I Finally Found this awhile back for anyone else have problems with this.
it's Archived on these forms this should be made into a sticky for "Support::Windows Servers." it works great.
just make sure you follow step by step
http://www.eqemulator.org/forums/showthread.php?t=7833
I Shorten it alittle & hopefully made it a tad easyer for people.
INSTALLING AS A SERVICES:
1.) You will need INSTSRV.EXE and SRVANY.EXE. You can get them here.
http://www.microsoft.com/en-us/downl....aspx?id=17657
2.) Now lets open Windows Dos Prompt. Goto Start > Run > CMD
3.) Your going to need to Paste the following Pasting & Copying little Different in Dos. Once you have it copied
from Post goto the Black window (Dos Prompt), Right click > Paste & Now you can just Press Enter. Do this for Each
one below if you want to beable to have 5 different Zones in game open at once.
Whats in Red is what the Windows Service Name will be called you can Rename them just make sure you rename them
inside your Registry Inserts also.
Code:
"%programfiles% (x86)\Windows Resource Kits\Tools\instsrv.exe" "PEQTGC World Server"
"%programfiles% (x86)\Windows Resource Kits\Tools\srvany.exe"
Code:
"%programfiles% (x86)\Windows Resource Kits\Tools\instsrv.exe" "PEQTGC Zone_1 Server"
"%programfiles% (x86)\Windows Resource Kits\Tools\srvany.exe"
Code:
"%programfiles% (x86)\Windows Resource Kits\Tools\instsrv.exe" "PEQTGC Zone_2 Server"
"%programfiles% (x86)\Windows Resource Kits\Tools\srvany.exe"
Code:
"%programfiles% (x86)\Windows Resource Kits\Tools\instsrv.exe" "PEQTGC Zone_3 Server"
"%programfiles% (x86)\Windows Resource Kits\Tools\srvany.exe"
Code:
"%programfiles% (x86)\Windows Resource Kits\Tools\instsrv.exe" "PEQTGC Zone_4 Server"
"%programfiles% (x86)\Windows Resource Kits\Tools\srvany.exe"
Code:
"%programfiles% (x86)\Windows Resource Kits\Tools\instsrv.exe" "PEQTGC Zone_5 Server"
"%programfiles% (x86)\Windows Resource Kits\Tools\srvany.exe"
If you do not have 64bit Operating System make sure you remove " (x86)" Above. So it should look like ""%programfiles%\Windows Resource Kits\.......etc"
EDITING AND CREATING THE PARAMETERS OF THE SERVICES:
4.) When you are done with "installing your Services", open your favortie Text Editor.
Paste This into your Text editor, Make sure whats in ORANGE is Correct Location for Server Make sure to use Double
"\\"
Then double Click it to insert into Registry. Whats in Yellow Below MUST match Above Service Names in RED.
Save AS "World.reg"
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\PEQTGC World Server\Parameters]
"Application"="C:\\EQEmu\\world.exe"
"AppDirectory"="C:\\EQEmu\\"
Paste This into your Text editor, Make sure whats in ORANGE is Correct Location for Server Make sure to use Double
"\\"
Then double Click it to insert into Registry. Whats in Yellow Below MUST match Above Service Names in RED.
--- HOW TO FIND YOUR LOCAL, EXTERNAL IPs ---
Below in RED "YOUR External IP Address" you can goto http://www.whatismyip.com/ to find this out.
Below in RED "YOUR Local IP Address"
Goto Start > Run CMD
Now Type in "ipconfig" into Dos Prompt.
Look for "Local Area Connection" Section, Inside there you will see IPv4 or IPv6 at the end of .......: is your
Local IP Usally starts like "192.168.1" or "192.168.0" or "10.0.0".
---
Save AS "zones.reg"
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\PEQTGC Zone_1 Server\Parameters]
"Application"="C:\\EQEmu\\zone.exe . EXTERNAL_IP_ADDRESS YOUR External IP
Address INTERNAL_IP_ADDRESS YOUR Local IP Address"
"AppDirectory"="C:\\EQEmu\\"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\PEQTGC Zone_2 Server\Parameters]
"Application"="C:\\EQEmu\\zone.exe . EXTERNAL_IP_ADDRESS YOUR External IP
Address INTERNAL_IP_ADDRESS YOUR Local IP Address"
"AppDirectory"="C:\\EQEmu\\"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\PEQTGC Zone_3 Server\Parameters]
"Application"="C:\\EQEmu\\zone.exe . EXTERNAL_IP_ADDRESS YOUR External IP
Address INTERNAL_IP_ADDRESS YOUR Local IP Address"
"AppDirectory"="C:\\EQEmu\\"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\PEQTGC Zone_4 Server\Parameters]
"Application"="C:\\EQEmu\\zone.exe . EXTERNAL_IP_ADDRESS YOUR External IP
Address INTERNAL_IP_ADDRESS YOUR Local IP Address"
"AppDirectory"="C:\\EQEmu\\"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\PEQTGC Zone_5 Server\Parameters]
"Application"="C:\\EQEmu\\zone.exe . EXTERNAL_IP_ADDRESS YOUR External IP
Address INTERNAL_IP_ADDRESS YOUR Local IP Address"
"AppDirectory"="C:\\EQEmu\\"
Not Sure if this will help people or Confuse them more but this is what i did to get mine working. if you have
problems Post on here i'll do my best to help you out.
P.S. if you do not have 64bit Operating System make sure you remove " (x86)" Above.