Cannon's Fury Server

[cannon]

Can I get someone to please log in to Cannon's Fury for a quick test. Server has been up a few days and not sure anyone can get in. Thanks.

[Ansley1]

Didn't work for me with UF client. Lemme try titanium

[Ansley1]

No go on Titanium or RoF client.

[ghanja]

The most common causes of this are usually an IP entry in the eqemu_config.xml when it's not necessary and/or port forwarding.

Post your eqemu_config.xml while minding your usernames, passwords and randomstring (i.e. omitting them).

And what firewall software and/or router do you use?

[cannon]

I just set up port forwarding, its been many years since Ive had a server up and a little rusty. Should be good now. I hope.

[cannon]

Still looking for feedback. Thanks.

[cannon]

Ok so I had to uncomment the external and internal ip address in the config file. duh. please let me know if you can log in to the server now. Thanks.

[Excuses]

Mine are commented out but i connect threw eqemu loginserver.

How are you connecting to it?

[cannon]

duplicate post sorry

[cannon]

i also forwarded the UDP ports for all of the ports used.

[cannon]

Originally Posted by ghanja

The most common causes of this are usually an IP entry in the eqemu_config.xml when it's not necessary and/or port forwarding.

Post your eqemu_config.xml while minding your usernames, passwords and randomstring (i.e. omitting them).

And what firewall software and/or router do you use?

<?xml version="1.0">
<server>
<world>
<!-- Set the shortname to ONE word. The longname is what shows up on server list -->
<shortname>cannons_fury</shortname>
<longname>!!!Cannons Fury {Custom Solo NPC Buffs] Test Buff</longname>

<!-- DO NOT EDIT ANY LINES BETWEEN HERE AND THE DATABASE SECTION -->
<address>24.209.54.146</address>
<localaddress>192.168.0.10</localaddress>

<!-- Loginserver information. DO NOT EDIT -->
<loginserver>
<host>login.eqemulator.net</host>
<port>5998</port>
<account>cannon</account>
<password>mypassword</password>
</loginserver>

<!-- Sets the ip/port for the tcp connections. DO NOT EDIT -->
<!-- <tcp ip="127.0.0.1" port="9000" telnet="disable"/> -->
<tcp ip="127.0.0.1" port="9000" telnet="enable"/>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>longrandomkey12345lifelessf</key>

<!-- Enable and set the port for the HTTP service. Defaults are shown -->
<!-- <http port="9080" enabled="false" mimefile="mime.types" /> -->
<http port="9080" enabled="true" mimefile="mime.types" />
</world>

<!-- Chatserver (channels) information. DO NOT EDIT -->
<chatserver>
<!-- <host>192.168.1.x</host> -->
<!-- <port>10234</port> -->
<host>192.168.10</host>
<port>10234</port>
</chatserver>

<!-- Mailserver (in-game mail) information. DO NOT EDIT -->
<mailserver>
<!-- <host>192.168.1.x</host> -->
<!-- <port>7778</port> -->
<host>192.168.0.10</host>
<port>10234</port>
</mailserver>

<zones>
<!-- The defaultstatus is what status the new toons will have on your server -->
<defaultstatus>0</defaultstatus>

<!-- Sets port range for world to use to auto configure zones DO NOT EDIT RIGHT NOW-->
<!-- <ports low="7000" high="7100"/> -->
<ports low="7000" high="7400"/>
</zones>

<!-- Set username to root and password is your MySQL password and db to peq -->
<database>
<!-- <host>127.0.0.1</host> -->
<!-- <port>3306</port> -->
<!-- <username>root</username> -->
<!-- <password>xxxxx</password> -->
<!-- <db>peq</db> -->
<host>127.0.0.1</host>
<port>3306</port>
<username>root</username>
<password>mypassword</password>
<db>cannondatabase</db>
</database>

<qsdatabase>
<!-- <host>127.0.0.1</host> -->
<!-- <port>3306</port> -->
<!-- <username>root</username> -->
<!-- <password>xxxxx</password> -->
<!-- <db>peq</db> -->
<host>127.0.0.1</host>
<port>3306</port>
<username>root</username>
<password>mypassword</password>
<db>cannondatabase</db>
</qsdatabase>

<!-- Launcher Configuration DO NOT EDIT-->
<launcher>
<!-- <logprefix>logs/zone-</logprefix> -->
<!-- <logsuffix>.log</logsuffix> -->
<!-- <exe>zone.exe</exe> -->
<!-- <timers restart="10000" reterminate="10000"> -->
<!-- <timers restart="200" reterminate="200" initial="200" interval="200"/> -->
</launcher>

<!-- File locations. DO NOT EDIT -->
<files>
<!-- <spells>spells_us.txt</spells> -->
<!-- <opcodes>opcodes.conf</opcodes> -->
<!-- <logsettings>log.ini</logsettings> -->
<!-- <eqtime>eqtime.cfg</eqtime> -->
</files>
<!-- Directory locations. DO NOT EDIT -->
<directories>
<!-- <maps>Maps</maps> -->
<!-- <quests>quests</quests> -->
<!-- <plugins>plugins</plugins> -->
</directories>
</server>

[ghanja]

<!-- DO NOT EDIT ANY LINES BETWEEN HERE AND THE DATABASE SECTION -->
<!-- <address>24.209.54.146</address>
<!-- <localaddress>192.168.0.10</localaddress>

Unless you have some VLAN, involved routing, etc. going on, the above should probably stay commented.

Though, that brings me to the second part of my question from above. What are you working behind? (router, L3 switch, firewall, what?)

[cannon]

Originally Posted by ghanja

<!-- DO NOT EDIT ANY LINES BETWEEN HERE AND THE DATABASE SECTION -->
<!-- <address>24.209.54.146</address>
<!-- <localaddress>192.168.0.10</localaddress>

Unless you have some VLAN, involved routing, etc. going on, the above should probably stay commented.

Though, that brings me to the second part of my question from above. What are you working behind? (router, L3 switch, firewall, what?)

Belkin modem/router i can still log in from my network but no one outside my network can login. Is there a place somewhere my external IP address has to be?

[Excuses]

comment the address and local address out, and from the looks of it the server has 7 users online atm.

[cannon]

The seven online were all on my network. can you log in to my server? I have to assume that somewhere in the config file has to be my external IP address for this to work right?