Local Server Issues

[jshows1]

Ok I'm VERY CLOSE! At least I can login now. But when I do, there are no servers listed! lol

I know this is not a unique problem. I remember response about this same issue here:
http://www.eqemulator.org/forums/showthread.php?t=35222

So I followed his steps:

eqemu_config.xml

<?xml version="1.0">
<server>
	<world>
		<shortname>Jermanfu</shortname>
		<longname>World of Jermanfu</longname>

		<!-- Only specify these two if you really think you need to.  (read: You don't) -->
		<address>127.0.0.1</address>
		<localaddress>127.0.0.1</localaddress>

		<!-- Loginserver information.  Defaults shown -->
	</world>
		<loginserver>
			<host>127.0.0.1</host>
			<port>5998</port>
			<account>Admin</account>
			<password>Password</password>
		</loginserver>

		<!-- Server status.  Default is unlocked -->
		<!--<locked/>-->
		<!-- <unlocked/> -->

		<!-- Sets the ip/port for the tcp connections.  Both zones and console (if enabled).  Defaults are shown -->
		<tcp ip="127.0.0.1" port="9000" telnet="disable"/>

		<!-- Sets the shared key used by zone/launcher to connect to world -->
		<key>342342908712123</key>
		
		<!-- Enable and set the port for the HTTP service.  Defaults are shown -->
		<http port="9080" enabled="false" mimefile="mime.types" />

	<!-- Chatserver (channels) information.  Defaults shown -->
	<chatserver>
		<host>127.0.0.1</host>
		<port>7778</port>
	</chatserver>

	<!-- Mailserver (in-game mail) information.  Defaults shown -->
	<mailserver>
		<host>127.0.0.1</host>
		<port>7779</port>
	</mailserver>

	<zones>
		<defaultstatus>20</defaultstatus>

		<!-- Sets port range for world to use to auto configure zones -->
		<ports low="7000" high="7100"/>
	</zones>

	<!-- Database configuration, replaces db.ini.  Defaults shown -->
	<database>
		<host>127.0.0.1</host>
		<port>3306</port>
		<username>root</username>
		<password>password</password>
		<db>peq</db>
	</database>

	<!-- Launcher Configuration -->
	<launcher>
		<!-- <logprefix>logs/zone-</logprefix> -->
		<!-- <logsuffix>.log</logsuffix> -->
		<!-- <exe>zone.exe or ./zone</exe> -->
		<!-- <timers restart="10000" reterminate="10000"> -->
	</launcher>

	<!-- File locations.  Defaults shown -->
	<files>
		<!-- <spells>spells_us.txt</spells> -->
		<!-- <opcodes>opcodes.conf</opcodes> -->
		<!-- <logsettings>log.ini</logsettings> -->
		<!-- <eqtime>eqtime.cfg</eqtime> -->
	</files>
	<!-- Directory locations.  Defaults shown -->
	<directories>
		<!-- <maps>Maps</maps> -->
		<!-- <quests>quests</quests> -->
		<!-- <plugins>plugins</plugins> -->
	</directories>
</server>

login.ini

[database]
host = 127.0.0.1
port = 3306
db = PEQ
user = root
password = password
subsystem = MySQL

[options]
unregistered_allowed = TRUE
reject_duplicate_servers = FALSE
trace = TRUE
world_trace = FALSE
dump_packets_in = FALSE
dump_packets_out = FALSE
listen_port = 5998
local_network = 127.0.0.

[security]
plugin = EQEmuAuthCrypto
mode = 5

[Titanium]
port = 5998
opcodes = login_opcodes.conf

[SoD]
port = 5999
opcodes = login_opcodes_sod.conf

[schema]
account_table = tblLoginServerAccounts
world_registration_table = tblWorldServerRegistration
world_admin_registration_table = tblServerAdminRegistration
world_server_type_table = tblServerListType

eqhost.txt
[LoginServer]
Host=127.0.0.1:5998

I also noticed that I had to configure a couple of other things, so here are the database commands I used(yes I did use Admin/Password just for ease):

tblLoginServerAccounts
INSERT INTO tblLoginServerAccounts (AccountName, AccountPassword, AccountEmail, LastLoginDate, LastIPAddress) VALUES('Admin', sha('password'), 'admin@somewhere.com', now(), '127.0.0.1');

tblworldserverregistration
INSERT INTO `tblworldserverregistration` (`ServerID`, `ServerLongName`, `ServerTagDescription`, `ServerShortName`, `ServerListTypeID`, `ServerLastLoginDate`, `ServerLastIPAddr`, `ServerAdminID`, `Note`) VALUES ('1', 'World of Jermanfu', 'Ding!', 'Jermanfu', '2', NULL, NULL, '1', NULL);


So, looking at this information, is there anything I missed or typed wrong? Also, is there another file I'm forgetting to adjust? Again, everything seems to work fine except there is no server listed on the server screen.
EDIT: Uleat, to answer your question, I ended up using the eqemuloginserver.exe rev1765. I also made sure to copy all of the required files from that particular download so I wouldn't be mixing files.