Ive read through the forums and on wiki and ive seen several times that the Starting zones for titanium is hardcoded. So I have been working with the code and I got most of it working but I noticed even in the entries already in the code for default bind point does not work. I tested it with good erudites, it has them start in city and when they die they goto Tox, this does not work, they go right to their starting point.
Unedited worlddb.cpp
Code:
void WorldDatabase::SetTitaniumDefaultStartZone(PlayerProfile_Struct* in_pp, CharCreate_Struct* in_cc)
{
switch (in_cc->start_zone)
{
case 0: // Erudin
{
if (in_cc->deity == 203) // Cazic-Thule Erudites go to Paineel
{
in_pp->zone_id = 75; // paineel
in_pp->binds[0].zoneId = 75; // broke
}
else
{
in_pp->zone_id = 24; // erudnext start zone
in_pp->binds[0].zoneId = 38; // tox does not go to tox broke
}
break;
}
Edited worlddb.cpp
Code:
case 1: // Qeynos
{
if (in_cc->deity == 201)
{
in_pp->x = -370.89; // works
in_pp->y = 361.61; // works
in_pp->z = -38.22; // works
in_pp->zone_id = 45; // qcat works
in_pp->binds[0].zoneId = 2; // broke
in_pp->binds[0].x = 120; // broke
in_pp->binds[0].y = 406.14; // broke
in_pp->binds[0].z = 1.88; // broke
}
else
{
in_pp->zone_id = 2; // qeynos2
in_pp->binds[0].zoneId = 2; // qeynos2 broke
}
break;
}
My manual set loc for starting X Y Z and zone_id = 45 works. The binds.zoneID, binds.x, binds.y, binds.z does not take hold. I have tried all kinds of variations.
I have deleted my starting_zones entries to make sure it loads defaults, which is the hardcode.
I am on titanium, thus why I am hardcoding it.
Any idea why the binds are not taking hold for the bind points and zone?