Bobo... the IP address has to be your IP address... sometimes people take tutorials too literally.
My IP is 192168.1.100, not 192.168.2.13. Other than that, I too followed the instructions nearly to the letter, and was up and running in no time...
If you aren't sure, do a Start Menu -> Run -> cmd to get a good 'ol DOS window.
Type in ipconfig and press enter. You should see sumfink that tells you your IP address. That's what you enter, not the IP addy from the tutorial.
If you've done this, and the IP reported matches what you have in your LoginServer.ini, then we'll need to see your eqemu_config.xml as well, and the eqhost.txt from your client directory. These all have to be looking at the same IP address for the client -> server conversation to happen.
|
Threaded Mode
