Go Back   EQEmulator Home > EQEmulator Forums > Development > Development::Tools

Development::Tools 3rd Party Tools for EQEMu (DB management tools, front ends, etc...)

Reply
 
Thread Tools Display Modes
  #121  
Old 09-19-2014, 10:17 PM
Zaela_S
Hill Giant
 
Join Date: Jun 2012
Posts: 216
Default

Quote:
Originally Posted by Gnomish1987 View Post
If one did use a PNG in lieu of a BMP, could one delete the parallel BMP files and the PNG ones would be loaded in their place even with an old zone/model? (For instance, if I wanted to make a brown Old Froglok to overwrite the base Old Froglok texture.)
Yeah. The client has no expectations about what format a particular image will be in. Any BMP or DDS file could be replaced with a PNG or JPEG without problems. It just looks at whatever's there, sees if it can figure out the format it's in, and sends it off to the correct decoder for that format.

The only caveat is that, due to internal references in the .wld files, the name of the image file needs to be exactly the same as the original one you want to replace, including the extension. So if you wanted to replace "frglg0101.bmp" with a PNG, that PNG would need to be renamed to "frglg0101.bmp". The extension doesn't really matter. I'm pretty sure some of the official texture updates for older zones are actually DDS files even though they have a ".bmp" extension -- changing the names inside the .wld is a bit of a pain.

Quote:
Originally Posted by Gnomish1987 View Post
However, while I can get full use out of the Model Viewer, EQGExport still doesn't want to play nice. It simply opens, prompts for the S3D directory, populates the list of .s3d files, then does nothing further. I'm able to select a given .s3d file, but nothing comes up on the next column. Right-clicking does nothing.
Now that I'm really not sure what to say to :( Both tools are pretty much identical up to the point where it decides exactly what should show up in the second column. Right-click should bring up a the menu regardless, too... I re-uploaded my most recent files just in case that helps (zlib is now included too).


Maybe I should actually make a thread for EQGExport ;p
Reply With Quote
  #122  
Old 09-19-2014, 11:25 PM
jdoran
Hill Giant
 
Join Date: Jul 2012
Posts: 212
Default

What is the benefit of converting zones to EQG?

I think it is great that tools like this are being worked on.

I must admit that I like the s3d zones since I can use their models in other zones. Would these EQG tools provide a similar function?
Reply With Quote
  #123  
Old 09-21-2014, 04:02 PM
Packet's Avatar
Packet
Hill Giant
 
Join Date: Jun 2010
Location: Omicron Percei-8
Posts: 106
Default

Everything I've done uses png textures instead of DDS and BMP. I've noticed the file-size decrease to be well worth it. Also, the alpha channel with png files can be used if you choose the right shader for the material.
__________________
Packet Loss
Current project:
Dark Horizons

Formerly "Richardo"
Reply With Quote
  #124  
Old 09-21-2014, 05:32 PM
Zaela_S
Hill Giant
 
Join Date: Jun 2012
Posts: 216
Default

Quote:
Originally Posted by jdoran View Post
What is the benefit of converting zones to EQG?
Mostly to make them compatible with this tool ;p EQG format zones are easier to work with in a lot of ways...

I'm just getting started re-writing this tool; when I'm done I should easily be able to add the ability to export placeable object models from one zone to another, and improve the s3d converter to be more complete (placeable objects, vertex colors, maybe alpha texture detection, etc).
Reply With Quote
  #125  
Old 09-21-2014, 07:36 PM
rhyotte
Hill Giant
 
Join Date: Jul 2012
Location: Oklahoma
Posts: 222
Default

So many cool tools popping up....and Sony just posted a 2 billion loss...

Here's to hoping!
Reply With Quote
  #126  
Old 11-12-2014, 10:37 PM
Akkadius's Avatar
Akkadius
Administrator
 
Join Date: Feb 2009
Location: MN
Posts: 2,072
Default

Stickied thread
Reply With Quote
  #127  
Old 04-01-2015, 02:35 PM
Packet's Avatar
Packet
Hill Giant
 
Join Date: Jun 2010
Location: Omicron Percei-8
Posts: 106
Default

Quote:
Originally Posted by Zaela_S View Post
Mostly to make them compatible with this tool ;p EQG format zones are easier to work with in a lot of ways...

I'm just getting started re-writing this tool; when I'm done I should easily be able to add the ability to export placeable object models from one zone to another, and improve the s3d converter to be more complete (placeable objects, vertex colors, maybe alpha texture detection, etc).
Zaela, do you have a changelog anywhere? I've been abscent for a bit due to work and school. I'm uncertain if the original issues I had with your tool are still present.
__________________
Packet Loss
Current project:
Dark Horizons

Formerly "Richardo"
Reply With Quote
  #128  
Old 04-02-2015, 11:02 PM
Zaela_S
Hill Giant
 
Join Date: Jun 2012
Posts: 216
Default

I doubt I changed anything since you last saw it.
Reply With Quote
  #129  
Old 04-06-2015, 11:58 AM
lakedoo23
Sarnak
 
Join Date: Oct 2014
Posts: 30
Default

Zaela, I was going to attempt reverse engineering the EQG format, but I was hoping you might have some documentation laying around?
Reply With Quote
  #130  
Old 04-07-2015, 12:18 AM
Zaela_S
Hill Giant
 
Join Date: Jun 2012
Posts: 216
Default

Quote:
Originally Posted by lakedoo23 View Post
Zaela, I was going to attempt reverse engineering the EQG format, but I was hoping you might have some documentation laying around?
Which part(s)?

The .eqg archives themselves are just differently-named .s3d archives. Several tools and sources around for opening those, although I could write something up quick about it.

If you're talking about the file types found particularly in .eqg-based stuff (.zon, .ter, .mod, .mds, .ani, etc) I could write up a bit about those too, they're all fairly straightforward.
Reply With Quote
  #131  
Old 04-07-2015, 05:37 AM
KLS
Administrator
 
Join Date: Sep 2006
Posts: 1,348
Default

The project has several zone utilities (https://github.com/EQEmu/zone-utilities) as well that includes code for reading all the known formats and are largely complete other than things we don't care about like animation.

Not exactly documentation but can be useful if you're trying to reverse any of the formats.
Reply With Quote
  #132  
Old 09-27-2015, 08:31 PM
Tyen05
Discordant
 
Join Date: Mar 2009
Location: eqbrowser.com
Posts: 309
Default

Ran into a small issue, wanted to see if there is any advice.

So gonna run through some images. Basically I took an edge of a hill and stretched it out to create a ramp.

First pic is me stretching it out in Maya.
Second pic is importing the obj to the EQG file.
Third pic is the viewer showing my edit.
Fourth pic is ingame where the edit is not showing up.

Basically my question is, when I edit a zone and import it, is there another step to make those edits show up? I've removed the .s3d so its just my editted .egc in my EQ directory.











The object I'm trying to import is here: http://eqbrowser.com/misc/crushboneramp.obj
__________________
Browser based EQ project
Reply With Quote
  #133  
Old 08-03-2017, 04:26 AM
Gnomish1987
Fire Beetle
 
Join Date: Dec 2010
Posts: 9
Default

I'm looking to make minor additions to a few old .s3d zones for my own use, such as adding extra alleyways, buildings, caves, etc. for things like new guildhalls in cities. However, a (rather sloppy) test with EQG Zone Importer quickly reminded me that objects and water are lost in the conversion from .s3d to .eqg, unfortunately.

OpenZone doesn't seem to be an option because the documentation is so outdated/sparse and it doesn't allow importation of .s3d files, but on the other hand, EQG Zone Importer's conversion process leaves the zone unusable due to lack of objects and water.

Is there some way of achieving what I want either through EQG Zone Importer or a combination of it and OpenZone? Again, I want to make additions to .s3d city zones without losing objects/water. (I'm not interested in modifying the newer .eqg zones instead, as my goal is to make new landmarks using the blocky, distinctive aesthetic of zones from Classic through Velious.)

Maybe I ought to make a standalone thread...
Reply With Quote
  #134  
Old 02-07-2021, 08:41 PM
jim001
Fire Beetle
 
Join Date: Apr 2019
Location: A.Z.
Posts: 3
Default S3D Zone Exporter v0.2 && EQG Zone Importer 1.2

Does anyone know if there are any later versions of these?
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 10:26 PM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3