Cannon's Fury Server

[ghanja]

Originally Posted by cannon

From what I am reading it may have to do with the same ports being forwarded to two different IP addresses on the network. I have security cameras that use the same port as eqemu. I will disable the forwarding to the cameras and see if that opens the right ports for the server. Thanks again for all your efforts checking out my server.

Yes, that is the intent on forwarding packets.

Disable the port forwarding for EQEMU that is conflicting with your camera (i.e. same port).

Go to your web/IP camera and change the port via the web GUI (I've yet to see a Foscam or foscam copy not have a web GUI, or any other for that matter). Then re-add change the port in the port forwarding to coincide with the changes you just made for the camera, then re-add the port that was conflicting with the camera to port forwarding for EQEMU again.

Your issue will likely then be resolved. If you run Blueiris or some other active software that communicates with your camera, be sure to change the configuration in that as well.

[cannon]

Originally Posted by ghanja

Yes, that is the intent on forwarding packets.

Disable the port forwarding for EQEMU that is conflicting with your camera (i.e. same port).

Go to your web/IP camera and change the port via the web GUI (I've yet to see a Foscam or foscam copy not have a web GUI, or any other for that matter). Then re-add change the port in the port forwarding to coincide with the changes you just made for the camera, then re-add the port that was conflicting with the camera to port forwarding for EQEMU again.

Your issue will likely then be resolved. If you run Blueiris or some other active software that communicates with your camera, be sure to change the configuration in that as well.

Thanks for the advice, I did see someone got logged in to the server today, I will go to the security camera and see if i can change the ports. Thanks again for everyones help.