really really easy..
Target NPC;
- you need to add a movement grid to hold the waypoints for the npc to follow: #grid add 1000 2 2
- now you need waypoints (the points the npc travel between).. this can be tricky on hills, be careful: #wp add 1000 10 1 (adds a step of movent to grid #1000 with a pause of 10 and it's #1.)
move forward a little the type #wp add 1000 10 2 forward a little #wp add 1000 10 3 forward a little and so on...all the way up to a maximum of #wp add 1000 10 50.
once you're satisfied with the npc's path, assign the grid you just made to the npc. Do this by targeting the npc and typing #gassign [grid_num] which, in this case would display as: #gassign 1000
type #depopzone to deop the zone, then type #repop.
after a second, you're npc should be walking a random wandering path. hope this helps a little bit.
|
Hybrid Mode
