Go Back   EQEmulator Home > EQEmulator Forums > Development > Development::Server Code Submissions

Reply
 
Thread Tools Display Modes
  #1  
Old 08-29-2008, 04:40 PM
AndMetal
Developer
 
Join Date: Mar 2007
Location: Ohio
Posts: 648
Default Spell Blocking (now with Intra-Zone restrictions!)

Apparently in my original post, I just put %i instead of %.3f for the coordinates, so they weren't being executed correctly in the query. Here is the final code:

In zone/zonedb.h, after
Code:
   47 struct PetRecord {
   48 	uint32 npc_type;
   49 	bool temporary;
   50 };
add
Code:
// Spell Blocking by AndMetal
struct SpellBlocking_Struct{
	sint32	id;			// -1 = database error, 0 = no matches in the database, 1+ = id in the blocked_spells table
	int8	type;		// 0 = not blocked, 1 = zone wide, 2 = specific coords in the zone
	char*	message;	// Message to send to the client saying the message failed, for customizability
};
and a little farther down, after
Code:
  277 	/*
  278 	 * Misc stuff.
  279 	 * PLEASE DO NOT ADD TO THIS COLLECTION OF CRAP UNLESS YOUR METHOD
  280 	 * REALLY HAS NO BETTER SECTION
  281 	 */
  282 	bool    logevents(const char* accountname,int32 accountid,int8 status,const char* charname,const char* target, const char* descriptiontype, const char* description,int event_nid);
  283 	void	GetEventLogs(const char* name,char* target,int32 account_id=0,int8 eventid=0,char* detail=0,char* timestamp=0, CharacterEventLog_Struct* cel=0);
add
Code:
	// Spell Blocking by AndMetal
	SpellBlocking_Struct	GetSpellBlock(int16 spell_id, uint16 zone_id, float x, float y, float z);
In zone/zonedb.cpp, after
Code:
 1268 /*
 1269  solar: this is never actually called, client_process starts an async query
 1270  instead and uses GetAccountInfoForLogin_result to process it..
 1271  */
 1272 bool ZoneDatabase::GetAccountInfoForLogin(int32 account_id, sint16* admin, char* account_name, int32* lsaccountid, int8* gmspeed, bool* revoked,bool* gmhideme) {
 1273 	char errbuf[MYSQL_ERRMSG_SIZE];
 1274     char *query = 0;
 1275     MYSQL_RES *result;
 1276 
 1277 	if (RunQuery(query, MakeAnyLenString(&query, "SELECT status, name, lsaccount_id, gmspeed, revoked, hideme FROM account WHERE id=%i", account_id), errbuf, &result)) {
 1278 		safe_delete_array(query);
 1279 		bool ret = GetAccountInfoForLogin_result(result, admin, account_name, lsaccountid, gmspeed, revoked,gmhideme);
 1280 		mysql_free_result(result);
 1281 		return ret;
 1282 	}
 1283 	else
 1284 	{
 1285 		cerr << "Error in GetAccountInfoForLogin query '" << query << "' " << errbuf << endl;
 1286 		safe_delete_array(query);
 1287 		return false;
 1288 	}
 1289 
 1290 	return false;
 1291 }
add
Code:
/* Spell Blocking by AndMetal
To Do: load blocked_spells table into shared memory, should keep the database from exploding, but as-is allows for changes to take effect immediately
*/
SpellBlocking_Struct ZoneDatabase::GetSpellBlock(int16 spell_id, uint16 zone_id, float x, float y, float z) {
	// Database stuff
	char errbuf[MYSQL_ERRMSG_SIZE];
    char *query = 0;
    MYSQL_RES *result;
    MYSQL_ROW row;

	SpellBlocking_Struct blocked;
	blocked.id = 0;

	if(RunQuery(query, MakeAnyLenString(&query, "SELECT bs.id, bs.type, bs.message FROM blocked_spells bs "
		"WHERE bs.zoneid = %i "
		"AND bs.spellid = %i "
		// Create a virtual box of spell blockage, but still include NULLs
		"AND ((%.3f BETWEEN (bs.x - bs.x_diff) AND (bs.x + bs.x_diff)) OR (x IS NULL) OR (x_diff IS NULL)) " 
		"AND ((%.3f BETWEEN (bs.y - bs.y_diff) AND (bs.y + bs.y_diff)) OR (y IS NULL) OR (y_diff IS NULL))"
		"AND ((%.3f BETWEEN (bs.z - bs.z_diff) AND (bs.z + bs.z_diff)) OR (z IS NULL) OR (z_diff IS NULL))"
		// Type 2s first, in case there is a message to show for that specific spot in the zone
		"ORDER BY bs.type DESC, bs.id ASC LIMIT 1", zone_id, spell_id, x, y, z), errbuf, &result)) {
		safe_delete_array(query);
		if(mysql_num_rows(result) != 0) { // Did we get anything from the query?
			row = mysql_fetch_row(result);
			blocked.id = atoi(row[0]);
			blocked.type = atoi(row[1]);
			blocked.message = row[2];
			mysql_free_result(result);
		}
		else
			mysql_free_result(result);
	}
	else {
		blocked.id = -1;
		cerr << "Error in GetSpellBlock query '" << query << "' " << errbuf << endl;
		safe_delete_array(query);
	}
	return blocked;
}
Lastly, in zone/spells.cpp, after
Code:
 1254 	// angelox start
 1255 
 1256 	if(IsEffectInSpell(spell_id, SE_Levitate) && !zone->CanLevitate()){
 1257 			if(IsClient()){
 1258 				if(!CastToClient()->GetGM()){
 1259 					Message(13, "You can't levitate in this zone.");
 1260 					return false;
 1261 				}
 1262 			}
 1263 		}
add
Code:
	// Spell Blocking by AndMetal
	if(IsClient() && !CastToClient()->GetGM()) { // First the easy stuff, should pass over this if they're a regular mob
		SpellBlocking_Struct blocked = database.GetSpellBlock(spell_id, GetZoneID(), GetX(), GetY(), GetZ());
		if(blocked.id > 0) {
			if(blocked.message != NULL) 
				Message(13, blocked.message); // Output message from the DB
			else if(blocked.type == 2)
				Message(13, "You can't cast this spell here. Try somewhere else."); // Default client message, hinting that it's just that part of the zone
			else if(blocked.type == 1)
				Message(13, "You can't cast this spell here."); //Default client message
			return false; // Prevents the spell from casting
		}
	}
New table, blocked_spells
Code:
CREATE TABLE `blocked_spells` (
  `id` int(11) NOT NULL auto_increment,
  `spellid` mediumint(8) unsigned NOT NULL default '0',
  `type` tinyint(4) NOT NULL default '0',
  `zoneid` int(4) NOT NULL default '0',
  `x` float default NULL,
  `y` float default NULL,
  `z` float default NULL,
  `x_diff` float default NULL,
  `y_diff` float default NULL,
  `z_diff` float default NULL,
  `message` varchar(255) default NULL,
  `description` varchar(255) default NULL,
  PRIMARY KEY  (`id`)
) ENGINE=MyISAM;
and a few starting values
Code:
INSERT INTO blocked_spells (spellid, type, zoneid, message, description) VALUES (1771, 1, 71, 'A voice whispers in your mind: "There are no heroes here..."', 'Prevent CoH in airplane');
INSERT INTO blocked_spells (spellid, type, zoneid, x, y, z, x_diff, y_diff, z_diff, message, description) VALUES (1771, 2, 162, 657, -325, 418.6, 44.6, 44.6, 15, 'A voice whispers in your mind: "There are no heroes here..." Try somewhere else.', 'Prevent CoH in ssratemple before Emperor\'s Room');
This time I did test out the intra-zone portion (in this case, in ssratemple), and it does prevent the casting & gives the correct messages.

Long term, it would probably be better to load the blocked_spells table into shared memory, otherwise a query is run against the database every single time a client casts a spell and doesn't have a GM flag. In addition, it might be worth exploring adding this check both at the end of the spell being cast, as well as at the beginning. Otherwise, I hope others fine this method more useful than the hard-coded blocks currently in the source.
__________________
GM-Impossible of 'A work in progress'
A non-legit PEQ DB server
How to create your own non-legit server

My Contributions to the Wiki
Reply With Quote
  #2  
Old 08-29-2008, 05:52 PM
trevius's Avatar
trevius
Developer
 
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default

Nice! I will have to do some testing on that
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote
  #3  
Old 08-30-2008, 02:09 PM
cavedude's Avatar
cavedude
The PEQ Dude
 
Join Date: Apr 2003
Location: -
Posts: 1,988
Default

I have this on TGC and it works great! A small change to the query though, CoH could still be used within Emp's throne room, this corrects that (obviously, you'd use these inserts instead of the ones above):

Code:
INSERT INTO blocked_spells (spellid, type, zoneid, message, description) VALUES (1771, 1, 71, 'A voice whispers in your mind: "There are no heroes here..."', 'Prevent CoH in airplane');
INSERT INTO blocked_spells (spellid, type, zoneid, x, y, z, x_diff, y_diff, z_diff, message, description) VALUES (1771, 2, 162, 818, -325, 418.6, 208, 143, 15, 'A voice whispers in your mind: "There are no heroes here..." Try somewhere else.', 'Prevent CoH in ssratemple before Emperor\'s Room');
PEQ will add more entries as they are needed as well
Reply With Quote
  #4  
Old 09-01-2008, 01:50 AM
KLS
Administrator
 
Join Date: Sep 2006
Posts: 1,348
Default

When this goes in it will be loaded into zone memory, and cleared on shutdown, like doors.

Also I changed a lot of the NULL capable fields because it kinda made loading into memory more complicated than it needed to be. If someone really wants to have it disregard the entire axis they can set the axis point to 0 and axis diff to 1000000.
Reply With Quote
  #5  
Old 09-01-2008, 03:45 AM
trevius's Avatar
trevius
Developer
 
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default

So far, this looks really good. I was wondering if there was a way to block ALL spells with a single entry using this. Maybe something like %% or *.* could go in the field to set it for ALL spells? Basically to make an area silence effect. I already have a project for a fun idea that could really use that hehe. I was planning to make a long lasting silence debuff spell to do it, but it would be much better if it could just be done with this new feature

Any ideas?
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote
  #6  
Old 09-01-2008, 04:16 AM
KLS
Administrator
 
Join Date: Sep 2006
Posts: 1,348
Default

it could probably be modified to do so, if spellid == 0 or something. Probably wouldn't be too hard to modify what I'm going to put in to do that.
Reply With Quote
  #7  
Old 03-19-2010, 08:18 PM
ChaosSlayerZ's Avatar
ChaosSlayerZ
Demi-God
 
Join Date: Mar 2009
Location: Umm
Posts: 1,492
Default

would it be possible to rather block specific spell from being casted in specific zone, to make that a specific spell can ONLY be casted in specific zone ? (rather having to block it in 300+ zones)?
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 10:20 PM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3