sorry i took so long , been pretty busy with work.
anyways , you wanna set up your router so that it doesnt block ANYTHING in or out. Doing this isnt really good for the security of your computer but if you want to run the server , you have to do this. first put your LAN ip into the DMZ zone. Do this by clicking the Advanced tab, then to the left you will see a button called DMZ... click it. enter the last 3 numbers of your computers LAN ip (you can find this by going to start\run and typing ipconfig) check enabled and click apply. Then click firewall (your still in advanced) your gonna make a new action. Name it , click enabled , click allow, keep source and destination a * (its default) , on both ip start and ip range put a * in it , for protocol make it a * as well , and port range put a * in both of those. check always and click apply. then click virtual server (still under advanced) , check enabled , type eqemu for name , type your LAN ip in private ip , for protocol type pick both , for private port and public port type 9000 , check always and click apply.
I hope this is easier to understand.
|
Threaded Mode
