COMPLETE PUBLIC SERVER SETUP - Jan-2011

[SavageFlame]

Just checked they are in there here is a pic so you can see how I have it... Hope this helps.



Not sure why it isn't finding them. Is there another spot it may need to go?

[sorvani]

because you did not follow the instruction i gave a few posts back.. you are compiling for the wrong platform.

also you never updated zlib reference for this one. no it is not needed, but for those who know not what they are doing you should simply copy paste from one project to the next..

[SavageFlame]

@sorvani I understand you are trying to help, but what you don't know is I made a new copy of the Zlib I copied it from the source folder into the c:\zlib so it runs off the same path so it is the right zlib.

Also you are saying I am not compiling the right platform? If you are meaning to say because it says releasebots on some and just release on the others that isn't my fault it is what happens when I choose release bots in the configuration manager.

Also I did check to make sure each of the references for each project were the right ones. I copied and pasted them from one project include and library to the other projects. And yeah I noticed that some of them don't release bots and some do release bots.

It did that when I put it on ReleaseBots, I went through and looked at it after putting it on releasebots, it shows up on world and zone but the others look like the picture just below this.

This one says Active(release) so I brought up the config so you can see its set to releasebots just like eqlaunch, queryserv, and ucs yet none of them say it on the active part it just says Active(release) not sure why.

As you can see in this pic ^ the pull down arrow shows only release no releasebots... It is the same for the others too. Except Zone and World, again no clue why.

This one shows that it says active(releasebots)

And this one shows that it says active(releasebots)


Again though Emusharemem, eqlaunch, queryserv, and ucs all show Active(Release) but under the configuration manager it shows what the above configuration manager shows.

Hopefully this might shed some more light on what I have wrong? =) I can hope and thank you for your time thus far its very appreciated. Sorry about the huge reply.

[sorvani]

look at your queryserv screen shot a little closer. it clearly shows x64......

the directories are stored PER build type. so even though you very clearly changed the directory for the x64 build (screen shot), you also very obviously did not change it for the x32 build (build errors).

[SavageFlame]

@sorvani no sir every time I put a check in it to run it I always put it to win32. That screenshot was taken on a build I did without the check in it. It just defaults to that without a check no clue why either.
If you look at the Emusharemem screenshot it shows that all are checked and set to win32.

This is what it looks like when I have it set to build it and I still get the 1 fail which is the queryserv. Without queryserv checked i get 5 Succeeded and 1 skipped, which is a good thing.
I just wanted them all to compile right 6 succeeded and what not lol.

[Uleat]

I've read enough on queryserv to completely confuse me...

My default configuration for win32 platform is for queryserv to build x64 and the build option unchecked.


Are you trying to make it build under win32?

I thought that it required x64 to work and that it was disabled for win32..or is this also now fixed?

[SavageFlame]

@Uleat mine does the same for default configuration for win32 platform for queryserv to build x64 and the build option unchecked.

So I always set it to win32 and make sure its that way in the project properties itself.

If you are right and it can't be compiled under 32 why is there an option for it? And if it can't then I've wasted a lot of your guys time trying to get it to compile in 32bit form lol...

[Uleat]

I honestly don't know..I haven't/can't compile under x64, so I just leave it as is. Works for me without it.

In regards to falling into Underland, if it does turn out that you can't, don't worry..I've taken my fair share of
victims down the rabbit hole and they still laugh at, err, I mean respect me!

[lerxst2112]

I was able to compile queryserv as 32-bit with no issues. I haven't run it, but compiling it is no problem.

If the linker error is the problem you're still having, open the properties for queryserv, go to configuration properties -> linker -> Additional Dependencies, and make sure zlib.lib is somewhere in the line. I didn't have to add it, but maybe it's missing for you.

One small tip, if you have an error, compile twice and paste the log from the second one. It will include the bare minimum of errors and such so someone doesn't need to read through hundreds of lines to try and see what the problem actually is.

[Uleat]

I just compiled too and had no issues on VC 10, ReleaseBots/Win32 and WinXp 32-bit.

Haven't tested the build yet either, but the standard array of warnings is all that I got..no failures.


(A neat little thing about the 'Output Window' in VS is that you can click the error line and it will take you straight
to the code segment where the error is located..though, it won't necessarily give you an understandable fix without
a working knowledge of the IDE.)

[sorvani]

I build both a 32 bit and a 64 bit server and they both compile and run fine with all 6 projects and the current revision. If you are experiencing something failing, then you have done something wrong.

Your error output clearly states you have things not linked.

[joligario]

What version of MySQL libraries are you using?

[SavageFlame]

Ok so I know I don't have much experience with Visual Studio C++ 2010 but I'm not an idiot you guys are saying I don't have something linked. Ok I get that but I've been through each project well over 20 times and everything that should be linked is as far as I can tell which is why I posted screen shots twice.

Here is what is in the queryserv-linker-input-additional dependencies

odbc32.lib
odbccp32.lib
wsock32.lib
zlib.lib

Everything that should be I think? Again I'm not professional with C++ by any means.

Also here are the programs I have installed.
Active Perl 5.14 32bit
C++ 2010
zlib (This is the zlib from the source I copied it into c:\zlib to make it easier)
Mysql 5.1 32bit

For queryserv and all the other projects this is what is on the C++ Directories for Include Directories
C:\mysql\include;C:\perl2\lib\CORE;C:\zlib\include ;$(IncludePath)

And this is what is on the queryserv and all other projects C++ Directories for Library Directories
C:\mysql\lib\opt;C:\perl2\lib\CORE;C:\zlib\lib;$(L ibraryPath)

And this is the Linker Additional Library Directories
C:\mysql\lib\opt;C:\perl2\lib\CORE;C:\zlib\lib;$(L ibraryPath)

And this is the build report with all of that 5 succeeded and 1 failed. Queryserv is always the one that fails I have no clue why but as you can see (as far as I can tell) I have all of the Linkers in their right spots.
Again I'm far from professional heck I'm far from proficient with C++ 2010. Or any C++ for that matter lol.

1>------ Rebuild All started: Project: EMuShareMem, Configuration: Release Win32 ------
1>Build started 7/25/2012 2:52:52 PM.
1>_PrepareForClean:
1>  Deleting file ".\../Build/EMuShareMem/Release\EMuShareMem.lastbuildstate".
1>InitializeBuildStatus:
1>  Creating ".\../Build/EMuShareMem/Release\EMuShareMem.unsuccessfulbuild" because "AlwaysCreate" was specified.
1>ClCompile:
1>  DLLMain.cpp
1>  Doors.cpp
1>  Items.cpp
1>  Loot.cpp
1>  MMF.cpp
1>MMF.cpp(325): warning C4532: 'return' : jump out of __finally block has undefined behavior during termination handling
1>  NPCFactionLists.cpp
1>  NPCTypes.cpp
1>  Opcodes.cpp
1>  SkillCaps.cpp
1>  Spells.cpp
1>  debug.cpp
1>  Mutex.cpp
1>  SharedLibrary.cpp
1>  timer.cpp
1>  Generating Code...
1>Link:
1>     Creating library .\../Build/EMuShareMem/EMuShareMem.lib and object .\../Build/EMuShareMem/EMuShareMem.exp
1>  EMuShareMem.vcxproj -> C:\source2\trunk\EQEmuServer\EMuShareMem\.\..\Build\EMuShareMem.dll
1>FinalizeBuildStatus:
1>  Deleting file ".\../Build/EMuShareMem/Release\EMuShareMem.unsuccessfulbuild".
1>  Touching ".\../Build/EMuShareMem/Release\EMuShareMem.lastbuildstate".
1>
1>Build succeeded.
1>
1>Time Elapsed 00:00:08.86
2>------ Rebuild All started: Project: World, Configuration: ReleaseBots Win32 ------
2>Build started 7/25/2012 2:53:01 PM.
2>_PrepareForClean:
2>  Deleting file "ReleaseBots\World.lastbuildstate".
2>InitializeBuildStatus:
2>  Creating "ReleaseBots\World.unsuccessfulbuild" because "AlwaysCreate" was specified.
2>ClCompile:
2>  Adventure.cpp
2>  AdventureManager.cpp
2>  client.cpp
2>  cliententry.cpp
2>  clientlist.cpp
2>  console.cpp
2>  EQLConfig.cpp
2>  EQW.cpp
2>  EQWHTTPHandler.cpp
2>  EQWParser.cpp
2>  HTTPRequest.cpp
2>  LauncherLink.cpp
2>  LauncherList.cpp
2>  lfplist.cpp
2>  LoginServer.cpp
2>  LoginServerList.cpp
2>  net.cpp
2>  perl_EQLConfig.cpp
2>  perl_EQW.cpp
2>  perl_HTTPRequest.cpp
2>  Generating Code...
2>  Compiling...
2>  queryserv.cpp
2>  wguild_mgr.cpp
2>  world_logsys.cpp
2>  WorldConfig.cpp
2>  worlddb.cpp
2>  zonelist.cpp
2>  zoneserver.cpp
2>  ucs.cpp
2>  Anniversary.cpp
2>  Client62.cpp
2>  Underfoot.cpp
2>  HoT.cpp
2>  Patches.cpp
2>  SoD.cpp
2>  SoF.cpp
2>  Titanium.cpp
2>  Base64.cpp
2>  BasePacket.cpp
2>  classes.cpp
2>  Condition.cpp
2>  Generating Code...
2>  Compiling...
2>  CRC16.cpp
2>  crc32.cpp
2>  database.cpp
2>  dbasync.cpp
2>  dbcore.cpp
2>  DBMemLeak.cpp
2>  debug.cpp
2>  emu_opcodes.cpp
2>  EMuShareMem.cpp
2>  EmuTCPConnection.cpp
2>  EmuTCPServer.cpp
2>  EQDB.cpp
2>  EQDBRes.cpp
2>  EQEmuConfig.cpp
2>  EQEMuError.cpp
2>  EQPacket.cpp
2>  EQStream.cpp
2>  EQStreamFactory.cpp
2>  EQStreamIdent.cpp
2>  EQStreamProxy.cpp
2>  Generating Code...
2>  Compiling...
2>  eqtime.cpp
2>  extprofile.cpp
2>  File.cpp
2>  guild_base.cpp
2>  guilds.cpp
2>  HttpdCookies.cpp
2>  HttpdForm.cpp
2>  HttpdSocket.cpp
2>  HTTPSocket.cpp
2>  Item.cpp
2>  logsys.cpp
2>  logsys_eqemu.cpp
2>  md5.cpp
2>  MemFile.cpp
2>  Mime.cpp
2>  misc.cpp
2>  MiscFunctions.cpp
2>  moremath.cpp
2>  Mutex.cpp
2>  opcodemgr.cpp
2>  Generating Code...
2>c:\source2\trunk\eqemuserver\common\socketlib\httpsocket.cpp(115): warning C4715: 'HTTPSocket::ProcessReceivedData' : not all control paths return a value
2>  Compiling...
2>  packet_dump.cpp
2>  packet_dump_file.cpp
2>  packet_functions.cpp
2>  Parse.cpp
2>  perl_EQDB.cpp
2>  perl_EQDBRes.cpp
2>  races.cpp
2>  rulesys.cpp
2>  serverinfo.cpp
2>  shareddb.cpp
2>  SharedLibrary.cpp
2>  socket_include.cpp
2>  StructStrategy.cpp
2>  TCPConnection.cpp
2>  TCPServer.cpp
2>  timeoutmgr.cpp
2>  timer.cpp
2>  tinystr.cpp
2>  tinyxml.cpp
2>  tinyxmlerror.cpp
2>  Generating Code...
2>  Compiling...
2>  tinyxmlparser.cpp
2>  Utility.cpp
2>  XMLParser.cpp
2>  Generating Code...
2>Link:
2>  World.vcxproj -> C:\source2\trunk\EQEmuServer\world\.\..\build\World.exe
2>FinalizeBuildStatus:
2>  Deleting file "ReleaseBots\World.unsuccessfulbuild".
2>  Touching "ReleaseBots\World.lastbuildstate".
2>
2>Build succeeded.
2>
2>Time Elapsed 00:01:43.43
3>------ Rebuild All started: Project: Zone, Configuration: ReleaseBots Win32 ------
3>Build started 7/25/2012 2:54:45 PM.
3>_PrepareForClean:
3>  Deleting file "ReleaseBots\Zone.lastbuildstate".
3>InitializeBuildStatus:
3>  Creating "ReleaseBots\Zone.unsuccessfulbuild" because "AlwaysCreate" was specified.
3>ClCompile:
3>  AA.cpp
3>  aggro.cpp
3>  attack.cpp
3>  beacon.cpp
3>  bonuses.cpp
3>  bot.cpp
3>  botspellsai.cpp
3>  client.cpp
3>  client_logs.cpp
3>  client_mods.cpp
3>  client_packet.cpp
3>  client_process.cpp
3>  command.cpp
3>  doors.cpp
3>  effects.cpp
3>  embparser.cpp
3>  embperl.cpp
3>  embxs.cpp
3>  entity.cpp
3>  EQEMuError.cpp
3>  Generating Code...
3>  Compiling...
3>  exp.cpp
3>  faction.cpp
3>  fearpath.cpp
3>  forage.cpp
3>  groups.cpp
3>  guild.cpp
3>  guild_mgr.cpp
3>  hate_list.cpp
3>  horse.cpp
3>  inventory.cpp
3>  loottables.cpp
3>  Map.cpp
3>  mob.cpp
3>  MobAI.cpp
3>  net.cpp
3>  npc.cpp
3>  Object.cpp
3>  parser.cpp
3>  pathing.cpp
3>  perl_client.cpp
3>  Generating Code...
3>  Compiling...
3>  perl_doors.cpp
3>  perl_entity.cpp
3>  perl_groups.cpp
3>  perl_hateentry.cpp
3>  perl_mob.cpp
3>  perl_npc.cpp
3>  perl_object.cpp
3>  perl_perlpacket.cpp
3>  perl_PlayerCorpse.cpp
3>  perl_questitem.cpp
3>  perl_raids.cpp
3>  perlpacket.cpp
3>  perlparser.cpp
3>  petitions.cpp
3>  pets.cpp
3>  PlayerCorpse.cpp
3>  ptimer.cpp
3>  QGlobals.cpp
3>  questmgr.cpp
3>  QuestParserCollection.cpp
3>  Generating Code...
3>  Compiling...
3>  raids.cpp
3>  spawn2.cpp
3>  spawngroup.cpp
3>  spdat.cpp
3>  special_attacks.cpp
3>  spell_effects.cpp
3>  spells.cpp
3>  tasks.cpp
3>  titles.cpp
3>  tradeskills.cpp
3>  trading.cpp
3>  trap.cpp
3>  tribute.cpp
3>  watermap.cpp
3>  waypoints.cpp
3>  worldserver.cpp
3>  zone.cpp
3>  zone_logsys.cpp
3>  ZoneConfig.cpp
3>  zonedb.cpp
3>  Generating Code...
3>  Compiling...
3>  zonedbasync.cpp
3>  zoning.cpp
3>  Anniversary.cpp
3>  Client62.cpp
3>  HoT.cpp
3>  patches.cpp
3>  SoD.cpp
3>  SoF.cpp
3>  Titanium.cpp
3>  Underfoot.cpp
3>  BasePacket.cpp
3>  classes.cpp
3>  Condition.cpp
3>  CRC16.cpp
3>  crc32.cpp
3>  database.cpp
3>  dbasync.cpp
3>  dbcore.cpp
3>  DBMemLeak.cpp
3>  debug.cpp
3>  Generating Code...
3>  Compiling...
3>  emu_opcodes.cpp
3>  EMuShareMem.cpp
3>  EmuTCPConnection.cpp
3>  EmuTCPServer.cpp
3>  EQEmuConfig.cpp
3>  EQPacket.cpp
3>  EQStream.cpp
3>  EQStreamFactory.cpp
3>  EQStreamIdent.cpp
3>  EQStreamProxy.cpp
3>  eqtime.cpp
3>  extprofile.cpp
3>  guild_base.cpp
3>  guilds.cpp
3>  Item.cpp
3>  logsys.cpp
3>  logsys_eqemu.cpp
3>  md5.cpp
3>  misc.cpp
3>  MiscFunctions.cpp
3>  Generating Code...
3>  Compiling...
3>  moremath.cpp
3>  Mutex.cpp
3>  opcodemgr.cpp
3>  packet_dump.cpp
3>  packet_dump_file.cpp
3>  packet_functions.cpp
3>  races.cpp
3>  rdtsc.cpp
3>  rulesys.cpp
3>  serverinfo.cpp
3>  shareddb.cpp
3>  SharedLibrary.cpp
3>  StructStrategy.cpp
3>  TCPConnection.cpp
3>  TCPServer.cpp
3>  timeoutmgr.cpp
3>  timer.cpp
3>  tinystr.cpp
3>  tinyxml.cpp
3>  tinyxmlerror.cpp
3>  Generating Code...
3>  Compiling...
3>  tinyxmlparser.cpp
3>  worldconn.cpp
3>  XMLParser.cpp
3>  Generating Code...
3>Link:
3>  Zone.vcxproj -> C:\source2\trunk\EQEmuServer\zone\.\..\Build\Zone.exe
3>FinalizeBuildStatus:
3>  Deleting file "ReleaseBots\Zone.unsuccessfulbuild".
3>  Touching "ReleaseBots\Zone.lastbuildstate".
3>
3>Build succeeded.
3>
3>Time Elapsed 00:03:28.91
4>------ Rebuild All started: Project: eqlaunch, Configuration: Release Win32 ------
4>Build started 7/25/2012 2:58:14 PM.
4>_PrepareForClean:
4>  Deleting file ".\../Build/eqlaunch/Release\eqlaunch.lastbuildstate".
4>InitializeBuildStatus:
4>  Creating ".\../Build/eqlaunch/Release\eqlaunch.unsuccessfulbuild" because "AlwaysCreate" was specified.
4>ClCompile:
4>  eqlaunch.cpp
4>  worldserver.cpp
4>  ZoneLaunch.cpp
4>  debug.cpp
4>  EmuTCPConnection.cpp
4>  EmuTCPServer.cpp
4>  EQEmuConfig.cpp
4>  logsys.cpp
4>  logsys_eqemu.cpp
4>  md5.cpp
4>c:\source2\trunk\eqemuserver\common\../common/seperator.h(42): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
4>..\common\md5.cpp(61): warning C4996: '_snprintf': This function or variable may be unsafe. Consider using _snprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(363) : see declaration of '_snprintf'
4>  misc.cpp
4>  MiscFunctions.cpp
4>  Mutex.cpp
4>..\common\Mutex.cpp(128): warning C4800: 'BOOL' : forcing value to bool 'true' or 'false' (performance warning)
4>  packet_dump.cpp
4>  packet_functions.cpp
4>  ProcLauncher.cpp
4>  TCPConnection.cpp
4>  TCPServer.cpp
4>  timer.cpp
4>..\common\timer.cpp(68): warning C4244: '=' : conversion from 'time_t' to 'long', possible loss of data
4>  tinystr.cpp
4>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
4>  Generating Code...
4>  Compiling...
4>  tinyxml.cpp
4>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
4>..\common\tinyxml\tinyxml.cpp(103): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>..\common\tinyxml\tinyxml.cpp(126): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
4>..\common\tinyxml\tinyxml.cpp(718): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>..\common\tinyxml\tinyxml.cpp(726): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>..\common\tinyxml\tinyxml.cpp(944): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
4>..\common\tinyxml\tinyxml.cpp(989): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
4>..\common\tinyxml\tinyxml.cpp(1122): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
4>..\common\tinyxml\tinyxml.cpp(1129): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
4>..\common\tinyxml\tinyxml.cpp(1137): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>..\common\tinyxml\tinyxml.cpp(1144): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>  tinyxmlerror.cpp
4>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
4>  tinyxmlparser.cpp
4>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
4>  worldconn.cpp
4>  XMLParser.cpp
4>  Generating Code...
4>LINK : warning LNK4098: defaultlib 'LIBCMT' conflicts with use of other libs; use /NODEFAULTLIB:library
4>  eqlaunch.vcxproj -> C:\source2\trunk\EQEmuServer\eqlaunch\.\..\Build\eqlaunch.exe
4>FinalizeBuildStatus:
4>  Deleting file ".\../Build/eqlaunch/Release\eqlaunch.unsuccessfulbuild".
4>  Touching ".\../Build/eqlaunch/Release\eqlaunch.lastbuildstate".
4>
4>Build succeeded.
4>
4>Time Elapsed 00:00:15.88
5>------ Rebuild All started: Project: ucs, Configuration: Release Win32 ------
6>------ Rebuild All started: Project: queryserv, Configuration: Release Win32 ------
6>Build started 7/25/2012 2:58:30 PM.
6>_PrepareForClean:
6>  Deleting file ".\../Build/queryserv/Release\queryserv.lastbuildstate".
5>Build started 7/25/2012 2:58:30 PM.
5>_PrepareForClean:
5>  Deleting file ".\../Build/ucs/Release\ucs.lastbuildstate".
6>InitializeBuildStatus:
6>  Touching ".\../Build/queryserv/Release\queryserv.unsuccessfulbuild".
5>InitializeBuildStatus:
5>  Creating ".\../Build/ucs/Release\ucs.unsuccessfulbuild" because "AlwaysCreate" was specified.
6>ClCompile:
6>  database.cpp
5>ClCompile:
5>  chatchannel.cpp
6>  queryserv.cpp
5>  clientlist.cpp
6>  queryservconfig.cpp
5>clientlist.cpp(1012): warning C4018: '<' : signed/unsigned mismatch
5>clientlist.cpp(1314): warning C4018: '<' : signed/unsigned mismatch
5>clientlist.cpp(1317): warning C4018: '<' : signed/unsigned mismatch
5>clientlist.cpp(1427): warning C4018: '<' : signed/unsigned mismatch
5>clientlist.cpp(1430): warning C4018: '<' : signed/unsigned mismatch
5>  database.cpp
6>  worldserver.cpp
5>database.cpp(586): warning C4244: 'initializing' : conversion from 'time_t' to 'int', possible loss of data
5>  ucs.cpp
6>  BasePacket.cpp
5>  ucsconfig.cpp
6>  Condition.cpp
6>  CRC16.cpp
6>  crc32.cpp
6>  dbcore.cpp
5>  worldserver.cpp
6>..\common\dbcore.cpp(199): warning C4244: '=' : conversion from 'my_ulonglong' to 'int32', possible loss of data
6>..\common\dbcore.cpp(201): warning C4244: '=' : conversion from 'my_ulonglong' to 'int32', possible loss of data
6>  debug.cpp
5>  BasePacket.cpp
6>  emu_opcodes.cpp
6>  EmuTCPConnection.cpp
5>  Condition.cpp
5>  CRC16.cpp
5>  crc32.cpp
5>  dbcore.cpp
6>  EmuTCPServer.cpp
5>..\common\dbcore.cpp(199): warning C4244: '=' : conversion from 'my_ulonglong' to 'int32', possible loss of data
5>..\common\dbcore.cpp(201): warning C4244: '=' : conversion from 'my_ulonglong' to 'int32', possible loss of data
5>  debug.cpp
6>  EQEmuConfig.cpp
5>  emu_opcodes.cpp
5>  EmuTCPConnection.cpp
6>  EQPacket.cpp
5>  EmuTCPServer.cpp
6>..\common\EQPacket.cpp(206): warning C4244: '=' : conversion from 'const uint16' to 'unsigned char', possible loss of data
6>..\common\EQPacket.cpp(218): warning C4244: '=' : conversion from 'uint16' to 'unsigned char', possible loss of data
6>..\common\EQPacket.cpp(343): warning C4244: 'initializing' : conversion from 'unsigned long' to 'uint16', possible loss of data
6>  EQStream.cpp
5>  EQEmuConfig.cpp
6>..\common\EQStream.cpp(73): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(331): warning C4800: 'int' : forcing value to bool 'true' or 'false' (performance warning)
6>..\common\EQStream.cpp(382): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(397): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(414): warning C4244: 'argument' : conversion from 'uint64' to 'u_long', possible loss of data
6>..\common\EQStream.cpp(414): warning C4244: 'argument' : conversion from 'uint64' to 'u_long', possible loss of data
6>..\common\EQStream.cpp(539): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(551): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(602): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
6>..\common\EQStream.cpp(602): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
6>..\common\EQStream.cpp(603): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
6>..\common\EQStream.cpp(660): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(663): warning C4244: 'initializing' : conversion from 'long' to 'uint16', possible loss of data
6>..\common\EQStream.cpp(703): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(772): warning C4244: 'argument' : conversion from 'unsigned long' to 'u_short', possible loss of data
6>..\common\EQStream.cpp(844): warning C4244: 'argument' : conversion from 'time_t' to 'u_long', possible loss of data
6>..\common\EQStream.cpp(1082): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(1119): warning C4018: '>' : signed/unsigned mismatch
6>  EQStreamFactory.cpp
5>  EQPacket.cpp
6>  EQStreamIdent.cpp
5>..\common\EQPacket.cpp(206): warning C4244: '=' : conversion from 'const uint16' to 'unsigned char', possible loss of data
5>..\common\EQPacket.cpp(218): warning C4244: '=' : conversion from 'uint16' to 'unsigned char', possible loss of data
5>..\common\EQPacket.cpp(343): warning C4244: 'initializing' : conversion from 'unsigned long' to 'uint16', possible loss of data
5>  EQStream.cpp
6>  EQStreamProxy.cpp
5>..\common\EQStream.cpp(73): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(331): warning C4800: 'int' : forcing value to bool 'true' or 'false' (performance warning)
5>..\common\EQStream.cpp(382): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(397): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(414): warning C4244: 'argument' : conversion from 'uint64' to 'u_long', possible loss of data
5>..\common\EQStream.cpp(414): warning C4244: 'argument' : conversion from 'uint64' to 'u_long', possible loss of data
5>..\common\EQStream.cpp(539): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(551): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(602): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
5>..\common\EQStream.cpp(602): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
5>..\common\EQStream.cpp(603): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
5>..\common\EQStream.cpp(660): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(663): warning C4244: 'initializing' : conversion from 'long' to 'uint16', possible loss of data
5>..\common\EQStream.cpp(703): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(772): warning C4244: 'argument' : conversion from 'unsigned long' to 'u_short', possible loss of data
5>..\common\EQStream.cpp(844): warning C4244: 'argument' : conversion from 'time_t' to 'u_long', possible loss of data
5>..\common\EQStream.cpp(1082): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(1119): warning C4018: '>' : signed/unsigned mismatch
5>  EQStreamFactory.cpp
6>  logsys.cpp
5>  EQStreamIdent.cpp
6>  Compiling...
6>  logsys_eqemu.cpp
6>  md5.cpp
6>c:\source2\trunk\eqemuserver\common\../common/seperator.h(42): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\md5.cpp(61): warning C4996: '_snprintf': This function or variable may be unsafe. Consider using _snprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(363) : see declaration of '_snprintf'
6>  misc.cpp
5>  Compiling...
5>  EQStreamProxy.cpp
6>  MiscFunctions.cpp
5>  logsys.cpp
6>  moremath.cpp
5>  logsys_eqemu.cpp
6>  Mutex.cpp
5>  md5.cpp
5>c:\source2\trunk\eqemuserver\common\../common/seperator.h(42): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\md5.cpp(61): warning C4996: '_snprintf': This function or variable may be unsafe. Consider using _snprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(363) : see declaration of '_snprintf'
5>  misc.cpp
6>..\common\Mutex.cpp(128): warning C4800: 'BOOL' : forcing value to bool 'true' or 'false' (performance warning)
6>  opcodemgr.cpp
5>  MiscFunctions.cpp
6>  packet_dump.cpp
5>  moremath.cpp
6>  packet_dump_file.cpp
5>  Mutex.cpp
5>..\common\Mutex.cpp(128): warning C4800: 'BOOL' : forcing value to bool 'true' or 'false' (performance warning)
6>  packet_functions.cpp
5>  opcodemgr.cpp
6>  rdtsc.cpp
5>  packet_dump.cpp
6>  rulesys.cpp
5>  packet_dump_file.cpp
6>..\common\rulesys.cpp(177): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(40): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(240): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(241): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(281): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(282): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(289): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(290): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(292): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(314): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(315): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(316): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(317): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(318): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(319): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(320): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(321): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(397): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(398): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(401): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(402): warning C4305: '=' : truncation from 'double' to 'float'
6>  serverinfo.cpp
6>..\common\serverinfo.cpp(32): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(48): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(53): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(57): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(61): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(66): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(70): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(74): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(81): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(85): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(89): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(93): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(97): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>  SharedLibrary.cpp
5>  packet_functions.cpp
6>..\common\SharedLibrary.cpp(112): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>  StructStrategy.cpp
5>  rdtsc.cpp
5>  rulesys.cpp
6>  TCPConnection.cpp
5>..\common\rulesys.cpp(177): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(40): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(240): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(241): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(281): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(282): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(289): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(290): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(292): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(314): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(315): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(316): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(317): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(318): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(319): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(320): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(321): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(397): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(398): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(401): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(402): warning C4305: '=' : truncation from 'double' to 'float'
5>  serverinfo.cpp
6>  TCPServer.cpp
5>..\common\serverinfo.cpp(32): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(48): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(53): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(57): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(61): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(66): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(70): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(74): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(81): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(85): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(89): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(93): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(97): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>  SharedLibrary.cpp
6>  timeoutmgr.cpp
5>..\common\SharedLibrary.cpp(112): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>  StructStrategy.cpp
6>  timer.cpp
5>  TCPConnection.cpp
6>..\common\timer.cpp(68): warning C4244: '=' : conversion from 'time_t' to 'long', possible loss of data
6>  tinystr.cpp
6>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
6>  Compiling...
6>  tinyxml.cpp
5>  TCPServer.cpp
6>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
6>..\common\tinyxml\tinyxml.cpp(103): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>..\common\tinyxml\tinyxml.cpp(126): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\tinyxml\tinyxml.cpp(718): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>..\common\tinyxml\tinyxml.cpp(726): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>..\common\tinyxml\tinyxml.cpp(944): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
6>..\common\tinyxml\tinyxml.cpp(989): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
6>..\common\tinyxml\tinyxml.cpp(1122): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
6>..\common\tinyxml\tinyxml.cpp(1129): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
6>..\common\tinyxml\tinyxml.cpp(1137): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>..\common\tinyxml\tinyxml.cpp(1144): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>  tinyxmlerror.cpp
5>  timeoutmgr.cpp
6>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
6>  tinyxmlparser.cpp
6>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
6>  unix.cpp
6>  worldconn.cpp
5>  Compiling...
5>  timer.cpp
5>..\common\timer.cpp(68): warning C4244: '=' : conversion from 'time_t' to 'long', possible loss of data
5>  tinystr.cpp
6>  XMLParser.cpp
5>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
5>  tinyxml.cpp
5>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
5>..\common\tinyxml\tinyxml.cpp(103): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>..\common\tinyxml\tinyxml.cpp(126): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\tinyxml\tinyxml.cpp(718): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>..\common\tinyxml\tinyxml.cpp(726): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>..\common\tinyxml\tinyxml.cpp(944): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
5>..\common\tinyxml\tinyxml.cpp(989): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
5>..\common\tinyxml\tinyxml.cpp(1122): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
5>..\common\tinyxml\tinyxml.cpp(1129): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
5>..\common\tinyxml\tinyxml.cpp(1137): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>..\common\tinyxml\tinyxml.cpp(1144): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>  tinyxmlerror.cpp
5>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
5>  tinyxmlparser.cpp
6>LINK : fatal error LNK1181: cannot open input file 'mysql.h'
5>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
6>
6>Build FAILED.
6>
6>Time Elapsed 00:00:24.13
5>  unix.cpp
5>  worldconn.cpp
5>  XMLParser.cpp
5>Link:
5>  Generating code
5>  Finished generating code
5>  ucs.vcxproj -> C:\source2\trunk\EQEmuServer\ucs\.\..\Build\Chatserver.exe
5>FinalizeBuildStatus:
5>  Deleting file ".\../Build/ucs/Release\ucs.unsuccessfulbuild".
5>  Touching ".\../Build/ucs/Release\ucs.lastbuildstate".
5>
5>Build succeeded.
5>
5>Time Elapsed 00:00:31.32
========== Rebuild All: 5 succeeded, 1 failed, 0 skipped ==========

From what I can see it says it can't open mysql.h which is in the c:\mysql\inclue folder.
Does server10.sin use a different version of mysql? I'm using mysql 5.1 .

[lerxst2112]

And out of that giant wall of text, here is the one important line:

6>LINK : fatal error LNK1181: cannot open input file 'mysql.h'

Are you sure you didn't maybe paste something in the wrong spot? The linker should never be trying to open a .h file unless you added it accidentally to the additional dependencies.

[SavageFlame]

Ok I did put mysql.h in there but only after reading that it wasn't opening it in the last build without it. I just took it out and this is the build report I get:

1>------ Rebuild All started: Project: EMuShareMem, Configuration: Release Win32 ------
1>Build started 7/25/2012 4:49:19 PM.
1>_PrepareForClean:
1>  Deleting file ".\../Build/EMuShareMem/Release\EMuShareMem.lastbuildstate".
1>InitializeBuildStatus:
1>  Creating ".\../Build/EMuShareMem/Release\EMuShareMem.unsuccessfulbuild" because "AlwaysCreate" was specified.
1>ClCompile:
1>  DLLMain.cpp
1>  Doors.cpp
1>  Items.cpp
1>  Loot.cpp
1>  MMF.cpp
1>MMF.cpp(325): warning C4532: 'return' : jump out of __finally block has undefined behavior during termination handling
1>  NPCFactionLists.cpp
1>  NPCTypes.cpp
1>  Opcodes.cpp
1>  SkillCaps.cpp
1>  Spells.cpp
1>  debug.cpp
1>  Mutex.cpp
1>  SharedLibrary.cpp
1>  timer.cpp
1>  Generating Code...
1>Link:
1>     Creating library .\../Build/EMuShareMem/EMuShareMem.lib and object .\../Build/EMuShareMem/EMuShareMem.exp
1>  EMuShareMem.vcxproj -> C:\source2\trunk\EQEmuServer\EMuShareMem\.\..\Build\EMuShareMem.dll
1>FinalizeBuildStatus:
1>  Deleting file ".\../Build/EMuShareMem/Release\EMuShareMem.unsuccessfulbuild".
1>  Touching ".\../Build/EMuShareMem/Release\EMuShareMem.lastbuildstate".
1>
1>Build succeeded.
1>
1>Time Elapsed 00:00:08.76
2>------ Rebuild All started: Project: World, Configuration: ReleaseBots Win32 ------
2>Build started 7/25/2012 4:49:28 PM.
2>_PrepareForClean:
2>  Deleting file "ReleaseBots\World.lastbuildstate".
2>InitializeBuildStatus:
2>  Creating "ReleaseBots\World.unsuccessfulbuild" because "AlwaysCreate" was specified.
2>ClCompile:
2>  Adventure.cpp
2>  AdventureManager.cpp
2>  client.cpp
2>  cliententry.cpp
2>  clientlist.cpp
2>  console.cpp
2>  EQLConfig.cpp
2>  EQW.cpp
2>  EQWHTTPHandler.cpp
2>  EQWParser.cpp
2>  HTTPRequest.cpp
2>  LauncherLink.cpp
2>  LauncherList.cpp
2>  lfplist.cpp
2>  LoginServer.cpp
2>  LoginServerList.cpp
2>  net.cpp
2>  perl_EQLConfig.cpp
2>  perl_EQW.cpp
2>  perl_HTTPRequest.cpp
2>  Generating Code...
2>  Compiling...
2>  queryserv.cpp
2>  wguild_mgr.cpp
2>  world_logsys.cpp
2>  WorldConfig.cpp
2>  worlddb.cpp
2>  zonelist.cpp
2>  zoneserver.cpp
2>  ucs.cpp
2>  Anniversary.cpp
2>  Client62.cpp
2>  Underfoot.cpp
2>  HoT.cpp
2>  Patches.cpp
2>  SoD.cpp
2>  SoF.cpp
2>  Titanium.cpp
2>  Base64.cpp
2>  BasePacket.cpp
2>  classes.cpp
2>  Condition.cpp
2>  Generating Code...
2>  Compiling...
2>  CRC16.cpp
2>  crc32.cpp
2>  database.cpp
2>  dbasync.cpp
2>  dbcore.cpp
2>  DBMemLeak.cpp
2>  debug.cpp
2>  emu_opcodes.cpp
2>  EMuShareMem.cpp
2>  EmuTCPConnection.cpp
2>  EmuTCPServer.cpp
2>  EQDB.cpp
2>  EQDBRes.cpp
2>  EQEmuConfig.cpp
2>  EQEMuError.cpp
2>  EQPacket.cpp
2>  EQStream.cpp
2>  EQStreamFactory.cpp
2>  EQStreamIdent.cpp
2>  EQStreamProxy.cpp
2>  Generating Code...
2>  Compiling...
2>  eqtime.cpp
2>  extprofile.cpp
2>  File.cpp
2>  guild_base.cpp
2>  guilds.cpp
2>  HttpdCookies.cpp
2>  HttpdForm.cpp
2>  HttpdSocket.cpp
2>  HTTPSocket.cpp
2>  Item.cpp
2>  logsys.cpp
2>  logsys_eqemu.cpp
2>  md5.cpp
2>  MemFile.cpp
2>  Mime.cpp
2>  misc.cpp
2>  MiscFunctions.cpp
2>  moremath.cpp
2>  Mutex.cpp
2>  opcodemgr.cpp
2>  Generating Code...
2>c:\source2\trunk\eqemuserver\common\socketlib\httpsocket.cpp(115): warning C4715: 'HTTPSocket::ProcessReceivedData' : not all control paths return a value
2>  Compiling...
2>  packet_dump.cpp
2>  packet_dump_file.cpp
2>  packet_functions.cpp
2>  Parse.cpp
2>  perl_EQDB.cpp
2>  perl_EQDBRes.cpp
2>  races.cpp
2>  rulesys.cpp
2>  serverinfo.cpp
2>  shareddb.cpp
2>  SharedLibrary.cpp
2>  socket_include.cpp
2>  StructStrategy.cpp
2>  TCPConnection.cpp
2>  TCPServer.cpp
2>  timeoutmgr.cpp
2>  timer.cpp
2>  tinystr.cpp
2>  tinyxml.cpp
2>  tinyxmlerror.cpp
2>  Generating Code...
2>  Compiling...
2>  tinyxmlparser.cpp
2>  Utility.cpp
2>  XMLParser.cpp
2>  Generating Code...
2>Link:
2>  World.vcxproj -> C:\source2\trunk\EQEmuServer\world\.\..\build\World.exe
2>FinalizeBuildStatus:
2>  Deleting file "ReleaseBots\World.unsuccessfulbuild".
2>  Touching "ReleaseBots\World.lastbuildstate".
2>
2>Build succeeded.
2>
2>Time Elapsed 00:01:41.75
3>------ Rebuild All started: Project: Zone, Configuration: ReleaseBots Win32 ------
3>Build started 7/25/2012 4:51:10 PM.
3>_PrepareForClean:
3>  Deleting file "ReleaseBots\Zone.lastbuildstate".
3>InitializeBuildStatus:
3>  Creating "ReleaseBots\Zone.unsuccessfulbuild" because "AlwaysCreate" was specified.
3>ClCompile:
3>  AA.cpp
3>  aggro.cpp
3>  attack.cpp
3>  beacon.cpp
3>  bonuses.cpp
3>  bot.cpp
3>  botspellsai.cpp
3>  client.cpp
3>  client_logs.cpp
3>  client_mods.cpp
3>  client_packet.cpp
3>  client_process.cpp
3>  command.cpp
3>  doors.cpp
3>  effects.cpp
3>  embparser.cpp
3>  embperl.cpp
3>  embxs.cpp
3>  entity.cpp
3>  EQEMuError.cpp
3>  Generating Code...
3>  Compiling...
3>  exp.cpp
3>  faction.cpp
3>  fearpath.cpp
3>  forage.cpp
3>  groups.cpp
3>  guild.cpp
3>  guild_mgr.cpp
3>  hate_list.cpp
3>  horse.cpp
3>  inventory.cpp
3>  loottables.cpp
3>  Map.cpp
3>  mob.cpp
3>  MobAI.cpp
3>  net.cpp
3>  npc.cpp
3>  Object.cpp
3>  parser.cpp
3>  pathing.cpp
3>  perl_client.cpp
3>  Generating Code...
3>  Compiling...
3>  perl_doors.cpp
3>  perl_entity.cpp
3>  perl_groups.cpp
3>  perl_hateentry.cpp
3>  perl_mob.cpp
3>  perl_npc.cpp
3>  perl_object.cpp
3>  perl_perlpacket.cpp
3>  perl_PlayerCorpse.cpp
3>  perl_questitem.cpp
3>  perl_raids.cpp
3>  perlpacket.cpp
3>  perlparser.cpp
3>  petitions.cpp
3>  pets.cpp
3>  PlayerCorpse.cpp
3>  ptimer.cpp
3>  QGlobals.cpp
3>  questmgr.cpp
3>  QuestParserCollection.cpp
3>  Generating Code...
3>  Compiling...
3>  raids.cpp
3>  spawn2.cpp
3>  spawngroup.cpp
3>  spdat.cpp
3>  special_attacks.cpp
3>  spell_effects.cpp
3>  spells.cpp
3>  tasks.cpp
3>  titles.cpp
3>  tradeskills.cpp
3>  trading.cpp
3>  trap.cpp
3>  tribute.cpp
3>  watermap.cpp
3>  waypoints.cpp
3>  worldserver.cpp
3>  zone.cpp
3>  zone_logsys.cpp
3>  ZoneConfig.cpp
3>  zonedb.cpp
3>  Generating Code...
3>  Compiling...
3>  zonedbasync.cpp
3>  zoning.cpp
3>  Anniversary.cpp
3>  Client62.cpp
3>  HoT.cpp
3>  patches.cpp
3>  SoD.cpp
3>  SoF.cpp
3>  Titanium.cpp
3>  Underfoot.cpp
3>  BasePacket.cpp
3>  classes.cpp
3>  Condition.cpp
3>  CRC16.cpp
3>  crc32.cpp
3>  database.cpp
3>  dbasync.cpp
3>  dbcore.cpp
3>  DBMemLeak.cpp
3>  debug.cpp
3>  Generating Code...
3>  Compiling...
3>  emu_opcodes.cpp
3>  EMuShareMem.cpp
3>  EmuTCPConnection.cpp
3>  EmuTCPServer.cpp
3>  EQEmuConfig.cpp
3>  EQPacket.cpp
3>  EQStream.cpp
3>  EQStreamFactory.cpp
3>  EQStreamIdent.cpp
3>  EQStreamProxy.cpp
3>  eqtime.cpp
3>  extprofile.cpp
3>  guild_base.cpp
3>  guilds.cpp
3>  Item.cpp
3>  logsys.cpp
3>  logsys_eqemu.cpp
3>  md5.cpp
3>  misc.cpp
3>  MiscFunctions.cpp
3>  Generating Code...
3>  Compiling...
3>  moremath.cpp
3>  Mutex.cpp
3>  opcodemgr.cpp
3>  packet_dump.cpp
3>  packet_dump_file.cpp
3>  packet_functions.cpp
3>  races.cpp
3>  rdtsc.cpp
3>  rulesys.cpp
3>  serverinfo.cpp
3>  shareddb.cpp
3>  SharedLibrary.cpp
3>  StructStrategy.cpp
3>  TCPConnection.cpp
3>  TCPServer.cpp
3>  timeoutmgr.cpp
3>  timer.cpp
3>  tinystr.cpp
3>  tinyxml.cpp
3>  tinyxmlerror.cpp
3>  Generating Code...
3>  Compiling...
3>  tinyxmlparser.cpp
3>  worldconn.cpp
3>  XMLParser.cpp
3>  Generating Code...
3>Link:
3>  Zone.vcxproj -> C:\source2\trunk\EQEmuServer\zone\.\..\Build\Zone.exe
3>FinalizeBuildStatus:
3>  Deleting file "ReleaseBots\Zone.unsuccessfulbuild".
3>  Touching "ReleaseBots\Zone.lastbuildstate".
3>
3>Build succeeded.
3>
3>Time Elapsed 00:03:22.96
4>------ Rebuild All started: Project: eqlaunch, Configuration: Release Win32 ------
4>Build started 7/25/2012 4:54:33 PM.
4>_PrepareForClean:
4>  Deleting file ".\../Build/eqlaunch/Release\eqlaunch.lastbuildstate".
4>InitializeBuildStatus:
4>  Creating ".\../Build/eqlaunch/Release\eqlaunch.unsuccessfulbuild" because "AlwaysCreate" was specified.
4>ClCompile:
4>  eqlaunch.cpp
4>  worldserver.cpp
4>  ZoneLaunch.cpp
4>  debug.cpp
4>  EmuTCPConnection.cpp
4>  EmuTCPServer.cpp
4>  EQEmuConfig.cpp
4>  logsys.cpp
4>  logsys_eqemu.cpp
4>  md5.cpp
4>c:\source2\trunk\eqemuserver\common\../common/seperator.h(42): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
4>..\common\md5.cpp(61): warning C4996: '_snprintf': This function or variable may be unsafe. Consider using _snprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(363) : see declaration of '_snprintf'
4>  misc.cpp
4>  MiscFunctions.cpp
4>  Mutex.cpp
4>..\common\Mutex.cpp(128): warning C4800: 'BOOL' : forcing value to bool 'true' or 'false' (performance warning)
4>  packet_dump.cpp
4>  packet_functions.cpp
4>  ProcLauncher.cpp
4>  TCPConnection.cpp
4>  TCPServer.cpp
4>  timer.cpp
4>..\common\timer.cpp(68): warning C4244: '=' : conversion from 'time_t' to 'long', possible loss of data
4>  tinystr.cpp
4>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
4>  Generating Code...
4>  Compiling...
4>  tinyxml.cpp
4>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
4>..\common\tinyxml\tinyxml.cpp(103): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>..\common\tinyxml\tinyxml.cpp(126): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
4>..\common\tinyxml\tinyxml.cpp(718): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>..\common\tinyxml\tinyxml.cpp(726): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>..\common\tinyxml\tinyxml.cpp(944): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
4>..\common\tinyxml\tinyxml.cpp(989): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
4>..\common\tinyxml\tinyxml.cpp(1122): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
4>..\common\tinyxml\tinyxml.cpp(1129): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
4>..\common\tinyxml\tinyxml.cpp(1137): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>..\common\tinyxml\tinyxml.cpp(1144): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
4>  tinyxmlerror.cpp
4>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
4>  tinyxmlparser.cpp
4>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
4>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
4>  worldconn.cpp
4>  XMLParser.cpp
4>  Generating Code...
4>LINK : warning LNK4098: defaultlib 'LIBCMT' conflicts with use of other libs; use /NODEFAULTLIB:library
4>  eqlaunch.vcxproj -> C:\source2\trunk\EQEmuServer\eqlaunch\.\..\Build\eqlaunch.exe
4>FinalizeBuildStatus:
4>  Deleting file ".\../Build/eqlaunch/Release\eqlaunch.unsuccessfulbuild".
4>  Touching ".\../Build/eqlaunch/Release\eqlaunch.lastbuildstate".
4>
4>Build succeeded.
4>
4>Time Elapsed 00:00:15.16
5>------ Rebuild All started: Project: ucs, Configuration: Release Win32 ------
6>------ Rebuild All started: Project: queryserv, Configuration: Release Win32 ------
6>Build started 7/25/2012 4:54:48 PM.
6>_PrepareForClean:
6>  Deleting file ".\../Build/queryserv/Release\queryserv.lastbuildstate".
5>Build started 7/25/2012 4:54:48 PM.
5>_PrepareForClean:
5>  Deleting file ".\../Build/ucs/Release\ucs.lastbuildstate".
6>InitializeBuildStatus:
6>  Creating ".\../Build/queryserv/Release\queryserv.unsuccessfulbuild" because "AlwaysCreate" was specified.
5>InitializeBuildStatus:
5>  Touching ".\../Build/ucs/Release\ucs.unsuccessfulbuild".
6>ClCompile:
6>  database.cpp
5>ClCompile:
5>  chatchannel.cpp
6>  queryserv.cpp
5>  clientlist.cpp
6>  queryservconfig.cpp
5>clientlist.cpp(1012): warning C4018: '<' : signed/unsigned mismatch
5>clientlist.cpp(1314): warning C4018: '<' : signed/unsigned mismatch
5>clientlist.cpp(1317): warning C4018: '<' : signed/unsigned mismatch
5>clientlist.cpp(1427): warning C4018: '<' : signed/unsigned mismatch
5>clientlist.cpp(1430): warning C4018: '<' : signed/unsigned mismatch
5>  database.cpp
6>  worldserver.cpp
5>database.cpp(586): warning C4244: 'initializing' : conversion from 'time_t' to 'int', possible loss of data
5>  ucs.cpp
6>  BasePacket.cpp
5>  ucsconfig.cpp
6>  Condition.cpp
6>  CRC16.cpp
6>  crc32.cpp
6>  dbcore.cpp
5>  worldserver.cpp
6>..\common\dbcore.cpp(199): warning C4244: '=' : conversion from 'my_ulonglong' to 'int32', possible loss of data
6>..\common\dbcore.cpp(201): warning C4244: '=' : conversion from 'my_ulonglong' to 'int32', possible loss of data
6>  debug.cpp
5>  BasePacket.cpp
6>  emu_opcodes.cpp
5>  Condition.cpp
6>  EmuTCPConnection.cpp
5>  CRC16.cpp
5>  crc32.cpp
5>  dbcore.cpp
6>  EmuTCPServer.cpp
5>..\common\dbcore.cpp(199): warning C4244: '=' : conversion from 'my_ulonglong' to 'int32', possible loss of data
5>..\common\dbcore.cpp(201): warning C4244: '=' : conversion from 'my_ulonglong' to 'int32', possible loss of data
5>  debug.cpp
6>  EQEmuConfig.cpp
5>  emu_opcodes.cpp
5>  EmuTCPConnection.cpp
6>  EQPacket.cpp
5>  EmuTCPServer.cpp
6>..\common\EQPacket.cpp(206): warning C4244: '=' : conversion from 'const uint16' to 'unsigned char', possible loss of data
6>..\common\EQPacket.cpp(218): warning C4244: '=' : conversion from 'uint16' to 'unsigned char', possible loss of data
6>..\common\EQPacket.cpp(343): warning C4244: 'initializing' : conversion from 'unsigned long' to 'uint16', possible loss of data
6>  EQStream.cpp
5>  EQEmuConfig.cpp
6>..\common\EQStream.cpp(73): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(331): warning C4800: 'int' : forcing value to bool 'true' or 'false' (performance warning)
6>..\common\EQStream.cpp(382): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(397): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(414): warning C4244: 'argument' : conversion from 'uint64' to 'u_long', possible loss of data
6>..\common\EQStream.cpp(414): warning C4244: 'argument' : conversion from 'uint64' to 'u_long', possible loss of data
6>..\common\EQStream.cpp(539): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(551): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(602): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
6>..\common\EQStream.cpp(602): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
6>..\common\EQStream.cpp(603): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
6>..\common\EQStream.cpp(660): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(663): warning C4244: 'initializing' : conversion from 'long' to 'uint16', possible loss of data
6>..\common\EQStream.cpp(703): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(772): warning C4244: 'argument' : conversion from 'unsigned long' to 'u_short', possible loss of data
6>..\common\EQStream.cpp(844): warning C4244: 'argument' : conversion from 'time_t' to 'u_long', possible loss of data
6>..\common\EQStream.cpp(1082): warning C4018: '>' : signed/unsigned mismatch
6>..\common\EQStream.cpp(1119): warning C4018: '>' : signed/unsigned mismatch
6>  EQStreamFactory.cpp
5>  EQPacket.cpp
6>  EQStreamIdent.cpp
5>..\common\EQPacket.cpp(206): warning C4244: '=' : conversion from 'const uint16' to 'unsigned char', possible loss of data
5>..\common\EQPacket.cpp(218): warning C4244: '=' : conversion from 'uint16' to 'unsigned char', possible loss of data
5>..\common\EQPacket.cpp(343): warning C4244: 'initializing' : conversion from 'unsigned long' to 'uint16', possible loss of data
5>  EQStream.cpp
6>  EQStreamProxy.cpp
5>..\common\EQStream.cpp(73): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(331): warning C4800: 'int' : forcing value to bool 'true' or 'false' (performance warning)
5>..\common\EQStream.cpp(382): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(397): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(414): warning C4244: 'argument' : conversion from 'uint64' to 'u_long', possible loss of data
5>..\common\EQStream.cpp(414): warning C4244: 'argument' : conversion from 'uint64' to 'u_long', possible loss of data
5>..\common\EQStream.cpp(539): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(551): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(602): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
5>..\common\EQStream.cpp(602): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
5>..\common\EQStream.cpp(603): warning C4244: 'argument' : conversion from 'long' to 'uint16', possible loss of data
5>..\common\EQStream.cpp(660): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(663): warning C4244: 'initializing' : conversion from 'long' to 'uint16', possible loss of data
5>..\common\EQStream.cpp(703): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(772): warning C4244: 'argument' : conversion from 'unsigned long' to 'u_short', possible loss of data
5>..\common\EQStream.cpp(844): warning C4244: 'argument' : conversion from 'time_t' to 'u_long', possible loss of data
5>..\common\EQStream.cpp(1082): warning C4018: '>' : signed/unsigned mismatch
5>..\common\EQStream.cpp(1119): warning C4018: '>' : signed/unsigned mismatch
5>  EQStreamFactory.cpp
6>  logsys.cpp
5>  EQStreamIdent.cpp
6>  Compiling...
6>  logsys_eqemu.cpp
6>  md5.cpp
6>c:\source2\trunk\eqemuserver\common\../common/seperator.h(42): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\md5.cpp(61): warning C4996: '_snprintf': This function or variable may be unsafe. Consider using _snprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(363) : see declaration of '_snprintf'
6>  misc.cpp
5>  Compiling...
5>  EQStreamProxy.cpp
6>  MiscFunctions.cpp
5>  logsys.cpp
6>  moremath.cpp
5>  logsys_eqemu.cpp
6>  Mutex.cpp
5>  md5.cpp
5>c:\source2\trunk\eqemuserver\common\../common/seperator.h(42): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\md5.cpp(61): warning C4996: '_snprintf': This function or variable may be unsafe. Consider using _snprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(363) : see declaration of '_snprintf'
5>  misc.cpp
6>..\common\Mutex.cpp(128): warning C4800: 'BOOL' : forcing value to bool 'true' or 'false' (performance warning)
6>  opcodemgr.cpp
5>  MiscFunctions.cpp
6>  packet_dump.cpp
5>  moremath.cpp
6>  packet_dump_file.cpp
5>  Mutex.cpp
5>..\common\Mutex.cpp(128): warning C4800: 'BOOL' : forcing value to bool 'true' or 'false' (performance warning)
5>  opcodemgr.cpp
6>  packet_functions.cpp
6>  rdtsc.cpp
5>  packet_dump.cpp
6>  rulesys.cpp
5>  packet_dump_file.cpp
6>..\common\rulesys.cpp(177): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(40): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(240): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(241): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(281): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(282): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(289): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(290): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(292): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(314): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(315): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(316): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(317): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(318): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(319): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(320): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(321): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(397): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(398): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(401): warning C4305: '=' : truncation from 'double' to 'float'
6>c:\source2\trunk\eqemuserver\common\ruletypes.h(402): warning C4305: '=' : truncation from 'double' to 'float'
6>  serverinfo.cpp
6>..\common\serverinfo.cpp(32): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(48): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(53): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(57): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(61): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(66): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(70): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(74): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(81): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(85): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(89): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(93): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\serverinfo.cpp(97): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>  packet_functions.cpp
6>  SharedLibrary.cpp
6>..\common\SharedLibrary.cpp(112): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>  StructStrategy.cpp
5>  rdtsc.cpp
5>  rulesys.cpp
6>  TCPConnection.cpp
5>..\common\rulesys.cpp(177): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(40): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(240): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(241): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(281): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(282): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(289): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(290): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(292): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(314): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(315): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(316): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(317): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(318): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(319): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(320): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(321): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(397): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(398): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(401): warning C4305: '=' : truncation from 'double' to 'float'
5>c:\source2\trunk\eqemuserver\common\ruletypes.h(402): warning C4305: '=' : truncation from 'double' to 'float'
5>  serverinfo.cpp
6>  TCPServer.cpp
5>..\common\serverinfo.cpp(32): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(48): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(53): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(57): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(61): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(66): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(70): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(74): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(81): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(85): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(89): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(93): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\serverinfo.cpp(97): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>  SharedLibrary.cpp
6>  timeoutmgr.cpp
5>..\common\SharedLibrary.cpp(112): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>  StructStrategy.cpp
6>  timer.cpp
5>  TCPConnection.cpp
6>..\common\timer.cpp(68): warning C4244: '=' : conversion from 'time_t' to 'long', possible loss of data
6>  tinystr.cpp
6>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
5>  TCPServer.cpp
6>  Compiling...
6>  tinyxml.cpp
6>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
6>..\common\tinyxml\tinyxml.cpp(103): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>..\common\tinyxml\tinyxml.cpp(126): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
6>..\common\tinyxml\tinyxml.cpp(718): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>..\common\tinyxml\tinyxml.cpp(726): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>..\common\tinyxml\tinyxml.cpp(944): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
6>..\common\tinyxml\tinyxml.cpp(989): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
6>..\common\tinyxml\tinyxml.cpp(1122): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
6>..\common\tinyxml\tinyxml.cpp(1129): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
6>..\common\tinyxml\tinyxml.cpp(1137): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>..\common\tinyxml\tinyxml.cpp(1144): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
6>  tinyxmlerror.cpp
5>  timeoutmgr.cpp
6>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
6>  tinyxmlparser.cpp
6>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
6>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
6>  unix.cpp
6>  worldconn.cpp
5>  Compiling...
5>  timer.cpp
5>..\common\timer.cpp(68): warning C4244: '=' : conversion from 'time_t' to 'long', possible loss of data
5>  tinystr.cpp
6>  XMLParser.cpp
5>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
5>  tinyxml.cpp
5>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
5>..\common\tinyxml\tinyxml.cpp(103): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>..\common\tinyxml\tinyxml.cpp(126): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(105) : see declaration of 'strcpy'
5>..\common\tinyxml\tinyxml.cpp(718): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>..\common\tinyxml\tinyxml.cpp(726): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>..\common\tinyxml\tinyxml.cpp(944): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
5>..\common\tinyxml\tinyxml.cpp(989): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(234) : see declaration of 'fopen'
5>..\common\tinyxml\tinyxml.cpp(1122): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
5>..\common\tinyxml\tinyxml.cpp(1129): warning C4996: 'sscanf': This function or variable may be unsafe. Consider using sscanf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(325) : see declaration of 'sscanf'
5>..\common\tinyxml\tinyxml.cpp(1137): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>..\common\tinyxml\tinyxml.cpp(1144): warning C4996: 'sprintf': This function or variable may be unsafe. Consider using sprintf_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\stdio.h(371) : see declaration of 'sprintf'
5>  tinyxmlerror.cpp
5>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
5>  tinyxmlparser.cpp
5>c:\source2\trunk\eqemuserver\common\tinyxml\tinyxml.h(280): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
5>          c:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\include\string.h(188) : see declaration of 'strncpy'
5>  unix.cpp
5>  worldconn.cpp
6>Link:
6>  Generating code
5>  XMLParser.cpp
5>LINK : fatal error LNK1104: cannot open file '.\..\Build\Chatserver.exe'
5>
5>Build FAILED.
5>
5>Time Elapsed 00:00:23.73
6>  Finished generating code
6>  queryserv.vcxproj -> C:\source2\trunk\EQEmuServer\queryserv\.\..\Build\Chatserver.exe
6>FinalizeBuildStatus:
6>  Deleting file ".\../Build/queryserv/Release\queryserv.unsuccessfulbuild".
6>  Touching ".\../Build/queryserv/Release\queryserv.lastbuildstate".
6>
6>Build succeeded.
6>
6>Time Elapsed 00:00:25.55
========== Rebuild All: 5 succeeded, 1 failed, 0 skipped ==========

I found out something interesting as well... If I right click on queryserv
and go to project Build queryserv only it succeeds by itself.
Also I can get all projects to compile by them self.

But when I try to compile the entire Build normally like you're suppose to
it does what the above build report says. Any ideas?
Side note I am using rev 2112 to build it. And yes I am aware that isn't the latest rev.