Error 1017 with new DB9?

[Skifreak107]

Im getting a error 1017 with new db9 using 0.3.0 on minilogin, it was working with drawde's db before, but not anymore? Anyone know why?
-Ski

[BigAL]

I get the same error when using DB9. I switch back to Drawde's and it works fine. Anyone have any ideas?

[Shawn319]

paste your loginserver.ini and boot5zones.bat file here.






/me also just got 600 posts

[Skifreak107]

Will do, GRATS ON 600!

[LoginServer]
loginserver=127.0.0.1
worldname=Test Server
locked=false
account=
password=
worldaddress=127.0.0.1
loginport=5999

@echo off
start zonent . 127.0.0.1 7800 127.0.0.1
start zonent . 127.0.0.1 7801 127.0.0.1
start zonent . 127.0.0.1 7802 127.0.0.1
start zonent . 127.0.0.1 7803 127.0.0.1
start zonent . 127.0.0.1 7804 127.0.0.1
exit
cls


-Ski

[Shawn319]

try changing all the 127.0.0.1's to say localhost

[Skifreak107]

No luck with the localhosts.
-Ski

[BigAL]

@echo off
start zoneNT . localhost 7995 localhost
start zoneNT . localhost 7996 localhost
start zoneNT . localhost 7997 localhost
start zoneNT . localhost 7998 localhost
start zoneNT . localhost 7999 localhost
exit
cls

[LoginServer]
loginserver=localhost
worldname=alaviolette
locked=false
account=
password=
worldaddress=
loginport=5999

I turned off my zonealarm firewall to see if that would help, but no luck. How can a database affect connection? Is it possible?

[Shawn319]

You forgot worldaddress=localhost

[Kyouchou]

I'm getting the same problem when I try to use minilogin.exe (which I finally got working!!! woohoo!!! *dances a jig*)... haven't tried using a different DB yet, cause I forgot what had been said here about the error... will try that next and see what happens...


BTW, my LoginServer.ini and Boot5Zones.Win9x.bat firles are listed (again) below:



LoginServer.ini

### --- This file tells world.exe what loginserver to connect to.
### --- do not add an account and password unless a EQEmu Dev member has created an account for you.
### --- adding an account and password only grants the server a green name and is not needed.

# READ README.TXT

[LoginServer]
loginserver=localhost
worldname=Agarwaendor
locked=false
account=
password=
worldaddress=localhost
loginport=5999




Boot5Zones.Win9x.bat

REM: ****Read this first!!!****

REM: This file requires your real IP in the place of 127.0.0.1 when you are connecting
REM: To a EQEmu Loginserver.

REM: When you are using minilogin, leave all IP entrys as 127.0.0.1 and if you still getting
REM: Errors try using localhost as the IP instead of 127.0.0.1

REM: zone9x.exe is for use with Windows 98 and ME only.
REM: If you are running Windows NT/2000 or XP use ZoneNT.exe

REM:--------------Start-----------------------


@echo off
start zone9x . localhost 7995 localhost
start zone9x . localhost 7996 localhost
start zone9x . localhost 7997 localhost
start zone9x . localhost 7998 localhost
start zone9x . localhost 7999 localhost
exit
cls


REM:---------------END------------------------


*****I had to change the IP entries in the batch file to "localhost" to get minilogin to work (which is wierd cause I tried that one other time and it didn't work... I only tried again cause I was desperate).

Kyouchou

[Kyouchou]

One more thing...

After exiting the EQ interface after I got this error twice, I noticed the following in my World.exe log window...


881330 New client from ip: 127.0.0.1 port:1314
u='eqemu', p='eqemu'
127.0.0.1: Wrong name/pass: name='eqemu'
Removing client from ip:127.0.0.1 port:1314
882540 New client from ip: 127.0.0.1 port:1314
u='eqemu', p='eqemu'
127.0.0.1: Wrong name/pass: name='eqemu'
Removing client from ip:127.0.0.1 port:1314
883040 New client from ip: 127.0.0.1 port:1314
u='eqemu', p='eqemu'
127.0.0.1: Wrong name/pass: name='eqemu'
Removing client from ip:127.0.0.1 port:1314
883590 New client from ip: 127.0.0.1 port:1314
u='eqemu', p='eqemu'
127.0.0.1: Wrong name/pass: name='eqemu'
Removing client from ip:127.0.0.1 port:1314
884250 New client from ip: 127.0.0.1 port:1314
u='eqemu', p='eqemu'
127.0.0.1: Wrong name/pass: name='eqemu'
Removing client from ip:127.0.0.1 port:1314
885620 New client from ip: 127.0.0.1 port:1314
u='eqemu', p='eqemu'
127.0.0.1: Wrong name/pass: name='eqemu'
Removing client from ip:127.0.0.1 port:1314




Is this a separate problem, or is this related somehow to the erro 1017?

Kyouchou

[Shawn319]

You probably dont have thew eqemu account in your DB.

[Kyouchou]

Yeah I thought of that about an hour or so after I posted that message...

I haven't tried yet, but I'm quite confident that if I use the adduser command in World.exe that I'll be able to fix those authentication errors. At this point though, with the new error I picked up with the default database for 0.3.1 I think it may be a mute point for a little while. To be honest though I've put in about 24 hours of total time trying to get this damn thing to work right and I need a break, so I may not mess with it at all this next week.

Kyouchou

[Bobislost]

How do you add a user to the DB ? i'm getting the exact same error.

[Catranis]

Bobislost, I had the same problem and all you have to do is go into EQEmu Admin tool and add an account with id 1, name eqemu, and password eqemu

[Bobislost]

Thanks much! I'll try this.