserver.exe which works playing on the same computer as the server, but it doesn't work across the LAN. On the client computer the eqhost file is configured: Host=10.117.40.21:5998. Both firewalls are turned off.

Here are my server configurations:

eqemu_config
<?xml version="1.0">
<server>
<world>
<shortname>Underworld</shortname>
<longname>Underworld</longname>

<!-- Only specify these two if you really think you need to. -->
<address>127.0.0.1</address>
<localaddress>127.0.0.1</localaddress>

<!-- Loginserver information. -->
<loginserver>
<host>10.117.40.21</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>sharedkey</key>

<!-- Enable and set the port for the HTTP service. -->
<http port="9080" enabled="true" mimefile="mime.types" />
</world>

<!-- Database configuration, replaces db.ini. -->
<database>
<host>127.0.0.1</host>
<port>3306</port>
<username>root</username>
<password>xxxxxxxxxx</password>
<db>PEQ</db>
</database>
</server>

eqemulogin
Port=5998
DumpPacketsIn=true
DumpPacketsOut=true
Trace=true
DatabaseServerName=127.0.0.1
DatabaseCatalogName=PEQLoginDB
DatabaseUserName=root
DatabaseUserPassword=xxxxxxxxxx
OPCodePathAndFileName=login_opcodes.conf
AllowUnregistered=true

Any help is appreciated.

[pfyon]

Originally Posted by jumblebum

<!-- Only specify these two if you really think you need to. -->
<address>127.0.0.1</address>
<localaddress>127.0.0.1</localaddress>

Pretty sure address should be your external IP or hostname and localaddress your LAN IP.

[pepsiphreak79]

I am getting 0 of 0 expansions as well and it doesnt appear to be a bug

ive set my variable to

Expansions


All Expansions combined = 16383

But when i try to access drakken char or any other content it sais i dont own expansion