Go Back   EQEmulator Home > EQEmulator Forums > Development > Development::Bots

Development::Bots Forum for bots.

Reply
 
Thread Tools Display Modes
  #1  
Old 01-31-2018, 09:05 PM
Uleat's Avatar
Uleat
Developer
 
Join Date: Apr 2012
Location: North Carolina
Posts: 2,815
Default Bot AI Re-work

The bot ai processing code was horrifically out-of-date...

It has been re-worked to take advantage of the recent changes in positional updating.

The end result is that bots have a more 'natural' look about them - or as natural as can be had in the current environment.


In addition, several 'features' have been added.


Bot Leashing

Bots will now be limited to how far they can travel - both in- and out- of combat.

They will also have a 'leash owner.' This owner is determined by the group they belong to. Any bot in a group whose leader is a client, that
client becomes the leash owner. If a non-client is assigned as group leader, the leash owner defaults to the bot's owner. All limitations are
based on this secondary owner.

Combat will break, regardless of hate, if either the target gets too far away from the bot or if the bot gets too far away from its leash owner.


Main Assist

Bots will now obey the targeting of a 'main assist' - if one exists.

To set this, just assign the role of 'Main Assist' to one of your group members. This only applies to groups that contain clients. 'Botgroup'
groups do not yet have this functionality - even if their owner has assigned it in their own group.


Combat Abort

Combat may now be aborted if the owner turns off auto-attack. This only applies if the target contains no hate for both the bot and owner. Each
bot must be processed, so aggro may be returned if hate is discovered during the abort process.

Line-of-sight issues will also cancel combat (until LoS is re-acquired) if both the bot and owner lose sight of the target.


Combat Jitter

In addition to the existing 'rogue' jitter code, new conditionals exist for non-'rogue' classes.

Melee classes will 'randomly' adjust themselves on an arc around their target.

Melee and caster classes both have 'back-off' code based on their combat range.

All jitter code is dependent on the bot not being the target of their target (!HasTargetReflection().) So, a summoned bot will adjust their distance
once they are able to.


These are 'rc' changes, so please report any issues.
__________________
Uleat of Bertoxxulous

Compilin' Dirty
Reply With Quote
  #2  
Old 01-31-2018, 11:50 PM
rhyotte
Hill Giant
 
Join Date: Jul 2012
Location: Oklahoma
Posts: 222
Default

Nice! Man I really need to go ahead and roll up another server to tinker with.
Reply With Quote
  #3  
Old 02-01-2018, 01:49 AM
Proxeeus
Fire Beetle
 
Join Date: May 2005
Posts: 27
Default

Thank you so much Uleat for those changes, I cannot wait to try them!
Reply With Quote
  #4  
Old 02-01-2018, 02:44 PM
jpyou127's Avatar
jpyou127
Discordant
 
Join Date: Nov 2005
Posts: 270
Default

Uleat, has anyone updated the current BOT binaries that can be downloaded with the update tool?
Reply With Quote
  #5  
Old 02-01-2018, 05:52 PM
Uleat's Avatar
Uleat
Developer
 
Join Date: Apr 2012
Location: North Carolina
Posts: 2,815
Default

I think Akkadius and I are (were) the only ones with that access.

Regardless, he is VERY busy at the moment and I have no idea if I still have access to that repo, much less if I can remember the password...

I'll see if we can't work something out.
__________________
Uleat of Bertoxxulous

Compilin' Dirty
Reply With Quote
  #6  
Old 02-01-2018, 09:43 PM
Uleat's Avatar
Uleat
Developer
 
Join Date: Apr 2012
Location: North Carolina
Posts: 2,815
Default

I adjusted the rogue bot's melee distance when behind a mob - they really should be close to perform any back-stab attack.


Also, there does seem to be quite a bit of 'after-adjusting' going on when the jitter code hits.

I'll probably make a new 'plot' function that keeps them on their current arc around their target to avoid forward movement adjustments when they jitter.
__________________
Uleat of Bertoxxulous

Compilin' Dirty
Reply With Quote
  #7  
Old 02-02-2018, 12:05 AM
jia_jacky's Avatar
jia_jacky
Sarnak
 
Join Date: May 2005
Posts: 37
Default

Great! If I understand correctly you will continue to work on this, right?
I noticed that spell classes bot didn't know to avoid attacking or back off when mobs turned to hit them. And female dwarf bot always has beard.
So could you consider improving this? Just a expectation.
Reply With Quote
  #8  
Old 02-02-2018, 12:24 AM
Uleat's Avatar
Uleat
Developer
 
Join Date: Apr 2012
Location: North Carolina
Posts: 2,815
Default

Caster bots still don't know how to turn down the hate..that's still handled in the spell ai portion.

I can look into that at some point. (No comment on the dwarves...)
__________________
Uleat of Bertoxxulous

Compilin' Dirty
Reply With Quote
  #9  
Old 02-02-2018, 02:36 AM
jia_jacky's Avatar
jia_jacky
Sarnak
 
Join Date: May 2005
Posts: 37
Default

Choosing spells to control the hate might be too complex. Perhaps when caster bots were hit by melee attack they could run away or back up a few steps instead of standing at the same place waiting to be hit.
Reply With Quote
  #10  
Old 02-02-2018, 03:13 AM
Akkadius's Avatar
Akkadius
Administrator
 
Join Date: Feb 2009
Location: MN
Posts: 2,071
Default

Quote:
Originally Posted by Uleat View Post
I think Akkadius and I are (were) the only ones with that access.

Regardless, he is VERY busy at the moment and I have no idea if I still have access to that repo, much less if I can remember the password...

I'll see if we can't work something out.
Added you to EQEmuInstall repo
Reply With Quote
  #11  
Old 02-02-2018, 02:54 PM
Proxeeus
Fire Beetle
 
Join Date: May 2005
Posts: 27
Default

Tried those changes with a fresh compile tonight and.... my bots no longer cast any kind of spells. Strange. Dunno if this is due to the global npc spellcasting AI rework or not though.
Reply With Quote
  #12  
Old 02-02-2018, 05:37 PM
Proxeeus
Fire Beetle
 
Join Date: May 2005
Posts: 27
Default

Small update: after adding the "min_hp" and "max_hp" columns to the bots spells entries table, the issue resolved itself. Maybe those are missing from the bot db update script?
Reply With Quote
  #13  
Old 02-02-2018, 06:47 PM
Uleat's Avatar
Uleat
Developer
 
Join Date: Apr 2012
Location: North Carolina
Posts: 2,815
Default

Those are new fields to the 'main' db and it looks like we'll have to update - thanks for that report!

(I thought that I had verified bot casting during that work..but, it may have been before the actual fields being added.)


On caster bots backing away, they do back out of melee range when they are no longer the target of their attacker.

It has to be done this way or the mob constantly pursues them and your 'combat arena' is forever moving.

I tested it without that 'reflection' feature and had to constantly move to stay near the action...


EDIT: Thanks Akkadius!
__________________
Uleat of Bertoxxulous

Compilin' Dirty
Reply With Quote
  #14  
Old 02-04-2018, 05:29 AM
Proxeeus
Fire Beetle
 
Join Date: May 2005
Posts: 27
Default

Great changes all around !

While we're on the subject of AI refinements, I was wondering if it'd be somehow possible to have the Bot AI work while in "Guard" mode?

By that, I mean that as soon as Bots enter "Guard" mode, they stop meditating and/or casting/rebuffing - you need to make them Follow you again to have their AI resume the work, and it's a bit hard to manage all that while camping at a spot in a dungeon. (this behavior has been present for ages, it's not a bug report about the current changes)

Dunno if I made myself clear, but that'd be a nice improvement !
Reply With Quote
  #15  
Old 02-04-2018, 06:37 PM
Uleat's Avatar
Uleat
Developer
 
Join Date: Apr 2012
Location: North Carolina
Posts: 2,815
Default

Ultimately, I want to see Bots become a pseudo-player object rather than just an advanced npc 'pet' .. so, changes I make will bear that where possible.

I do see what you're saying with the 'Guard' command. I'll look into a change for that.
__________________
Uleat of Bertoxxulous

Compilin' Dirty
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 01:51 AM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3