Custom Augments

[Randymarsh9]

I want to make some custom augments that can only be put into a certain type of armor. The armor has slots with type 15 augs, but Idk how to actually make a type 15 aug because I noticed that type 8 are actually 128, so Im not sure what to do

[trevius]

The wiki has tons of good information like that. Try this:

http://www.eqemulator.net/wiki/wikka...uDBSchemaitems

And look for "augtype".

[Shendare]

If Type 8 maps to code 128, then it sounds like a binary flag field shifted once right.

If that's the case, then the number for Type 15 would be 16384.

2 ^ (8 - 1) = 128
2 ^ (15 - 1) = 16384

- Shendare

[Randymarsh9]

ok that worked for making them type 15. Is there a way to let people put more than 1 of the same augment in a piece of armor?

[Capheus]

You can't put the same aug in a piece of gear. Also, augs for shields or type 8's, causes the item to be unequippable. Been trying several workarounds but haven't gotten anything to work yet.

[Randymarsh9]

I mean is there some rule I can change to let people be able to do that

[trevius]

Originally Posted by Capheus

You can't put the same aug in a piece of gear. Also, augs for shields or type 8's, causes the item to be unequippable. Been trying several workarounds but haven't gotten anything to work yet.

Type 8 augs and shield augs work just fine. Maybe you have a level req set on the aug or some other requirement that is not allowing you to equip it?

If you want to use the same augment multiple times in the same armor piece, you might be able to do it. I have never tried it, but maybe just adding multiple slots to the aug and to the item and also making sure that the augs aren't lore could work.

[Randymarsh9]

I doubt that would work because even if an aug fits in all slots, you still cant put it in a piece of armor twice