a few questions from someone new to EQ and EQemu

[kira1000]

Hello, I just found out about this project and am quite interested, I have a few questions though if no-one minds, they are:

1. What exactly is a progression server? Have seen it mentioned several times before
2. Are there any good solo progression server repacks? I want to make a LAN server for me and my brother, but want to make it staggered
3. Which client is the Steam FTP one in the titanium/UF etc list?
4. (more of a generalisation) what is the bandwidth usage of EQ normally? Just in case I can't make my own server for LAN/offline play.

thank you very much, really eager to get into EQ

[Maze_EQ]

1. What exactly is a progression server? Have seen it mentioned several times before
2. Are there any good solo progression server repacks? I want to make a LAN server for me and my brother, but want to make it staggered
3. Which client is the Steam FTP one in the titanium/UF etc list?
4. (more of a generalisation) what is the bandwidth usage of EQ normally? Just in case I can't make my own server for LAN/offline play.

1. Progression starts out in vanilla EQ and moves to expansions based on time or based on kill tasks of certain raid targets.

2. Nope.

3. RoF2 is the current up to date client. You will not be able to use the live f2p client. You can sail the seas for the client though.

4. It literally takes nothing. Upwards of 70 people on my server daily and I burst to 3mbps up MAYBE.

[kira1000]

Thanks for the quick response, I noticed Akka's installer, could I make that into a progression server at all? How hard would it be? Thanks again

[N0ctrnl]

The "progression" part is easy. Just turn off expansions until you're ready for them. Getting the content back to an older state is much more challenging, however.

[MarcusD]

Originally Posted by Maze_EQ

3. RoF2 is the current up to date client. You will not be able to use the live f2p client. You can sail the seas for the client though.

Been sailing but have spotted no palm tree's bearing seeds.

[Maze_EQ]

It's more of a buried treasure chest.

[RetroEQ]

Originally Posted by N0ctrnl

The "progression" part is easy. Just turn off expansions until you're ready for them. Getting the content back to an older state is much more challenging, however.

How do you turn off expansions? What table in the database?

[blackdragonsdg]

The old method was to set the expansions value in the variable table. The current value for that is 16383 which you get by using 2^N -1 where N is the expansion number. That particular method doesn't appear to have been updated for quite some time now.

Another method is to set min_level or min_status in the zone table then update it or change it whenever the players complete a specific task. This method will probably use quest_globals or heavy scripting

It may be possible to accomplish this by other methods as well.

[RetroEQ]

Originally Posted by blackdragonsdg

The old method was to set the expansions value in the variable table. The current value for that is 16383 which you get by using 2^N -1 where N is the expansion number. That particular method doesn't appear to have been updated for quite some time now.

Another method is to set min_level or min_status in the zone table then update it or change it whenever the players complete a specific task. This method will probably use quest_globals or heavy scripting

It may be possible to accomplish this by other methods as well.

Very cool was not aware of the variables table. I set min status on the zones in the zone table and that works pretty well. Do you know how to edit the server code? Does eqemu give us the files to edit our server code or just the database?

[blackdragonsdg]

I know how to make minor changes to the source code but I usually get in over my head really quickly. You can use Visual Studio to edit the source and compile your own binaries. Not sure what the most commonly used version is atm. The database can be altered through command line or with something along the lines of Navicat or HeidiSQL.

Visual Studio - https://www.visualstudio.com/en-us/n...munity-vs.aspx

Source Code - https://github.com/EQEmu/Server/

Most recent database - edit.peqtgc.com/weekly/peq_beta.zip

[DanCanDo]

The wiki helps with some things :

http://wiki.eqemulator.org/p?Main

[RetroEQ]

Originally Posted by blackdragonsdg

I know how to make minor changes to the source code but I usually get in over my head really quickly. You can use Visual Studio to edit the source and compile your own binaries. Not sure what the most commonly used version is atm. The database can be altered through command line or with something along the lines of Navicat or HeidiSQL.

Visual Studio - https://www.visualstudio.com/en-us/n...munity-vs.aspx

Source Code - https://github.com/EQEmu/Server/

Most recent database - edit.peqtgc.com/weekly/peq_beta.zip

Ohh sexy . Looks like we have our work cut out for us though, tough stuff, but at least we can edit and recompile! That is really amazing. Yup using heidi right now on the database and am doing some major work retweaking spawn times lol. Tough thing to do with 150,000 lines to work with. Never had to give my processor a break before! I can only "find and replace" 3,000 lines at a time before it seems my processor's memory cache fills up and it slows to a crawl so I have to exit heidi and reenter and it is back up to speed.

Originally Posted by DanCanDo

The wiki helps with some things :

http://wiki.eqemulator.org/p?Main

Will search there first next time appreciate it