Thanks again for the quick response and help. I went ahead and corrected those items. For some reason though if I change the db: PEQ to localhost my server will not boot up.
I am able to log in to the server screen now but I do not see the server listed. I will attach a screenshot of what everything looks like.
Also, the following thread mentions "updating the DB to be accurate" I'm not sure if there is further action I need to take regarding that.
http://www.eqemulator.org/forums/showthread.php?
https://pasteboard.co/Is0lkij.png
I did add some additional items I believe I was missing that I took from the thread above.
If I understood you correctly I need to change " "db" : "peq", " to: " "db" : "localhost", " on both of the " "db" " entries. Is that correct?
when I did that the server would go in a loop over and over attempting to load up without ever populating all four windows.
Just making sure I'm not missing anything else, I've copied the json, .ini, and eqhost files all below here.
Does any of it look off?
Thanks again!
Here is my eqemu config file:
"
{
"server" : {
"chatserver" : {
"host" : "192.168.0.113",
"port" : "7778"
},
"database" : {
"db" : "peq",
"host" : "localhost",
"password" : "eqemu",
"port" : "3306",
"username" : "root"
},
"mailserver" : {
"host" : "192.168.0.113",
"port" : "7778"
},
"qsdatabase" : {
"db" : "peq",
"host" : "localhost",
"password" : "eqemu",
"port" : "3306",
"username" : "root"
},
"webinterface" : {
"port" : "9081"
},
"world" : {
"localaddress" : "192.168.0.113",
"http" : {
"enabled" : "true",
"mimefile" : "mime.types",
"port" : "9080"
},
"key" : "KfNJhzxGO6kJMKjdytVjgsoFUkahRzX",
"loginserver1" : {
"account" : "- my account name -",
"host" : "login.eqemulator.net",
"legacy" : "1",
"password" : "- my password - ",
"port" : "5999"
},
"loginserver2" : {
"account" : "- my account name -",
"host" : "192.168.0.113:",
"password" : "- my password -",
"port" : "5999"
},
"longname" : "EQUNBOUND",
"shortname" : "UNBND",
"tcp" : {
"ip" : "192.168.0.113",
"port" : "9001"
},
"telnet" : {
"enabled" : "true",
"ip" : "0.0.0.0",
"port" : "9000"
}
},
"zones" : {
"defaultstatus" : "0",
"ports" : {
"high" : "7400",
"low" : "7000"
}
}
}
}
"
and here is my login.ini:
"
[database]
host = localhost
port = 3306
db = peq
user = root
password = eqemu
subsystem = MySQL
[options]
unregistered_allowed = TRUE
reject_duplicate_servers = FALSE
trace = TRUE
world_trace = FALSE
dump_packets_in = FALSE
dump_packets_out = FALSE
listen_port = 5998
local_network = 192.168.0.
auto_create_accounts = TRUE
[security]
plugin = EQEmuAuthCrypto
mode = 5
[Titanium]
port = 5998
opcodes = login_opcodes.conf
[SoD]
port = 5999
opcodes = login_opcodes_sod.conf
[schema]
account_table = loginserver_server_accounts
world_registration_table = loginserver_world_server_registration
world_admin_registration_table = loginserver_server_admin_registration
world_server_type_table = loginserver_server_list_type
"
and here is my eqhost.txt in the client's directory:
"
[LoginServer]
Host=192.168.0.113:5999
"
Also, if I may, i'd like to clarify two other things:
As I am running the RoF client, shouldn't I have 5999 as my loginserver port? or should it still be 5998? and should I have the two separate loginserver entries in my json configured as I do as per this post? I added the original "loginserver 1" back into my json. after re-reading the guide once more. Trying to find and fix whatever it is I'm missing.
Thanks again for the information and your time!
Linear Mode
