Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::General Support

Support::General Support Post all topics here having to do with errors while trying to connect to an EQEMu server but not about the setup/running of the Server itself.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-26-2006, 08:16 PM
bimlpro
Fire Beetle
 
Join Date: Jun 2006
Posts: 5
Default Removing Pending Server Error :(

Hey guys. Well i just wanted to make a server for me and a few friends in my suburb and i have been following that window 0.7.0 server setup. I have installed Mysql, Perl, Cavedudes Pack, Everquest Titanium and the actual 0.7 binaries. (+The Map Files) As of now i still don't know hw to get everything going. Firstly i click on RunEQemu on the desktop a window pops up and alot of lines show, soon later an EQlauncher.exe window shows and soon goes into sleep mode. The first window is stuck at "telling server to connect to port 7004" Then to fix that i run zone.exe . It completes and goes into sleep mode. Then i run Start MS-DOS batch file. Some more lines appear on the first window from RunEqEmu then lines which say pending server 1 then removing pending server 1 it continues i once got up to pending server 19 i think. This happens with the zones i think because thats what i see near this error. Here is my EQemu_config XML file.

<?xml version="1.0">
<server>
<world>
<shortname>Biml</shortname>
<longname>Biml Kingdom</longname>

<!-- Only specify these two if you really think you need to. (read: You don't) -->
<!-- <address>192.168.0.5</address> -->
<!-- <localaddress>192.168.0.5</localaddress> -->

<!-- Loginserver information. Defaults shown -->
<loginserver>
<host>eqemulator.net</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver>

<!-- Server status. Default is unlocked -->
<!--<locked/>-->
<!-- <unlocked/> -->

<!-- Sets the ip/port for the tcp connections. Both zones and console (if enabled). Defaults are shown -->
<tcp ip="localhost" port="9000" telnet="disable"/>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>some long random string</key>

<!-- Enable and set the port for the HTTP service. Defaults are shown -->
<http port="9080" enabled="false" mimefile="mime.types" />
</world>

<!-- Chatserver (channels) information. Defaults shown -->
<chatserver>
<host>channels.eqemulator.net</host>
<port>7778</port>
</chatserver>

<!-- Mailserver (in-game mail) information. Defaults shown -->
<mailserver>
<host>channels.eqemulator.net</host>
<port>7779</port>
</mailserver>

<zones>
<defaultstatus>20</defaultstatus>

<!-- Sets port range for world to use to auto configure zones -->
<ports low="7000" high="7100"/>
</zones>

<!-- Database configuration, replaces db.ini. Defaults shown -->
<database>
<host>localhost</host>
<port>3306</port>
<username>eq</username>
<password>eq</password>
<db>eq</db>
</database>

<!-- Launcher Configuration -->
<launcher>
<!-- <logprefix>logs/zone-</logprefix> -->
<!-- <logsuffix>.log</logsuffix> -->
<!-- <exe>zone.exe</exe> -->
<!-- <timers restart="10000" reterminate="10000" initial="20000" interval="2000"> -->
</launcher>

<!-- File locations. Defaults shown -->
<files>
<!-- <spells>spells_us.txt</spells> -->
<!-- <opcodes>opcodes.conf</opcodes> -->
<!-- <logsettings>log.ini</logsettings> -->
<!-- <eqtime>eqtime.cfg</eqtime> -->
</files>
<!-- Directory locations. Defaults shown -->
<directories>
<!-- <maps>Maps</maps> -->
<!-- <quests>quests</quests> -->
<!-- <plugins>plugins</plugins> -->
</directories>
</server>

Hope you guys can help me out. Thanks to all replies
Reply With Quote
  #2  
Old 06-28-2006, 10:53 PM
Belfedia
Demi-God
 
Join Date: Jan 2005
Posts: 1,109
Default

The only problem i see in your config (i'm not familiar with dark rogue installer)
Is the adress !

<!-- <address>192.168.0.5</address> -->
<!-- <localaddress>192.168.0.5</localaddress> -->

Your adress isn't your localadress
But IP adress of your internet connection.
You can find it with this site : http://whatismyip.com/
Example:
if your ip is 213.123.25.104 you must change line :
<!-- <address>213.123.25.104</address> -->
<!-- <localaddress>192.168.0.5</localaddress> -->


Becarefull if you dont have any FIX ip (ip changing some time)
You must use this kind of service : http://www.dyndns.com/
For have a "fake" real ip with a site name.
Example:
if you choose "mysite.ath.cx" for name, you must change line :
<!-- <address>mysite.ath.cx</address> -->
<!-- <localaddress>192.168.0.5</localaddress> -->
__________________
__________________________________________________ _____________________________________
I speak english like a spanish cow..., I speak spanish like a english pudding...
But I try to speak good french !!! (Non au langage SMS sur forum)
http://eqfroggy.new.fr : Froggy French Server Website.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 10:32 AM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3